Most of my computer building skills have come from your channel. Working on a Hyte y70 infinite with the hydroshift 360 tl AIO is possible mostly because of your videos. 🤙
Dear Prawn, thanks a lot. I think the cable management of the AIO is great, but I don't like the large Lian Li branding on the side of the radiator. Great video as always.
@@TheProvokedPrawn i just got this cooler. but i have some problems it worked first time starting up but then the next day the cpu just Gets hot and turns off. It worked great the first time really don't know what the problem is.
Thanks for this video - ecellent timing. I was literally installing this aio last night when this video dropped, alas, not a member, so can only watch now. I found the same thing with the third bracket. In fact, with a push-pull rad config, using the third bracket meant that I could not get the aio tubes to bend properly because there was not enough slack in the tubes. I had to reinstall the L Connect 3 software so it woould detect the Hydroshift. One very annoying thing that didnt happen in previous versions of L Connect is that when I select a Port of fans and select one of the stock curves or set a custom curve, when I click Apply All the software applies the curve to all fans BUT it also sets the fans to the same size. I have a mix of 140s and 120s. So, if I set the curve on a set of 120s and click Apply All, the software will apply the surve but also set my 140s to 120. Very annoying.
@@TheProvokedPrawn What did you do with the third cable (3-pin) coming off the big connection cable from the pump? There's the SATA, the USB, and that third 3-pin connector. I connected it to the motherboard, but I dont think it is doing anything.
Man I just reordered a Lian Li lcd because the first one was borked lol. I am glad I saw this vid because on my new build that I am working on, chatted with you on another vid about it, you are using the exact same motherboard for amd that I am. It confirmed that I had my setup correct with my other AIO. So glad you did this!! If my new one comes tomorrow and it still doesnt work ill get this AIO.
Hey! Maybe you can help me since i didnt get a reply to my last comment. I got one of these and for some reason seems like the cooler wasnt cooling. My question is, do i have to go on BIOS and change something on CPU Fan Settings? Pls help me, i really want this AIO and i already returned 2 because i dont know whats wrong and why it goes from 0 to 90 degrees in 30 seconds. All is mounted correctly.
@@brut3 maybe you guys can help, Question maybe somebody has insight as I’m new and just built my first pc. I have the same aio lian li hydro shift rgb version tho so my fans completely light up. And when I turn on my pc, the fans start and the rgb flickers for half a second then turns off then about 5-6 seconds later everything turns on fine. I noticed he also has a delay for the screen like I do but the flicker is just confusing me.
It comes with an optional 3rd tube bracket to keep the tubes tight against the rad for a couple more inches, I recommend using it so the tubes stay hidden until just before coming out above the pump, it makes it look so clean. I have a set of strimer cables meant for the gpu that I removed from the default cables and attached to the cpu cables from my psu and routed them over the top of the tubes making them completely unseen.
@vlydenknox very minor, probably less then a normal setup would. the tubes run along the rear of the radiator, and the modded cables are at a right angle to the fans. They are split, and only one comes close to the fans for about an inch before moving away.
damn Age...my 2025 PC build has just shot up in price...between this AIO and those fans and those nice Lian wireless RGB cables you showed in your latest video its gonna cost me a fortune.
I tested the hydroshift and the Galahad on the 13900k. I could not notice any temperature differences and same score on benches. I returned the Galahad, it has a lot more wiring and requires 3 USB slots instead of one. It needs two Sata ports instead of one also. It has a little extra rgb on the aio but other than that the hydroshift is a sleeker design. I like the hydroshift fans better personally.
I just bought the Galahad II LCD AIO a month ago, just before this Hydroshift came out. Now I want the Hydroshift and I already have the TL and TL LCD fans. Wish I could buy this AIO without the fans. Guess I'm going to have to just bite the bullet because I want this AIO. Should go nicely with my Lian Li O11 EVO RGB white case.
@debatebore1057 I thought about that too. But I'm using AMD 7800X3D, so I wouldn't want to take a chance with a thinner rad. Them AMDs run pretty warm.
@@O-Friendly I just swapped from an Arctic LFII to the Hydroshift 360S. Literally no change in temps in both gaming and non-gaming use. Just my experience after one day of use.
If anyone is upgrading their AIO in a Lian Li 011 EVO case and you have an Intel LGA1700 socket. The metal bracket will not fit without removing the mobo or do what i did. I ground off about a 1/16 of an inch off the left side of the metal bracket with a grinding wheel. (I had to run to my work mid install) and you a will need to trim 2 of the black plastic washers with a razor blade as well. He doesn't show him putting the black washers over the posts before installing to the back of the mobo. Just besure to read the instructions before and after you reference the video. Great video btw. It definitely help my decision to ugrade to the Hydroshift. I was wondering if you could answer why cpu fan header is better than the pump fan header? And did you freshly install L3 connect software or upgrade? I use all infinity fans like your video and i had to reinstall the L3 connect vesion for the fans 1st than the version for the Hydroshift LCD. Otherwise it didnt see my inf fans in the L3 software menu.
Found your channel when I was looking for guide for the Dynamic Evo XL case, subbed ever since. I'm going with a Lian Li AIO, I love the way their fans connect. Which do you prefer, this Hydroshift or the GALAHAD II LCD for a gaming set up? Also, with the Hydro having the tubes on the side of the rad, any issues with it in a Evo XL or Evo RGB case? Im assuming no with so much room in them, but just want to make sure. Thx again for all these guides.
@@TheProvokedPrawn Oh ok pefect. I didn't mean side mounted, just how the tubes on the Hydro come from the side of the Rad so I seen some say to make sure you got some extra clearance for it but Im sure the Evo XL or RGB have plenty of room for it. On your Lian Dynamic XL or RGB, do you prefer your aio on top or on the side panel? Seems like in the build guides you normally put it on the side. Thx for the quick response.
@@TheProvokedPrawn thank you so much! Although i have the Unifan inf, not the SL, too complicated with the names 🤣. I just ordered the AIO, will use your vid to install them. If you ever find yourself in the Netherlands, i will buy you a beer or two 🙂
Dear Prawn. Thanks for always providing great content. Is it possible to mount the AIO on the side and move the fans to the other side of the radiator (back) position? I’m wondering if the fan power cables might be too short to make this adjustment.
@ I’m just wondering about the length of the power cables to fan. I want to replace the MasterLiquid 360 ION with the HydroShift 360R mainly because I have a set of 3x Uni Fan, and I want to control everything through one app - L-Connect - instead of two. I just hope that the HydroShift will be as efficient and quiet as the ION from Cooler Master.
@THEPROVOKEDPRAWN I've just bought the newer hydroshift 360n fanless. I wanted the the hydroshift tl but out of stock everywhere. So bought a separate 3 pack of tls. My concern is the aio pump only has a pwn cable for motherboard and a usb cable coming from it. Will it be safe to fit the tls and set them up as cpu in l connect. Never set up an aio this way always used kraken elites with breakout cable for fans
Does the screen on the heatsink and the lights on the fans not work if you don't have a controller? I'm using a stock Lian Li Hydroshift LCD 360R. No changed fans or anything. I connected everything to my ROG STRIX Z790-A and my EVGA 850W P5 (everything's new, bought together).
I'm going to buy this but I want to mount it in the side part of the Lian Li Evo Dynamic case. That sort of back panel. I'm assuming it will work just fine. I have my corsair cooler in that spot now. It should work just fine right? There's no reason it can't be mounted there?
Hey man i’ve had this same cooler for a while now but I’m pretty sure they are intaking air and not exhausting. I never changed the fans and they were pre installed so not sure if i’m wrong or you lol
Hey Prawn! could you use the UNI SL120 INF ARGB fans with this AIO as I have 6 of those in reverse and would like to get this and 3 of those fans in standard orientation to match, if so would you need 2 different controllers or just the one?
So out of all the videos I've watched they always said never have the tubes on the top, so is there some kind of new technology Where air doesn't travel to the top of the AIO causing an air pocket?
@@GDBAKED81 if it's in the radiator it doesn't matter. If it's in the pump it would be a problem and in most cases the pump is in the CPU block. So it won't get sucked into there.
Hey Prawn 🦐 Did you happen to note what the performance difference was when you swapped the fans? I was thinking of putting my infinity fans on there to match the rest of my lian li fans. But Im a little concerned on how much cooling I'll lose
Hi! Thanks for the great content :) I just bought the Vision Compact case and am planning to pair it with the Hydroshift TL cooler. My idea is to replace the three fans that come with the cooler with three reverse fans (With LCD screens). Would this affect the cooling performance of the CPU? I already have five other fans in the case bringing in air. Also is it possible to flip the three fans that came with the cooler so that they pull air in instead of pushing it out? As a row at the bottom of the case? That way, I can use the fans that came with the cooler, and they won’t go to waste :P
Sorry, I want a total of 6 fans pulling air in (3 through the CPU cooler and 3 at the bottom of the case), while the two fans at the back of the case will push air out. Do you think this will work well? :) (Sorry for the slightly odd questions, but I’m pretty new to PC building).
Hey love the video , just bought the same aio cooler but for some reason my pump is turning on a bit late after starting my pc sometime it won’t turn on right away and just randomly out of no where start to pump and temps go down ! 😢 what could be the biggest issue here ! Can seem to figure it out love this product and just trying to figure something out ! Like I’ll play and temps would be amazing but once I turn it off and turn it back on my pump for this aio cooler take a bit to kick in 😢
Hi.✌️ Can you (or someone else) please tell me whether you can control the RGB zones of these fans separately in L-Connect? So that you e.g. can only illuminate the two strips on the edge of the fans but can deactivate the inner fan blades? Just like the Uni fans SL Infinty? 👀🙏🙏🙏🙏
If you look online you'll see people complaining about all sorts of software from different brands. In my experience people are quick to complain, slow to compliment. In my experience L Connect is perfectly fine. Not perfect but good. Basically the same can be said for lots of other software too 😂
@@TheProvokedPrawn you are absolutely right with that complaining 😂 I never used a Lian Li product, so I was curious about your experience. Thank you for your work 🫶🏻 lovely greetings from Germany
Thanks for an informative video. A while ago you had a MSI MEG MAESTRO 700L PZ in a video where you did a project zero build, would this Lian Li Hydroshift LCD 360R AIO fit in that case, in terms of the length of tubes going down to the cpu?
@@kennethz3366 it wasn't meant as a review as I didn't test it like that and it would have been unfair to do so since I swapped the fans for SL120 fans. However I did show some benchmark results at the end of this video ruclips.net/video/nbHj9sIZbVU/видео.html
@ i don’t mean the radiator. I’m talking about rotating the pump head 90 degrees so you dont have to bend the hoses so much. The lcd will be sideways but that’d be an easy fix in l-connect.
I run a Galahad 360 with a push pull fan config and was looking to upgrade to a new AIO does this one support a Push Pull setup or would you recommend one. My pc gets really hot because I use a 7800x 3d and a 4090
Yes, the Hydroshift supports push-pull configurations. I installed a Hydroshift 360S last night and I swapped the stock fans for 6 UNI INF 120s. Im also running a 7800X3D and a 4090. Previous 360 aio was an Arctic LFII 360. Temps are identical. I shifted from a Lian Li Lancool 2 Mesh to a Lian Li O11 Evo RGB. Top-mounted the rad and while a tight fit, the push-pull 360 setup barely fits (ven witht he mobo in the lowest position).
I use pump header just because there must be a reason for seperate pump headers, like optimized speed changes to account for fluid instead of air, otherwise why have them.
Might sounds like a noob question but, why is the software showing 4 fans for the cpu cooler while there's actually only 3 fan mounted on the radiator? What am i missing? 🤔
It's just the software default showing the max amount of fans supported per channel on the hub, you can select how many are actually installed on each individual channel and it will gray out the extras in hardware setup and adjust the lighting effects to the physicaly installed fans but always shows the maximum available per channel on the lighting setup screen for some odd reason.
@o0Silverwolf0o awesome, thanks alot for the answer I got all the parts for my new setup waiting in the closet and waiting on my gpu and cpu to be shipped.. Glad that there's no real issue with the software 😃
on the Lian Li website its say "It is not recommended to plug the 12V PWM Pump cable into the CPU OPT port. Please connect it to a CPU FAN or AIO PUMP header instead and set the port in BIOS to PWM mode." i would like to know the difference because i'm relatively new to PC builds is the correct way to install it on the motherboard the one you showed in the video? or should i follow the website instructions ?
@@Punished_Luna i was getting pump failure on cold boot if i plugged it in cpu fan for a few seconds, like the pump takes sometimes to turn on 😅 but resolved in pump fan strange.
i have just built my new pc with the same ryzen board and tl hydroshift but thought I had to use the pump header not the fan header like you said. Should I move the connection from pump to fan header on motherboard? I have not tried to boot yet as missing something to complete the build
@ sorry I’ll clarify. So on step one essentially of the amd installation where you remove the original standoff screws. I do not have those or the standoffs, probably misplaced. Can I use the screws that came in the hydroshift box? There’s 12 of them
@ can’t really tell based on the threading, but the top of the lian li ones are flat Phillips and the ones in your video from the AM5 board appear to be round Phillips. Moving houses really doesn’t help with keeping PC part boxes
I was planning on swapping the fans on this aio and reusing them as exhaust on an upright mounted gpu, are the connectors that the fans on the R model use generic or can they plug straight into the connector hub?
Edit: Figured it out. Yes, I neglected the cpu header. Plugging it in fixed everything. I did the fan swap on my hydroshift. Fans are connected to controller, aio's usb is plugged in, but the pumps aren't working. Got the fans at full speed for now, but I can't figure out why the pump won't go. Do I perhaps need that cpu fan header connected?
I know it's a stupid question but i need to ask because i would love to have this aio. Is this compatible with LGA 1200 does it have a mount or something for LGA 1200?
hey i watched all your videos about the lian li stuff.. i bought myself the infinity fans (reverse and normal) i bought the aio too and now i have a shineing rgb monster and i want it to shine even in sleep mode but every time it goes to sleep mode the rgbs turn off and i cant fix it.. i saw some guy changing anything in the windows entry for sleep mode.. but i dont know what and how.. and dont find the video again... i already tried bios but it doesnt work too...
Hi Prawn, Have you heard anything about the release date of the 2024 Lian Li cases? I'm mainly interested in the Lancool 207. Just wondering if you heard anything. Thanks Update: late Q3 for both lancool 207 and 217 according to Lian Li support.
hey I have question about your motherboard Asrock LiveMixer. since it has that epd port then can we use any screen on it? I have that good quality 1080p touch screen(40pin) from my old dell laptop but I'm not sure if that motherboard will even detect it or may ended up burn it.
I have the same problem.Have you figured this out yet?I just booted my pc for the first time though,I haven’t even downloaded windows yet but I supposed the lcd should turn on anyway
I’ve been having issue with my hydro shift aio screen reading zero for the cpu. If I restart a few times it sometimes comes back. All other stats show normally. It will work for a few days or sometimes a day. It’s random. I’ve done the c++ updates re installed etc. is this a known issue? to make this longer and more endless 😊
I installed my Hydroshift like the one in the video (4-pin to cpu_fan, argb to 5v argb header, sata to sata) but every time I boot up the computer, I always get an error message saying “CPU Fan Speed detection error”. How to fix this? Should I just bypass it by (change cpu fan speed from monitor to ignore)?
Question maybe somebody has insight as I’m new and just built my first pc. I have the same aio lian li hydro shift rgb version tho so my fans completely light up. And when I turn on my pc, the fans start and the rgb flickers for half a second then turns off then about 5-6 seconds later everything turns on fine. I noticed he also has a delay for the screen like I do but the flicker is just confusing me.
Windows does weird things while all of the background processes are starting up. Nothing to worry about as long as your fans + rgb turn on and are recognized in your Lian Li software!
@TheProvokedPrawn Hey! I bought this model and after installing it following your video the cpu temp goes from 0 to 90 in less than 1 minute. Do i need to change any settings on BIOS for the CPU Fan cable be recognize by the board? Asking because it always was giving me the message of "No CPU Fan" while booting and since it is plugged there seems awkward. Pls help me i really need it. Running a Asus Rog B-550 A with a Ryzen 5 5600X if it helps.
@@TheProvokedPrawn Everything was in place, fans running and also could get them on L-Connect but never got signal from the pump there like in your video. But yeah, temps went from 0 to 90 really fast. Like i told you, was watching the video while mouting it on my system so i think i got it correctly done. Was just asking about something on BIOS because i think you can set the cpu fan to PWM or Volts. My mistake might be there. Didnt you went to your bios and setup the Cpu Fan for PWM?
Where does it say anywhere in the title or anywhere else it's a review? It's a setup guide. Performance details I put in case reviews because the cooling can be influenced by many factors.
Most of my computer building skills have come from your channel. Working on a Hyte y70 infinite with the hydroshift 360 tl AIO is possible mostly because of your videos. 🤙
Sounds great! Thanks
Bro i am sure you have heard this a lot, but you have the voice of a talk show host or RJ. Great voice and great work too. Thanks.
So nice of you
I got the aio after watching this video. Thanks for the video. Using it with my 9800x3d. Woohoo! @@TheProvokedPrawn
Dear Prawn, thanks a lot. I think the cable management of the AIO is great, but I don't like the large Lian Li branding on the side of the radiator. Great video as always.
Thanks for the input. You can remove that plate I think. So you could get rid of that. Not that I've tried
@@TheProvokedPrawn you are correct
@@TheProvokedPrawn i just got this cooler. but i have some problems it worked first time starting up but then the next day the cpu just Gets hot and turns off. It worked great the first time really don't know what the problem is.
@@dasbassdasbass7018did you end up fixing the issue
No.using air cooler at the moment and contacted Lian Li they said their sending a new one and waiting on it
Been waiting for this one!
Thanks for this video - ecellent timing. I was literally installing this aio last night when this video dropped, alas, not a member, so can only watch now. I found the same thing with the third bracket. In fact, with a push-pull rad config, using the third bracket meant that I could not get the aio tubes to bend properly because there was not enough slack in the tubes. I had to reinstall the L Connect 3 software so it woould detect the Hydroshift. One very annoying thing that didnt happen in previous versions of L Connect is that when I select a Port of fans and select one of the stock curves or set a custom curve, when I click Apply All the software applies the curve to all fans BUT it also sets the fans to the same size. I have a mix of 140s and 120s. So, if I set the curve on a set of 120s and click Apply All, the software will apply the surve but also set my 140s to 120. Very annoying.
Thanks for sharing your experience!
@@TheProvokedPrawn What did you do with the third cable (3-pin) coming off the big connection cable from the pump? There's the SATA, the USB, and that third 3-pin connector. I connected it to the motherboard, but I dont think it is doing anything.
Man I just reordered a Lian Li lcd because the first one was borked lol. I am glad I saw this vid because on my new build that I am working on, chatted with you on another vid about it, you are using the exact same motherboard for amd that I am. It confirmed that I had my setup correct with my other AIO. So glad you did this!! If my new one comes tomorrow and it still doesnt work ill get this AIO.
Hey! Maybe you can help me since i didnt get a reply to my last comment. I got one of these and for some reason seems like the cooler wasnt cooling. My question is, do i have to go on BIOS and change something on CPU Fan Settings? Pls help me, i really want this AIO and i already returned 2 because i dont know whats wrong and why it goes from 0 to 90 degrees in 30 seconds. All is mounted correctly.
@@brut3 maybe you guys can help, Question maybe somebody has insight as I’m new and just built my first pc. I have the same aio lian li hydro shift rgb version tho so my fans completely light up. And when I turn on my pc, the fans start and the rgb flickers for half a second then turns off then about 5-6 seconds later everything turns on fine. I noticed he also has a delay for the screen like I do but the flicker is just confusing me.
It comes with an optional 3rd tube bracket to keep the tubes tight against the rad for a couple more inches, I recommend using it so the tubes stay hidden until just before coming out above the pump, it makes it look so clean. I have a set of strimer cables meant for the gpu that I removed from the default cables and attached to the cpu cables from my psu and routed them over the top of the tubes making them completely unseen.
does this not block your fans?
@vlydenknox very minor, probably less then a normal setup would. the tubes run along the rear of the radiator, and the modded cables are at a right angle to the fans. They are split, and only one comes close to the fans for about an inch before moving away.
Just rebuilt my rig with this cooler (The TL Version). Put the TL LCD Fans on it in the o11D Evo RGB Case
@@ShinGoukiSan liking it?
@@TheProvokedPrawn I am loving it so far!
I'm confused the tl version doesn't have a Sata.. it's got some other connector I don't recongize.
Thank you Prawn!!
You are most welcome
Can I ask why you put the pump cable to cpu header instead of cpu pump header?
Usually stops the bios complaining
@@TheProvokedPrawn just go into bios and ignore the cpu fan error warning.
damn Age...my 2025 PC build has just shot up in price...between this AIO and those fans and those nice Lian wireless RGB cables you showed in your latest video its gonna cost me a fortune.
Hey Airblazer. Sorry about that 🤣
I tested the hydroshift and the Galahad on the 13900k. I could not notice any temperature differences and same score on benches. I returned the Galahad, it has a lot more wiring and requires 3 USB slots instead of one. It needs two Sata ports instead of one also. It has a little extra rgb on the aio but other than that the hydroshift is a sleeker design. I like the hydroshift fans better personally.
I just bought the Galahad II LCD AIO a month ago, just before this Hydroshift came out. Now I want the Hydroshift and I already have the TL and TL LCD fans. Wish I could buy this AIO without the fans. Guess I'm going to have to just bite the bullet because I want this AIO. Should go nicely with my Lian Li O11 EVO RGB white case.
Get the R model and swap your fans for the standard ones like I did 👍🏼
@@TheProvokedPrawn that's exactly what I was thinking of doing.
If you can tolerate a slightly thinner rad, get the cheaper "S" version and swap the fans.
@debatebore1057 I thought about that too. But I'm using AMD 7800X3D, so I wouldn't want to take a chance with a thinner rad. Them AMDs run pretty warm.
@@O-Friendly I just swapped from an Arctic LFII to the Hydroshift 360S. Literally no change in temps in both gaming and non-gaming use. Just my experience after one day of use.
If anyone is upgrading their AIO in a Lian Li 011 EVO case and you have an Intel LGA1700 socket. The metal bracket will not fit without removing the mobo or do what i did. I ground off about a 1/16 of an inch off the left side of the metal bracket with a grinding wheel. (I had to run to my work mid install) and you a will need to trim 2 of the black plastic washers with a razor blade as well. He doesn't show him putting the black washers over the posts before installing to the back of the mobo. Just besure to read the instructions before and after you reference the video.
Great video btw. It definitely help my decision to ugrade to the Hydroshift. I was wondering if you could answer why cpu fan header is better than the pump fan header? And did you freshly install L3 connect software or upgrade? I use all infinity fans like your video and i had to reinstall the L3 connect vesion for the fans 1st than the version for the Hydroshift LCD. Otherwise it didnt see my inf fans in the L3 software menu.
Is it a must to have the tubes on top? I'm using a reverse case build. Thank you
U can put one thermalrigth frame for am5 with this aio?
Found your channel when I was looking for guide for the Dynamic Evo XL case, subbed ever since. I'm going with a Lian Li AIO, I love the way their fans connect. Which do you prefer, this Hydroshift or the GALAHAD II LCD for a gaming set up? Also, with the Hydro having the tubes on the side of the rad, any issues with it in a Evo XL or Evo RGB case? Im assuming no with so much room in them, but just want to make sure. Thx again for all these guides.
I prefer the hydropshift but I have not tried it side mounted.
@@TheProvokedPrawn Oh ok pefect. I didn't mean side mounted, just how the tubes on the Hydro come from the side of the Rad so I seen some say to make sure you got some extra clearance for it but Im sure the Evo XL or RGB have plenty of room for it.
On your Lian Dynamic XL or RGB, do you prefer your aio on top or on the side panel? Seems like in the build guides you normally put it on the side. Thx for the quick response.
Honestly I really want lian li to make a 240 version of this cause it looks great
Pump looks good wish it would work in my 011 vision case as a side mount
It does, on the instructions manual It explains how the tube's can switch sides and also the side panels.
Life saver again! Thank you for this. Just one question please, will the method you shpwed work if i use SL Inf fans and not V2?
@@madavgis7 yes
@@TheProvokedPrawn thank you so much! Although i have the Unifan inf, not the SL, too complicated with the names 🤣. I just ordered the AIO, will use your vid to install them. If you ever find yourself in the Netherlands, i will buy you a beer or two 🙂
you got a tutorial for a push/pull of the stock fans with adding case fans that match?
Thank you my friend.
Isn't it easier to use a split cable that comes in the package with a single fan than this flat one?
Dear Prawn. Thanks for always providing great content.
Is it possible to mount the AIO on the side and move the fans to the other side of the radiator (back) position?
I’m wondering if the fan power cables might be too short to make this adjustment.
Hmm I've not tried that so I'd just be making assumptions but I don't see why not
@ I’m just wondering about the length of the power cables to fan.
I want to replace the MasterLiquid 360 ION with the HydroShift 360R mainly because I have a set of 3x Uni Fan, and I want to control everything through one app - L-Connect - instead of two.
I just hope that the HydroShift will be as efficient and quiet as the ION from Cooler Master.
Does anyone know what fans come with the 360R version? I'm trying to order the same fans to match the rest of my build.
@THEPROVOKEDPRAWN I've just bought the newer hydroshift 360n fanless. I wanted the the hydroshift tl but out of stock everywhere. So bought a separate 3 pack of tls. My concern is the aio pump only has a pwn cable for motherboard and a usb cable coming from it. Will it be safe to fit the tls and set them up as cpu in l connect. Never set up an aio this way always used kraken elites with breakout cable for fans
How’s the pump noise ??? Galahad II sucks
Does the screen on the heatsink and the lights on the fans not work if you don't have a controller?
I'm using a stock Lian Li Hydroshift LCD 360R. No changed fans or anything. I connected everything to my ROG STRIX Z790-A and my EVGA 850W P5 (everything's new, bought together).
I'm going to buy this but I want to mount it in the side part of the Lian Li Evo Dynamic case. That sort of back panel. I'm assuming it will work just fine. I have my corsair cooler in that spot now.
It should work just fine right? There's no reason it can't be mounted there?
Nice-looking display, is this available in a 420 rad?
Only 360 at the moment I believe
Hey man i’ve had this same cooler for a while now but I’m pretty sure they are intaking air and not exhausting. I never changed the fans and they were pre installed so not sure if i’m wrong or you lol
Hey Prawn! could you use the UNI SL120 INF ARGB fans with this AIO as I have 6 of those in reverse and would like to get this and 3 of those fans in standard orientation to match, if so would you need 2 different controllers or just the one?
So out of all the videos I've watched they always said never have the tubes on the top, so is there some kind of new technology Where air doesn't travel to the top of the AIO causing an air pocket?
@@GDBAKED81 like a lot of other people you entirely misunderstood that video
ruclips.net/video/qQcyYHGtArs/видео.html
@TheProvokedPrawn It wasn't just one video a lot of videos don't recommend the hoses at the top 🤷🏾
@@GDBAKED81 again misunderstood. It's got nothing to do with hoses at the top. It's about the pump not being the highest point.
@TheProvokedPrawn okay so air doesn't accumulate at the top of the AIO?
@@GDBAKED81 if it's in the radiator it doesn't matter. If it's in the pump it would be a problem and in most cases the pump is in the CPU block. So it won't get sucked into there.
Hey Prawn 🦐
Did you happen to note what the performance difference was when you swapped the fans? I was thinking of putting my infinity fans on there to match the rest of my lian li fans. But Im a little concerned on how much cooling I'll lose
I haven't tested that yet I'm afraid.
Hi! Thanks for the great content :)
I just bought the Vision Compact case and am planning to pair it with the Hydroshift TL cooler. My idea is to replace the three fans that come with the cooler with three reverse fans (With LCD screens). Would this affect the cooling performance of the CPU? I already have five other fans in the case bringing in air.
Also is it possible to flip the three fans that came with the cooler so that they pull air in instead of pushing it out? As a row at the bottom of the case? That way, I can use the fans that came with the cooler, and they won’t go to waste :P
Sorry, I want a total of 6 fans pulling air in (3 through the CPU cooler and 3 at the bottom of the case), while the two fans at the back of the case will push air out. Do you think this will work well? :) (Sorry for the slightly odd questions, but I’m pretty new to PC building).
How does it look on a inverted build with the O11 EVO? Easy to mount and does the build looks clean ?
Hey love the video , just bought the same aio cooler but for some reason my pump is turning on a bit late after starting my pc sometime it won’t turn on right away and just randomly out of no where start to pump and temps go down ! 😢 what could be the biggest issue here ! Can seem to figure it out love this product and just trying to figure something out ! Like I’ll play and temps would be amazing but once I turn it off and turn it back on my pump for this aio cooler take a bit to kick in 😢
broter which is best lian li gallahad 2 lcd or hydroshift
which i choose
Can you sync the stock Hydroshift fans with the rest of the SL fans in the case? and if yes how? I don't see them on L-Connect 3
Great AIO, may have to snag one when they become available. I'll always be a front/side mounter, though. Is it really "top mount only"?
No, they say you can side mount it, but the tubes won't look as good. I've not tried though
I don't think the tubes would reach unless you remove the brackets and shroud and at that point it's just a galahad 2.
@TheProvokedPrawn cheers! Lol. Finally going to give it a whirl! 🤞
@@TheProvokedPrawnIndeed, the tubes do not look as neat and tidy. But they'll be building snowforts in hades before I top mount a radiator.
@SpaceyMonkey75 😂
Hi.✌️
Can you (or someone else) please tell me whether you can control the RGB zones of these fans separately in L-Connect?
So that you e.g. can only illuminate the two strips on the edge of the fans but can deactivate the inner fan blades? Just like the Uni fans SL Infinty?
👀🙏🙏🙏🙏
Beautiful work, man! What do you think about the quality of their software? I’ve heard (some months ago), that the software has many issues.
If you look online you'll see people complaining about all sorts of software from different brands. In my experience people are quick to complain, slow to compliment. In my experience L Connect is perfectly fine. Not perfect but good. Basically the same can be said for lots of other software too 😂
@@TheProvokedPrawn you are absolutely right with that complaining 😂 I never used a Lian Li product, so I was curious about your experience. Thank you for your work 🫶🏻 lovely greetings from Germany
I have the TL which does not have the SATA, I can see Fan/Pump, but it just says no fan products detected - does not look like yours
Thanks for an informative video. A while ago you had a MSI MEG MAESTRO 700L PZ in a video where you did a project zero build, would this Lian Li Hydroshift LCD 360R AIO fit in that case, in terms of the length of tubes going down to the cpu?
I believe it's designed to work in the majority of cases but I haven't tried that case specifically
Snow 3D is the only one you can choose, most do not bring up anything except an error message, frustrating!
Is there a difference in connecting the 12v pwm to cpu fan on the motherboard instead of the aio pump?
Hi!
hydroshift lcd 360tl The CPU and GPU temperature display on the LCD is tilted to the right. How can I make it straight?
It would be nice to include thetmsl testing.
@@kennethz3366 it wasn't meant as a review as I didn't test it like that and it would have been unfair to do so since I swapped the fans for SL120 fans. However I did show some benchmark results at the end of this video ruclips.net/video/nbHj9sIZbVU/видео.html
Do the tubes have to be on top of the pump or could the be on the side?
You can side mount apparently but that does defeat the point of the design
@ i don’t mean the radiator. I’m talking about rotating the pump head 90 degrees so you dont have to bend the hoses so much. The lcd will be sideways but that’d be an easy fix in l-connect.
I run a Galahad 360 with a push pull fan config and was looking to upgrade to a new AIO does this one support a Push Pull setup or would you recommend one. My pc gets really hot because I use a 7800x 3d and a 4090
Good question. I'm not sure the impact push pull would have on the tubing.
Yes, the Hydroshift supports push-pull configurations. I installed a Hydroshift 360S last night and I swapped the stock fans for 6 UNI INF 120s. Im also running a 7800X3D and a 4090. Previous 360 aio was an Arctic LFII 360. Temps are identical. I shifted from a Lian Li Lancool 2 Mesh to a Lian Li O11 Evo RGB. Top-mounted the rad and while a tight fit, the push-pull 360 setup barely fits (ven witht he mobo in the lowest position).
PWM cable from the pump, are we plugging it in the CPU fan header on the MB or the PUMP header on the MB??
aye I have same question. I used pump header but prawn is using fan header
Wondering the same as well has anyone found the best option?
Mine is in pump and runs perfectly
I use pump header just because there must be a reason for seperate pump headers, like optimized speed changes to account for fluid instead of air, otherwise why have them.
What if you are using the AM5 Thermalright CPU holder? Will the mounting bracket clear that holder the same?
Might sounds like a noob question but, why is the software showing 4 fans for the cpu cooler while there's actually only 3 fan mounted on the radiator? What am i missing? 🤔
It's just the software default showing the max amount of fans supported per channel on the hub, you can select how many are actually installed on each individual channel and it will gray out the extras in hardware setup and adjust the lighting effects to the physicaly installed fans but always shows the maximum available per channel on the lighting setup screen for some odd reason.
@o0Silverwolf0o awesome, thanks alot for the answer I got all the parts for my new setup waiting in the closet and waiting on my gpu and cpu to be shipped.. Glad that there's no real issue with the software 😃
All I want to know it can you use infinity fans with this
Theoretically
on the Lian Li website its say "It is not recommended to plug the 12V PWM Pump cable into the CPU OPT port. Please connect it to a CPU FAN or AIO PUMP header instead and set the port in BIOS to PWM mode."
i would like to know the difference because i'm relatively new to PC builds is the correct way to install it on the motherboard the one you showed in the video? or should i follow the website instructions ?
Yes use CPU fan. I didn't use opt
@TheProvokedPrawn thanks I wanted to double check since I've never knew the difference on those pins
@@Punished_Luna i was getting pump failure on cold boot if i plugged it in cpu fan for a few seconds, like the pump takes sometimes to turn on 😅 but resolved in pump fan strange.
Nice video mate. What's the game at the end? Thanks
Bellwright
I own a Kraken elite 360(2023) do you think it's worth upgrading to this?
Ion know
i have just built my new pc with the same ryzen board and tl hydroshift but thought I had to use the pump header not the fan header like you said. Should I move the connection from pump to fan header on motherboard? I have not tried to boot yet as missing something to complete the build
It'll likely be fine with either.
Hey quick question, if I’ve had another AIO installed and don’t have the old standoff screws can I replace them easily?
I don't understand the question I'm afraid.
@ sorry I’ll clarify. So on step one essentially of the amd installation where you remove the original standoff screws. I do not have those or the standoffs, probably misplaced. Can I use the screws that came in the hydroshift box? There’s 12 of them
@Jordan2SK ah that's unfortunate. I don't think any of the includes screws are the right size are they?
@ can’t really tell based on the threading, but the top of the lian li ones are flat Phillips and the ones in your video from the AM5 board appear to be round Phillips. Moving houses really doesn’t help with keeping PC part boxes
I was planning on swapping the fans on this aio and reusing them as exhaust on an upright mounted gpu, are the connectors that the fans on the R model use generic or can they plug straight into the connector hub?
Not sure
Edit: Figured it out. Yes, I neglected the cpu header. Plugging it in fixed everything.
I did the fan swap on my hydroshift. Fans are connected to controller, aio's usb is plugged in, but the pumps aren't working. Got the fans at full speed for now, but I can't figure out why the pump won't go. Do I perhaps need that cpu fan header connected?
Hello, do you find a solution ?
Same problem
@@jackoneill5387 Yeah, plug in the fan CPU fan header.
You have the 360r as well ?
Same problem, the pump is not running
I know it's a stupid question but i need to ask because i would love to have this aio. Is this compatible with LGA 1200 does it have a mount or something for LGA 1200?
Would the fan swap on the hydro shift work with the new SL wireless uni fans?
Yes, but trust me when I say this. It’s pretty hard to get your hands on them.
hey i watched all your videos about the lian li stuff.. i bought myself the infinity fans (reverse and normal) i bought the aio too and now i have a shineing rgb monster and i want it to shine even in sleep mode but every time it goes to sleep mode the rgbs turn off and i cant fix it.. i saw some guy changing anything in the windows entry for sleep mode.. but i dont know what and how.. and dont find the video again... i already tried bios but it doesnt work too...
Not a clue how you'd do that I'm afraid.
Why doesn't the aio not plug into the aio header on the mobo? Why does it go to the CPU fan position?
I plug it on pump fan header. Can’t see any trouble. Just m’y CPU is hotter after swaping fans… like +15 degrees difference
Hi Prawn, Have you heard anything about the release date of the 2024 Lian Li cases? I'm mainly interested in the Lancool 207. Just wondering if you heard anything. Thanks
Update: late Q3 for both lancool 207 and 217 according to Lian Li support.
I haven't I'm afraid
It Will be released in q3
@@Andersg85 thanks! I also got a reply from Lian Li support and they said both the Lancool 217 and 207 will be released in late Q3.
hey I have question about your motherboard Asrock LiveMixer. since it has that epd port then can we use any screen on it? I have that good quality 1080p touch screen(40pin) from my old dell laptop but I'm not sure if that motherboard will even detect it or may ended up burn it.
If my fans turn on but my screen doesn’t. Do I have a faulty pump?
I have the same problem.Have you figured this out yet?I just booted my pc for the first time though,I haven’t even downloaded windows yet but I supposed the lcd should turn on anyway
@ make sure your ram sticks are pushed in all the way lol
I tried to do a fan swap to sl-inf 120 but the pump no longer turns on if I reconnect the old fans it works again, how did you do it?
Is additional bracket inside of box ?
I’ve been having issue with my hydro shift aio screen reading zero for the cpu. If I restart a few times it sometimes comes back. All other stats show normally. It will work for a few days or sometimes a day. It’s random. I’ve done the c++ updates re installed etc. is this a known issue? to make this longer and more endless 😊
i take it i cant put my sl 120 v1's on this as its the new fan connector?
I installed my Hydroshift 360 TL like the one in the video on same MB but the fans spin at full speed ..Can someone help Pls
If they're connected to a motherboard fan header, goto the bios and set them to PWM mode. Otherwise look for speed controls in L connect
I installed my Hydroshift like the one in the video (4-pin to cpu_fan, argb to 5v argb header, sata to sata) but every time I boot up the computer, I always get an error message saying “CPU Fan Speed detection error”. How to fix this? Should I just bypass it by (change cpu fan speed from monitor to ignore)?
You can do that or change the cable to the CPU fan instead.
@ but the cable is already inserted to cpu fan header
I wish I get send stuff to review every time.
HEY BROTHER DOES THIS COOLER FIT IN THE THERMALTAKE VIEW 71 PC 🖥 CASE?
How loud is the AIO ?
Question maybe somebody has insight as I’m new and just built my first pc. I have the same aio lian li hydro shift rgb version tho so my fans completely light up. And when I turn on my pc, the fans start and the rgb flickers for half a second then turns off then about 5-6 seconds later everything turns on fine. I noticed he also has a delay for the screen like I do but the flicker is just confusing me.
Windows does weird things while all of the background processes are starting up. Nothing to worry about as long as your fans + rgb turn on and are recognized in your Lian Li software!
Hi Everyone Im Lookng to get this 360 for my build.But would it cool a 14900ks cpu with a Godlike max mother board???????
Yes
Does the R come with a controller?
no
@@TheProvokedPrawn noted, thanks
Can we setup 6 fan top on this aio ?
@TheProvokedPrawn Hey! I bought this model and after installing it following your video the cpu temp goes from 0 to 90 in less than 1 minute. Do i need to change any settings on BIOS for the CPU Fan cable be recognize by the board? Asking because it always was giving me the message of "No CPU Fan" while booting and since it is plugged there seems awkward. Pls help me i really need it. Running a Asus Rog B-550 A with a Ryzen 5 5600X if it helps.
Have you connected all the power cables correctly? Is the pump properly secured or could it be loose? ruclips.net/video/nVkN8diBIAE/видео.html
@@TheProvokedPrawn Everything was in place, fans running and also could get them on L-Connect but never got signal from the pump there like in your video. But yeah, temps went from 0 to 90 really fast. Like i told you, was watching the video while mouting it on my system so i think i got it correctly done. Was just asking about something on BIOS because i think you can set the cpu fan to PWM or Volts. My mistake might be there. Didnt you went to your bios and setup the Cpu Fan for PWM?
Does this fit in the king 95? I bought both I feel like I might have to return something
Is it ok for thardripper
I like that AiO design but I'm hesitant because Lian Li's AiO's constantly failing due to clogged pumps.
Constantly? I've only heard of one version of their older AIOs that that happened with. Unless you know different?
@@TheProvokedPrawn According to reddit the Galahad as well as Galahad II Trinity tend to fail within the first year.
Dude got deeeeeeeep voice
Everthink for you frend 😂
What?
the galahad is better in my opinion
Why do you think that? Torn between the two
Disappointing its worst than the Galahad II temperature wise
I have the Galahad 2, I was thinking about swapping it for this
First
So are you a paid shill? Like no performance numbers? No comparisons! Call it an install video and unboxing not a review. Hate paid shills
Where does it say anywhere in the title or anywhere else it's a review? It's a setup guide. Performance details I put in case reviews because the cooling can be influenced by many factors.
$625 for the only one on the Canadian Amazon site, i'll pass lol.
Any extra noise (gurgling) with the tubes to the LCD being on top?
No
Can I flip these fans to use in exhaust and keep rgb?
Can i side mount it?