Vent-Axia Sentinel Kinetic Plus B - MVHR Unit
HTML-код
- Опубликовано: 22 авг 2024
- Vent Axia Lo-Carbon Sentinel Kinetic Plus B heat recovery unit is the UKs top selling heat recovery unit. This unit is top-quality and has many options for control, proven durability and guaranteed performance
The Lo-Carbon Sentinel Kinetic Plus B is suitable for house sizes up to 260m2, it meets requirements for whole house system ventilation - Building Regulations ADF and ADL
This unit comes with an optional complete ducting system of Quiet-Vent semi rigid radial ducting, it will provide a professional and quiet system that complies with all building control requirements
Please note - You can purchase the heat recovery unit with or without the ductwork on this listing
This heat recovery unit and Standard semi rigid radial ducting kit meets the highest and latest Building Regulation requirements and are suitable for newly constructed homes and renovation projects
Please call our sales team on 028 2827 5150 / +353 1526 7452 if you would like more information about upgrading your kit
KEY FEATURES:
Vent Axia Plus B Heat recovery unit
91% heat recovery
Suitable for house sizes up to 260 m2
Extra low energy use
Left or right-hand configuration
Mechanical summer by-pass
Internal humidity sensor
Digital control
Vertical or horizontal connections
5 Year warranty
Dimensions (W x H x D): 785mm x 635mm x 550mm
Filtration
Vent Axia Plus B Heat recovery unit requires 2 x G4 filters and the option of a F7 pollen intake filter
Controllability
The Lo-Carbon Sentinel Kinetic Plus B has 3 fully adjustable speeds and a purge setting (maximum flow). The unit comes supplied with a digital controller, it can be used to pre-set the units speed to any airflow that is required within the performance range of the unit
The units boost mode can be achieved with almost any type of sensor or switch, including a momentary switch
Integral Humidity Sensor
The integral humidity sensor increases speed in proportion to relative humidity levels, this saves energy and reduces noise. The sensor even reacts to small but rapid changes in humidity, meaning that it picks up humidity changes even if the normal trigger threshold is not reached. This ensures that your home is adequately ventilated, including even the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature
Construction
The inner body of the unit is constructed of EPP, and the outer enclosure is constructed of PVC
Motors
The unit features 2 x low energy, highly efficient EC/DC motors
Installation
Spigot Options- The combination of spigot options allow the unit to be installed in confined locations. If vertical and horizontal connections are required on the same outlet/inlet, additional spigots can be supplied.
The condensate drain can be taken out through the side, back or the bottom of the unit. The final condensate connection is made using the fittings supplied, it can be completed after installation and is made outside the unit
ACCESSORIES:
A full range of compatible ducting is available to complete the installation, also available is a full range of sensors, controllers, in-line silencers, floor/wall/ceiling inlet and outlet diffusers.