UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ruclips.net/user/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
I have a DeWalt 3400 pressure washer that did not have pressure. I originally thought the pump froze up. Found and watched this video and checked my unloader valve. It was stuck. I loosened it up and lubed it and reinstalled. Works great now. Thanks Chris! Saved me hundreds.
I just got a Ryobi RY802800 (I know, not the best, but it does have a Honda GVC Type 9 Engine). Anyway, I'm happy with it, but concerned that I might be over working it. I do give it a break between fueling, but otherwise it's under load all the time. It seems to me that keeping it under load 99% between fueling might make the the valves happier, but not so much the engine. What do you think?
I have a Lowes Power washer That built pressure and stalled I cleaned the loader valve made sure it worked and cleaned the little hole put it back together and it works like new. Thanks
It sound like something is worn in the unloader that might be letting pressure pass through it and if it's leaking an oring maybe cracked. If you take it apart you may be able to replace the orings or you can purchase a new unloader.
I'm having problems with the 2800 PSI at the pressure switch the Springs broke I want to know where the ball goes in first or the spring goes in then you bolt screws down with your plug to the office today
Thanks for the informative video. We have a Dewalt 3800 psi and looks very similar to this. Suddenly we aren’t getting any water thru it. Water in, no problem, but nothing out. May need to replace that same part
I have the same model Dewalt 3800 and the same symptom as you... water from hose into the INLET... NO WATER coming out of the OUTLET (none). Did you ever figure out what was wrong with yours? It would be great if you can let me know exactly the issue that was causing yours not to exit water so that I can focus directly on the problem with mine. Thank you in advance and Merry Christmas.
I have a Kohler 3000 series, used only couple hours if that, today after starting it, I felt that pulsating you described then water started jetting out of the seam between the copper head and the body of the pump, in the valve next to the unloader; no pressure out of the nozzle, all pressure was out of that seam as if it busted a seal. I took the copper head off but I don't know what I am looking at; the pump that comes with that pressure washer is an 8.7GA12 High Pressure Pump; I can not find it online or parts for it.
Hi Chris. I have a Honda GCV160 power washer. When I squeeze the trigger in the wand, the engine stalls. Do you know what’s wrong with my pressure washer?
Nice video!! I have a general pump T9211 pump.its 3000 PSI ,4.2 GPM pump.I am not able to get 3000 psi from it.I noticed water starts leaking out from the bypass at around 2400 psi doesn't matter how tight the adjustment screw is.My unloader is general pump zkhm.I tried to run the pump without the unloader and its producing 3000 psi at same rpms.Do you think my unloader needs any adjustment or should i get a new unloader?Thanks
My AAA pump on a DeWalt pressure washer has a problem with the ball bearing below the unloader part removed in this video sticking up in it's seat and the spring on the unloader removed cannot push it down when it should. I've had no luck getting the seat and ball out of the casting.
My washer locks up and consequencely is hard to start. It is also hard on the hand when pulling and the pump suddenly locks. What causes this? Do I need a new unloader cartridge?
Have Dewalt 3800 with 53003 pump much like in this video. Has been used only few times then pressure dropped to around 1/4 pressure and only minimal strain on engine when reaches that point . Installed new seal kit (no change) unloader seams fine ???
hello I have a Sears Craftsman power sprayer. I left over winter in my garage when I finally got a chance to use it water shot out the front of it once I started the unit up. I don't know what's going on?
Yup if the pump is not drained when winter comes and freezing temps are normal, the water freezes., expands and splits the pump. I learned that lesson myself a couple of years ago. I store mine in my basement utility room which is heated. Make sure you drain the fuel completely if you do that.
Hi, great video! I have the same model pump on my dewalt washer. Question? Can this model pump be bypassed with a return line to my tank? I having problems with my pump sometimes it chokes and won't pull water from May 100g water tank. Had the pressure washer for 6 months (new) but recently it's having this problem. Any help will be greatly appreciated. Thx!
I have a craftsman 2400 psi and the only way I can keep it running is when the handle on the wand is pulled in once I release it,it stops running! Any help would be awesome
Have a simpson PS60841, have to keep the wand trigger pulled back all the time to keep it running. Took the unloader valve apart and replaced some o rings so as the spring loaded adjuster would slide back and forth. Then inside the port in the spot where the two orings are on the unloader valve is a small port that goes back to the discharge where you connect the hose for the wand. This small port was plugged, used a hobart tip cleaner which uses tiny drill bits. Found tip cleaner at Northern tool. Also used some .035 hard welding mig wire to clean out this small port. You will need a flash light to see it.
+Travis Neuberger , some of the check valves maybe stuck open from debris that can come in from the water supply hose or sometimes the plastic cage on the check valve checks. If you can get the check valve out without it cracking you can see if it is closed correctly and if not you may be able to clean it. Always put a little grease on the oring when you install it back in. Hope this helps, sorry for the late delay, I was on vacation.
Hey man.. I have a 4400 psi Simpson pressure washer (it’s the predator 420 cc motor & EZ 4040 pump ) My machine seems like it needs to push out 1,000-1,500 more psi Do you have any advice/recommendations for fixing this?
I have a pressure washer with honda motor, I didn't use it very often but last time I did, soonest I release the trigger on the gun the motor just shot off... So what I have to do it's just keep pushing the trigger all the time... Any idea what I can do? Thanks Raudel
hi I have a karcher pressure washer HD7 11-4M all running well but hose and pressure gage flicking when I trigger the gun and pulsing.any Idea? many thanks
+Dlbachman88 When it pulsates one of the check valves is either damaged or stuck open by debris that got into the pump. Most times the pump check valves need to be replaced or cleaned.
I removed the Allen caps on the water pressure area and I can see there white plastic thing but they are stick in there, they suppose come out easy?thewarrantycenter
I have similar pressure pump that I purchased new from Lowe’s in 1997 and the salesman told me to always flush pump,after each use,with pink RV antifreeze until it runs through pump and nothing but air with a couple of drops of antifreeze comes out.The antifreeze lubricates and preserves all of internal gaskets and O-rings ect.Also drain carburetor gas bowl and drain fuel from tank and by doing this after every use I’ve never had any issue with freezing problems or pump problems or starting problems.And don’t forget to change pump oil every year.
Alguien me puede decir cómo puedo reparar mi pressure washer, tiene unas 40 horas de trabajo , es motor Honda de 4000 psi trabaja muy bien pero no succiona el jabón o el químico, que debo hacer?
i have a pressure washer that you got to have the sprayer handle pressed all the time it build up so much pressure it boggs the motor down and its a 6hp.what causes that.
I have the same issue with a 3400 psi 2.5 gpm and have only used it 2 times thought simpson pressure washer were good . I am lost. Going to replace the hole pump.
Хобби
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ruclips.net/user/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
THE ONLY ONE TO EXPLAIN IT PROPERLY SO I COULD CATCH HOW IT WORKED THANKYOU
Perfect video! I tried it right away on my washer and same problem. Now it is fixed. Thanks for taking time to make this video and help a fellow man!
I have a DeWalt 3400 pressure washer that did not have pressure. I originally thought the pump froze up. Found and watched this video and checked my unloader valve. It was stuck. I loosened it up and lubed it and reinstalled. Works great now. Thanks Chris! Saved me hundreds.
Thanks a lot. I have a Stihl RB600 and my local shops didn't want to mess with it. I watched your video and you fixed it for me. Thank you!
How funny, I was born & raised in Kings Park. Right off of 25A at the Sunken Meadow Beach exit. Thank you for the informative video
Thank you. Only video I could find to solve my problem!!
Thanks for the video , what do you think of those FNA group AAA pumps ? Do you have trouble getting parts for them?
I just got a Ryobi RY802800 (I know, not the best, but it does have a Honda GVC Type 9 Engine). Anyway, I'm happy with it, but concerned that I might be over working it. I do give it a break between fueling, but otherwise it's under load all the time. It seems to me that keeping it under load 99% between fueling might make the the valves happier, but not so much the engine. What do you think?
I have a Lowes Power washer That built pressure and stalled I cleaned the loader valve made sure it worked and cleaned the little hole put it back together and it works like new. Thanks
It sound like something is worn in the unloader that might be letting pressure pass through it and if it's leaking an oring maybe cracked. If you take it apart you may be able to replace the orings or you can purchase a new unloader.
He said to email the center for any questions you guys need to listen he is taking his time to teach us don't blow it
I'm having problems with the 2800 PSI at the pressure switch the Springs broke I want to know where the ball goes in first or the spring goes in then you bolt screws down with your plug to the office today
good job ,sir, chris
Thanks for the informative video. We have a Dewalt 3800 psi and looks very similar to this. Suddenly we aren’t getting any water thru it. Water in, no problem, but nothing out. May need to replace that same part
I have the same model Dewalt 3800 and the same symptom as you... water from hose into the INLET... NO WATER coming out of the OUTLET (none). Did you ever figure out what was wrong with yours? It would be great if you can let me know exactly the issue that was causing yours not to exit water so that I can focus directly on the problem with mine.
Thank you in advance and Merry Christmas.
@@abiseid have exactly the same issue can you tell me what the problem was?
Thanks
Tengo una maquina dewalt 4000 psi y la bomba AAA 53brd35 tiro el aceite por la parte donde donde marca el nivel que puede ser el problema?
I have a Kohler 3000 series, used only couple hours if that, today after starting it, I felt that pulsating you described then water started jetting out of the seam between the copper head and the body of the pump, in the valve next to the unloader; no pressure out of the nozzle, all pressure was out of that seam as if it busted a seal. I took the copper head off but I don't know what I am looking at; the pump that comes with that pressure washer is an 8.7GA12 High Pressure Pump; I can not find it online or parts for it.
Thanks Chris I learned a lot
Nice tutorial cris
could you show how to replace the water valves for the same pump
how do you change the inlet where the water hose connects to the pump? and do you service pumps? i have one in california
I'm your 1000th subscriber...making you money now! From huntington long island.
Dix hills, for about 16 yrs, left in 65 army, never returned, just to visit!
Thanks Buddy!
Hi Chris. I have a Honda GCV160 power washer. When I squeeze the trigger in the wand, the engine stalls. Do you know what’s wrong with my pressure washer?
Thank you for the video 👍🏻👍🏻👏🏻👏🏻
When its leaking between the head and crankcase with no pressure and what other material can i use beside ceramic
Nice video!! I have a general pump T9211 pump.its 3000 PSI ,4.2 GPM pump.I am not able to get 3000 psi from it.I noticed water starts leaking out from the bypass at around 2400 psi doesn't matter how tight the adjustment screw is.My unloader is general pump zkhm.I tried to run the pump without the unloader and its producing 3000 psi at same rpms.Do you think my unloader needs any adjustment or should i get a new unloader?Thanks
i have a 3800 psi pressure washer and lots of water comes out of the soap suction how can i repair it. it is 8 years old
My AAA pump on a DeWalt pressure washer has a problem with the ball bearing below the unloader part removed in this video sticking up in it's seat and the spring on the unloader removed cannot push it down when it should. I've had no luck getting the seat and ball out of the casting.
Where can I buy one of these?
My washer locks up and consequencely is hard to start. It is also hard on the hand when pulling and the pump suddenly locks. What causes this? Do I need a new unloader cartridge?
hi good night, i have the 3800 dewalt and the springs in my unloader damage and full of rust. how can i replace it???/
Where could orings be bought for the Simpson?
can you run a bypass hose from this kind of pump
what dose it mean when the motor engages but there is a delay in pressure ?
Have Dewalt 3800 with 53003 pump much like in this video. Has been used only few times then pressure dropped to around 1/4 pressure and only minimal strain on engine when reaches that point . Installed new seal kit (no change) unloader seams fine ???
hello I have a Sears Craftsman power sprayer. I left over winter in my garage when I finally got a chance to use it water shot out the front of it once I started the unit up. I don't know what's going on?
IT FROZE AND SPLIT THE PUMP. PUMP IS TRASH. SORRY.
Yup if the pump is not drained when winter comes and freezing temps are normal, the water freezes., expands and splits the pump. I learned that lesson myself a couple of years ago. I store mine in my basement utility room which is heated. Make sure you drain the fuel completely if you do that.
Hi, great video! I have the same model pump on my dewalt washer.
Question?
Can this model pump be bypassed with a return line to my tank?
I having problems with my pump sometimes it chokes and won't pull water from May 100g water tank. Had the pressure washer for 6 months (new) but recently it's having this problem.
Any help will be greatly appreciated.
Thx!
I have a craftsman 2400 psi and the only way I can keep it running is when the handle on the wand is pulled in once I release it,it stops running! Any help would be awesome
Have a simpson PS60841, have to keep the wand trigger pulled back all the time to keep it running.
Took the unloader valve apart and replaced some o rings so as the spring loaded adjuster would slide back and forth.
Then inside the port in the spot where the two orings are on the unloader valve is a small port that goes back to the discharge where you connect the hose for the wand.
This small port was plugged, used a hobart tip cleaner which uses tiny drill bits. Found tip cleaner at Northern tool.
Also used some .035 hard welding mig wire to clean out this small port.
You will need a flash light to see it.
When you rebuild,, kinda,,, the uploader, don't you have to reset it with a gauged adapter, to make sure it's set properly? Thanks, good video.
when you check the other "check" valves what are you looking for exactly?
+Travis Neuberger , some of the check valves maybe stuck open from debris that can come in from the water supply hose or sometimes the plastic cage on the check valve checks. If you can get the check valve out without it cracking you can see if it is closed correctly and if not you may be able to clean it. Always put a little grease on the oring when you install it back in. Hope this helps, sorry for the late delay, I was on vacation.
Cheers Chris
I am have problems. My 3200 Roby will not pressure down when you let go of trigger. Runs fast all the time
I thought it was replaced under warranty ? You put the same one on with lube ?
Z
Kings Park baby!!! I lived there for 25 years!
Hi, enjoyed your video! Can you tell me the size of the hex wrench key used to remove the 3 hex screws near the unloader? Is it 9mm or 3/8”? Thanks!
10 mm is almost the same as 3/8 .
Hey man..
I have a 4400 psi Simpson pressure washer (it’s the predator 420 cc motor & EZ 4040 pump )
My machine seems like it needs to push out 1,000-1,500 more psi
Do you have any advice/recommendations for fixing this?
I have a pressure washer with honda motor, I didn't use it very often but last time I did, soonest I release the trigger on the gun the motor just shot off... So what I have to do it's just keep pushing the trigger all the time... Any idea what I can do?
Thanks
Raudel
Do you work on Landa pressure washers?
I'm have problem with my honda gx390 pressure washer have no pressure .
Whats the name of that part I accidentally broke half of it off
hi I have a karcher pressure washer HD7 11-4M all running well but hose and pressure gage flicking when I trigger the gun and pulsing.any Idea?
many thanks
Tengo una maquina dewalt de 4000 psi y la bomba AAA 53brd35 tiro el aceite con agua por la parte del nivel de aceite Que puede ser el problema ?
When I pull the trigger there is pressure but if I keep the trigger pulled the pressure dies. Is this also an unloader problem?
did you figure it out -same problem.....
I have a problem with my washer... It's vibrating a lot and the pressure has reduced by half.. What could be the problem
?
one of your check valves is stuck open or cracked
what does it mean when it is pulsating
+Dlbachman88 When it pulsates one of the check valves is either damaged or stuck open by debris that got into the pump. Most times the pump check valves need to be replaced or cleaned.
Does anyone know the size of the metal ball that he describes at 2:28 min. into the video?
I will try and find out for you.
I rebuild mine and now it wont pick up the soap or solution
I have a dewalt witch the valve seems fine but no pressure still, what else can be the reason?
+Mr E (channel) It can be two check valves or more, you need to open the caps and check them if you can get them out.
I removed the Allen caps on the water pressure area and I can see there white plastic thing but they are stick in there, they suppose come out easy?thewarrantycenter
+Mr E (channel) they don't come out easy sometimes, to get them out we sometimes use a pick or special oring pliers we made up to grab them out.
+thewarrantycenter ok thanks
I have similar pressure pump that I purchased new from Lowe’s in 1997 and the salesman told me to always flush pump,after each use,with pink RV antifreeze until it runs through pump and nothing but air with a couple of drops of antifreeze comes out.The antifreeze lubricates and preserves all of internal gaskets and O-rings ect.Also drain carburetor gas bowl and drain fuel from tank and by doing this after every use I’ve never had any issue with freezing problems or pump problems or starting problems.And don’t forget to change pump oil every year.
My powerwasher is working with pressure one minute and none the next. Anyone any ideas what the problem is?
Wow
Alguien me puede decir cómo puedo reparar mi pressure washer, tiene unas 40 horas de trabajo , es motor Honda de 4000 psi trabaja muy bien pero no succiona el jabón o el químico, que debo hacer?
Si tiene injector necesitas cambiarlo se descomponen pronto
Thanks. Very helpful! and remember, Jesus Loves you!!
Why you not replaced that piece you know later you had the same problem.
you're the second dude that said this,,...IT'S NOT MY fuckin problem......gonna keep looking for an answer....damn DeWalt
i have a pressure washer that you got to have the sprayer handle pressed all the time it build up so much pressure it boggs the motor down and its a 6hp.what causes that.
The unloader is stuck or clogged and the pressure will not release.
i checked the loader it work free
I have the same issue with a 3400 psi 2.5 gpm and have only used it 2 times thought simpson pressure washer were good . I am lost. Going to replace the hole pump.
Pamp paresr hed price of
Answer your phone lol
looks like a Subaru Ex21 Engine
Homdapresherwasher
🎉Honda/pump rebuilt pusher washer
3:24 ❤