So as an Aztron Titan owner for about half a year now, and in the last 2 months using it approx 2 times a week here is my words: 1. This thing is just huge hehe, I weight 90/92 kgs and this thing is really stable and very rigid to my own feel. 2. Due to its size and thickness don't expect quick turns and as was said in the video it does lack more pad to the rear (oh the amount of times I tried learning how to turn using the rear as a pivot and my leg just slided off and I felt the water in my face) 3. Again as for stiffness, I feel the dual chamber and the extra pvc of the square of it (which is exactly where your feet are being put) just make the board feel very solid. the only time I get to feel any flex is during a set of bumps close to each other. 4. As to durability and the life of the sup, last week I did find a tiny tiny leak around the pvc of the inner valve (not from the valve itself which was tightend). so I would guess as the eye can also see that the glue came loose. now I wouldn't hurry to judge Aztron for that because in my offense I do tend to leave the sup in the bag at the trunk of my car sometimes for days (small apartment and neglecting owner hehehe) so it could be the heat that causes it. anyway I will try to add some glue around there or extra pvc piece and update on the results.
Hi Eran, thanks for taking the time to add your feedback about your board. It is really great for us to hear and for others to read your experiences so far. Keep an eye on your leak and if it get worst or you cant fix it easy please do contact the shop you got it from. Leaving it in your car or not really looking after it shouldn't really make a difference to the air tightness of the board. Happy paddling Reuben
I am 107Kg. And im not sure if I should get mercury or titan. Hoping to lose weight. But I don’t think it’s going to happen any sooner. Im absolutely begginer. Thanks
Hi Andrés, thanks for the question. As a beginner, the Titan would be your best choice. The Mercury has a recommend rider weight of 95kg, so unless you have paddled before, it will feel slightly unstable. Once you get some experience under your belt, you can then think of upgrading to a smaller board. Hope this helps. Thanks, Beau
I was a distributor for these in Australia. After 15 board blew open because of this double chamber design. I went to make a warranty claim with Tony the owner. He refused each claim and said he'll warrant 5 boards in my next container order. I wasnt going to order anther container because these board failed so much. They are the same company as Aqua Marina. They screwed all those customers and Tony just started a new brand. Typical chinese manufacture
Thanks for your feedback. It's very important for us to get feedback good and bad about the industry. Out of interest what year of boards were these? I will chat to the SUPboarder team about your comment and make them aware of it. Thanks again.
Hey Jeff. Beau is doing a great job with the videos and reviews. But he hasn't been doing it as long as me 😉 , but together we can get more reviews done. Thanks Reuben
bit concerned after watching a video of a russian? importer that claimed a 25% failrate(claim backed up by a danish importer, euroskateshop), no way to return/refund the product with the with the manufacturer? ruclips.net/video/wGmBNqSRBn0/видео.html is this still an issue or has the quality increased dramatically?
Hey Martin. Thanks for sharing the video with us. There's no doubt that the overall finish of the Aztron Boards is not as high as boards twice the price. But in general the boards we have had have all worked and been fine over the review period we have had them ( about a month). I have heard of boards being warranted from Aztron for our readers but they have all been sorted out in most countries. I would say that the finish is ok for price. But obviously a board with holes and major defects is not acceptable. So if you buy a board, unpack it and give it a good look over and any problems get back to the shop then they should replace it and sort it. Aztron should be replacing boards with warranty problems if anybody has not had a board replaced please get in contact with us! I hope that helps? Thanks Reuben
You can tighten the screws on the paddle and it won't move or twist 👍
So as an Aztron Titan owner for about half a year now, and in the last 2 months using it approx 2 times a week here is my words:
1. This thing is just huge hehe, I weight 90/92 kgs and this thing is really stable and very rigid to my own feel.
2. Due to its size and thickness don't expect quick turns and as was said in the video it does lack more pad to the rear (oh the amount of times I tried learning how to turn using the rear as a pivot and my leg just slided off and I felt the water in my face)
3. Again as for stiffness, I feel the dual chamber and the extra pvc of the square of it (which is exactly where your feet are being put) just make the board feel very solid. the only time I get to feel any flex is during a set of bumps close to each other.
4. As to durability and the life of the sup, last week I did find a tiny tiny leak around the pvc of the inner valve (not from the valve itself which was tightend). so I would guess as the eye can also see that the glue came loose.
now I wouldn't hurry to judge Aztron for that because in my offense I do tend to leave the sup in the bag at the trunk of my car sometimes for days (small apartment and neglecting owner hehehe) so it could be the heat that causes it. anyway I will try to add some glue around there or extra pvc piece and update on the results.
Hi Eran, thanks for taking the time to add your feedback about your board. It is really great for us to hear and for others to read your experiences so far.
Keep an eye on your leak and if it get worst or you cant fix it easy please do contact the shop you got it from. Leaving it in your car or not really looking after it shouldn't really make a difference to the air tightness of the board. Happy paddling Reuben
The uneven outline due to double-chamber can be bothering. It can be turned off point. Aztron should solve that problem before releasing to market.
I am 107Kg. And im not sure if I should get mercury or titan. Hoping to lose weight. But I don’t think it’s going to happen any sooner. Im absolutely begginer. Thanks
Hi Andrés, thanks for the question. As a beginner, the Titan would be your best choice. The Mercury has a recommend rider weight of 95kg, so unless you have paddled before, it will feel slightly unstable. Once you get some experience under your belt, you can then think of upgrading to a smaller board. Hope this helps. Thanks, Beau
I was a distributor for these in Australia. After 15 board blew open because of this double chamber design. I went to make a warranty claim with Tony the owner. He refused each claim and said he'll warrant 5 boards in my next container order. I wasnt going to order anther container because these board failed so much. They are the same company as Aqua Marina. They screwed all those customers and Tony just started a new brand. Typical chinese manufacture
Thanks for your feedback. It's very important for us to get feedback good and bad about the industry.
Out of interest what year of boards were these?
I will chat to the SUPboarder team about your comment and make them aware of it. Thanks again.
Where can you buy this brand? I’m in the US and can’t seem to find anything online
Hi Huy have you try sending them a Facebook message ? facebook.com/AztronGlobal/
How come the Aztron Nova series are not in this video?
Because that series had an entire video just for them probably.
You are right Eran .. Here it is Hristo ruclips.net/video/TDWj35FGfC0/видео.html . Thanks Reuben
Video needed Ruben.
Hey Jeff. Beau is doing a great job with the videos and reviews. But he hasn't been doing it as long as me 😉 , but together we can get more reviews done. Thanks Reuben
bit concerned after watching a video of a russian? importer that claimed a 25% failrate(claim backed up by a danish importer, euroskateshop), no way to return/refund the product with the with the manufacturer?
ruclips.net/video/wGmBNqSRBn0/видео.html
is this still an issue or has the quality increased dramatically?
Hey Martin. Thanks for sharing the video with us. There's no doubt that the overall finish of the Aztron Boards is not as high as boards twice the price. But in general the boards we have had have all worked and been fine over the review period we have had them ( about a month). I have heard of boards being warranted from Aztron for our readers but they have all been sorted out in most countries.
I would say that the finish is ok for price. But obviously a board with holes and major defects is not acceptable. So if you buy a board, unpack it and give it a good look over and any problems get back to the shop then they should replace it and sort it.
Aztron should be replacing boards with warranty problems if anybody has not had a board replaced please get in contact with us!
I hope that helps? Thanks Reuben