Loved it! I really like that the tracks have the holes in them to help push trapped material out of them and that the new tracks are slightly wider. Now you need a powder coated set for the "new" dozer!
Been watching since season 1 and I could tell right away which dozer it was because of the blade! Love the grey tracks much better ! And that HORN 💀 that’s beautiful man! I wish I could find a hobby I love like yourself!!
With these new caterpillars I think everything will be much better and in addition it is a great idea to have taken without paint, when they will be rusted, the bulldozer will have a great look !! Very good job aging is very successful !! and looking forward to seeing these two bulldozers at work in the next episode of youtube gold !!
If you can bend the head of the tool without it braking, It will give yourself some angle for the tool face to line up with the pin just like a box end wrench "kink" for clearance. Love the videos, And definitely like the longer episodes of RUclips Gold!!!!
Ha, yea that last pin is always a bit tricky. Need Thomas to come up with a spanner! Thinking back wish i"d gotten the non painted version as you did, looks awesome!
Very awesome Medic. I said the one to the left before I watched the video just from the picture from the thumbnail. I remember when you got it for RUclips GOLD! 😉😎😊
I love the new tracks, I think they look better than the powder coated tracks (not that the powder coated look bad). I know this might sound a little crazy but I also liked that you included the few takes at getting the clip on. It shows that no matter who you are, one just needs to keep on trying.
Would have gotten them powder-coated with a few raw links to look patched in. Could have done some quick weathering on the fresh yellow and let the patch-links weather naturally.
Sweet tracks, cant wait till Sunday, weather permitting. The RC4WD tracks should have had the clearance hole in them, the new ones have the right attention to detail including the hardened pins👍 Btw, I love that you went back to the needle nose with the clips. Sometimes a little dab of grease can help keep it in place. The reason I like the pliers better than the tool is that with the tool you are kind of blindly installing while with the pliers you can see and feel your success. Lol I'd like to come operate a dozer for you one day.
Very cool Medic.. The dozers are one of my favorite rigs out there In YTG .. Like those raw Tracks, as is. But I like the idea of a patched look. All yellow with a couple Steel thrown in there... THanks for sharing...
Woohoo i guesses correctly. I also could tell via the RC Sparks sticker and i remembered you mentioning that you aged the new one. As for season 1 yap watched it.
Looks good aaron. I think the raw links look better. Really goes with the old worn out theme. Like its been worked hard. Theyll really look good wen the rust a lil
I really like that RUclips Gold. Really fun to watch, really like to see how much gold you all get at the end. I am going to guess and say the one on the left is the old one. Just a guess. hey I got it right.
THE DOZER ON THE RIGHT IS THE OLDEST,AND THEY ARE BADASS,WISH O HAD ONE,BUT WIFE WOULD KILL ME IF I SPENT THAT ON ONE,BUT IF I AM TO BUY ONE IT WOULD BE ONE LIKE YOUR TWO.KEEP PUTTING THE VIDEOS OUT.
Wow when i read your post the other day and you saying about expensive rc i was thinking 600-800 maby a little more but seeing that bulldozer is 3,100 my jaw dropped that is a serious hobby just to be clear im not complaining i think its awesome that rc has come this far to have hydraulic and full metal rcs that can actually work hard u guys are awesome keep it up
Hi bud i have been following youtube gold from the start and also loading wars im a very big fan. keep up the awsome work im also a fan of crazy joe he is very funny lol.
Yeah these tracks awesome, you had me fooled I was going to say that was the oldest. Great job i'll be watching for more. Love RUclips gold, of course can't forget loading wars
The powder coated ones look nice and pretty but like you said the rusty one's will look really cool once they're going for a while in our opinion.. lol
Not only is it extremely easy because the old RSC Sparks sticker but The one on the left has scratches on the push blade versus the one on the right has artificial patina paint which looks really good👍👍👍👍👍
so funny.. because I fooled you! The one of the right.. is not fake pain on the blade... Lol The one on the left.. Fake paint on the blade.. Lol ;) The right is actual bare metal
trying to watch more of your vids again, I am subscribed to over 100 channels (not all I watch). I kinda lost a bit of interest or something in rc for a bit and kinda forgot about my truck. but I watched off and on I never turned off the bell from a few years ago. I just got to take my axels apart to make sure my trucks working ok. it's just the task of doing it and time
Think the metal tracks will weather nicely to match the dozer, i say leave em.. And i personally liked the video of you weeding, tiling the garden with the original,
I can see how amazing that tool is except when it comes to tricky locations like the one you had, I think you need another one then bend the tool so it fits it to tighter areas on your machines. While your at it get me one as well, just kidding I get my own one day. another awesome video
Actually , the track tensioners , are piston driven , the way you adjust the tracks on most dozers ..is with a grease gun .. the do have springs but it's mostly for shock absorbtion ..so the tracks can loosen when rocks try to go threw the bogies and cogs .. it's best to leave some slack to allow rocks room to squeeze between the bogies and the tracks so it doesn't bend pins and break the links
The little bit of trouble you had putting in the clip is great to see even you can get aggravated good lesson for us all to see just keep trying it with work some time
HELLO, RC ADVENTURERS! Click that "Notification Bell" to stay up with my latest uploads...
Just sneaked off and watched at work. Shh don't tell my boss. Rc for life!!
Love the videos been here when you were in your old house
I would like to buy one of these bulldozers but I can't seem to find the quality that you have here, I'm not a Facebook user how do I go about this?
alf beef go to Rc4wd.com, it’s where I got them
Hey RCSparks can you upgrade these bulldozes? Just wondering before I get one
Loved it!
I really like that the tracks have the holes in them to help push trapped material out of them and that the new tracks are slightly wider. Now you need a powder coated set for the "new" dozer!
Always watch every episode of RUclips Gold!!! Best thing on youtube!!!!!!!!!!!!!!!!!!!!!!
RUclips gold forever. Best series on RUclips by far. I love it keep up the good work.
Very simple, the one with the old rc sparks sticker is the "old" one🤷♂️
Wrong its the new one the old one is the less weathered one
When the clips go flying!! Trust me that is nobody's favorite part of the hobby;) I am still laughing:) 1000 thank yous from my family to yours!
Been watching since season 1 and I could tell right away which dozer it was because of the blade! Love the grey tracks much better ! And that HORN 💀 that’s beautiful man! I wish I could find a hobby I love like yourself!!
Raw tracks look amazing!! & will look better as they get used! Loving your content! Keep up the great work!
With these new caterpillars I think everything will be much better and in addition it is a great idea to have taken without paint, when they will be rusted, the bulldozer will have a great look !! Very good job aging is very successful !! and looking forward to seeing these two bulldozers at work in the next episode of youtube gold !!
I love reading your comments Sator! Thank you :)
@@TheRealRCSparks You're welcom Aaron, it's always a pleasure for me to watch your videos . Have a good day 😊👍
Wow nice job, I didn't know you painted all that aged look
I haven't been with RUclips Gold since the beginning (of season 1) but I have seen every RUclips Gold video
The weathering effect came out fantastic!!
🐸 Probably the dozer you weathered is newer, but that is just a guess. Later
13.36 made me laugh forever. Great vid and awesome sense of humor Medic.
If you only knew how many grouser bar replacements I have welded bro! Great upgrade to an already amazing dozer!
If you can bend the head of the tool without it braking, It will give yourself some angle for the tool face to line up with the pin just like a box end wrench "kink" for clearance. Love the videos, And definitely like the longer episodes of RUclips Gold!!!!
The one on the left in the beginning of the video! Love the show man! Been watching for years!
Both colors of track look great.
The left hand one from my angle is the one from last year.
I 2nd that. The one on the left
Jupp the one with the old rc sparks sticker👍🏻
Ha, yea that last pin is always a bit tricky. Need Thomas to come up with a spanner! Thinking back wish i"d gotten the non painted version as you did, looks awesome!
12:40 So perfect, Michael Scott would be so proud
You did a really good job on that puppy. It looks like the last dozer I operated before I got out of construction work. 😁👍🍺
Very awesome Medic. I said the one to the left before I watched the video just from the picture from the thumbnail. I remember when you got it for RUclips GOLD! 😉😎😊
I like the raw tracks better. The weathered effect is top notch. Love the channels! Keep up the good work
Omg, putting that clip on was killing me lol just grab a small screwdriver or needle-nose pliers
I love the new tracks, I think they look better than the powder coated tracks (not that the powder coated look bad). I know this might sound a little crazy but I also liked that you included the few takes at getting the clip on. It shows that no matter who you are, one just needs to keep on trying.
These little scale dozers always impress.
Would have gotten them powder-coated with a few raw links to look patched in.
Could have done some quick weathering on the fresh yellow and let the patch-links weather naturally.
wow that's cool I can not wait to see him in action with his new tracks
I watch all you’re videos been watching about 7 or 8 years
I think it is the one with the driver with the safety vest on. I love youtube gold.
Can't get no gold with the dozers on the table. Lol. Love all the vids brother
Man those dozers are awesome 👍👍👍👍 love the new tracks I can’t wait to see them rust 😎
Sweet tracks, cant wait till Sunday, weather permitting. The RC4WD tracks should have had the clearance hole in them, the new ones have the right attention to detail including the hardened pins👍 Btw, I love that you went back to the needle nose with the clips. Sometimes a little dab of grease can help keep it in place. The reason I like the pliers better than the tool is that with the tool you are kind of blindly installing while with the pliers you can see and feel your success. Lol
I'd like to come operate a dozer for you one day.
Very cool Medic.. The dozers are one of my favorite rigs out there In YTG .. Like those raw Tracks, as is. But I like the idea of a patched look. All yellow with a couple Steel thrown in there... THanks for sharing...
Man those tracks look cool! I think i like them better then the yellow once. And the holes just give that extra bit of detail to it.
Ooo I can't wait to see that baby in action this Sunday on RUclips Gold. It's gonna be epic. Thanks medic
Love the horn! Wish my car had one.
Great video enjoyed watching keep up the great work
I watch all of your videos none stop dj medic
Woohoo i guesses correctly. I also could tell via the RC Sparks sticker and i remembered you mentioning that you aged the new one. As for season 1 yap watched it.
RUclips gold is by far my favorite show on RUclips right now
Great choice on the tracks 👍
Looks good aaron. I think the raw links look better. Really goes with the old worn out theme. Like its been worked hard. Theyll really look good wen the rust a lil
YOU TUBE GOLD SEASON 2. Love it please keep doing the awesome R.C. videos!!!!!
The unpainted tracks look great on that rig!! Bell & Like confirmed
I really like that RUclips Gold. Really fun to watch, really like to see how much gold you all get at the end. I am going to guess and say the one on the left is the old one. Just a guess. hey I got it right.
I like the raw tracks with the old looking paint
Rc sparks stickers gives away the older one.
All the videos are great!
One with the stickers on it other one is the new one I remember that you put stickers on the 1st one Thank you for the videos
The one on the left
oh man i love this Dozers :D please more detail-vids with explaining how it works ...
THE DOZER ON THE RIGHT IS THE OLDEST,AND THEY ARE BADASS,WISH O HAD ONE,BUT WIFE WOULD KILL ME IF I SPENT THAT ON ONE,BUT IF I AM TO BUY ONE IT WOULD BE ONE LIKE YOUR TWO.KEEP PUTTING THE VIDEOS OUT.
I really like the new track better because they will rust. Keep up the amazing work sir
lovr the new dozer. awesome. love the shows.
I’m liking the raw look, hopefully they rust quick.
I like these tracks better than the yellow ones. 👍😁
Wow when i read your post the other day and you saying about expensive rc i was thinking 600-800 maby a little more but seeing that bulldozer is 3,100 my jaw dropped that is a serious hobby just to be clear im not complaining i think its awesome that rc has come this far to have hydraulic and full metal rcs that can actually work hard u guys are awesome keep it up
E rings. We here in the us sometimes call them jesus clips. When they go flying across the shop, it's like jesus christ. Lol
@Orange Crush RC sorry don't mean to insult anyone. I'm in the northeast. I'm an automotive mechanic and have heard and said it plenty of times lol.
I love you gold videos
Hi bud i have been following youtube gold from the start and also loading wars im a very big fan. keep up the awsome work im also a fan of crazy joe he is very funny lol.
Yeah this is awesome !! Yeah those E clips just got a Love them !! Appreciate you sharing medic
Yeah these tracks awesome, you had me fooled I was going to say that was the oldest. Great job i'll be watching for more. Love RUclips gold, of course can't forget loading wars
I can't wait for the rust as well
Looks great medic with the new tracks I've been getting all your new video notifications
Eclip HOLDER👀👀👀😍
It’s your fault I have one of these dozers on the way lol. I can’t wait love the construction content
The powder coated ones look nice and pretty but like you said the rusty one's will look really cool once they're going for a while in our opinion.. lol
Not only is it extremely easy because the old RSC Sparks sticker but The one on the left has scratches on the push blade versus the one on the right has artificial patina paint which looks really good👍👍👍👍👍
so funny.. because I fooled you! The one of the right.. is not fake pain on the blade... Lol The one on the left.. Fake paint on the blade.. Lol ;) The right is actual bare metal
So awesome 👏 you sure did. Good job 👍 and lots of RC love ❤️ and respect ✊.keep up the great work.
trying to watch more of your vids again, I am subscribed to over 100 channels (not all I watch). I kinda lost a bit of interest or something in rc for a bit and kinda forgot about my truck. but I watched off and on I never turned off the bell from a few years ago. I just got to take my axels apart to make sure my trucks working ok. it's just the task of doing it and time
Think the metal tracks will weather nicely to match the dozer, i say leave em.. And i personally liked the video of you weeding, tiling the garden with the original,
I think I prefer the tracks you used. I guess the yellow ones will look cool when they are worn. Looking forward to your Thrasher V3 video!
Hands on repair an upgrade 👍🏻👍🏻💯
Liked, shared and commented. I like the unfinished tracks better
I can see how amazing that tool is except when it comes to tricky locations like the one you had, I think you need another one then bend the tool so it fits it to tighter areas on your machines. While your at it get me one as well, just kidding I get my own one day. another awesome video
I been watching both seasons bud an drinking a cold bud light !!!!!!
Would like to have a 72 chevy 4x4 green remote control long bed would be awesome but don't know where to find it!!!!
My papaws truck was that so thought it would be cool to have one
Can't wait to see if you can find your drone!!!!
love RUclips Gold👍🏻👍🏻
The new tracks match the old look of the dozer. Like it should. Looks like many hours of dirt moving. Pop a top. 😁👍🍺
Actually , the track tensioners , are piston driven , the way you adjust the tracks on most dozers ..is with a grease gun .. the do have springs but it's mostly for shock absorbtion ..so the tracks can loosen when rocks try to go threw the bogies and cogs .. it's best to leave some slack to allow rocks room to squeeze between the bogies and the tracks so it doesn't bend pins and break the links
Those tracks look killer!!! Like you said, a little rust and they'll look even better!!!!!
Man I love those thing
#RUclipsGold
The little bit of trouble you had putting in the clip is great to see even you can get aggravated good lesson for us all to see just keep trying it with work some time
Love all youtubgold
Always like a tool, also noticed they sell the e-clip removal tool ax well.
The one thats weathered more, the one on the right, is the older one
Oh dang u did a good job weathering cus u tricked me LOL
RUclips gold season 2 🙌🏻🙌🏻
Keep up the great videos
Great review of an Aussie product 👍.
Im getting all your vids, keep at it.
Keep up the good video 👍
I think that the oldest the look is, best is the final result for outdoor Work!! The New tracks are better but not enough used look..
Very Nice tracks!
Your e-clip tool would work perfectly if the end was bent at an angle. Just the one for the dozers. The horn is Boss too. Lol
This reminds me of changing Abrams tank track. If you want to see a tank crew working hard, watch them installing new track.
Love the none color just adds the ages look
Even with the bell clicked your videos do not show up in my recommended list.
I do still get every notification though.
how i new the left one was older one was the bucket had scratches that look like real use
To He clean looking one you had last year and the rusty looking one you got this session
Beast machine 👍
Thanks for the viedo man hope you are well.
Thank you sir