@@austinarmbrust3401 my 96 LT1 camaro had a horrible manifold leaks a a spun bearing and it literally sounded exactly like that at idle. And super raspy sounding at a rev like that
ok i hope you didnt do the headers cause they are leaking really bad and the only reason that factory tbi motor has a lope is because it no longer has cats and cant properly meter the fuel i heard it change timing three time before he took off and once while he was wide open, that truck sounded really bad and ran like a three legged dog
@@Thedriver96207 You want it done when the exhaust is at higher velocity for better efficiency. That's why on factory cars like Mustangs, Camaros and Challengers, the crossover is always closer to the engine, usually just after the cats.
Typical squatted truck guy, truck clearly needs work under the hood with that horrible sound but let's dump money lowering half the truck and making it sound like shit
He's going mess them tips up with that squat. But its his truck. Sounds good though. Wish I could find the right long tube headers for my 1994 caprice 9c1.
@@isukapvp8971 Possibly but I am honestly just waiting to blow the motor, install a new crate motor with summit heads but put an lt4 hot cam in it first. And possibly a marine intake. I'm rebuilding the rear suspension atm.
I have a 1998 with poppet injection. What cam should I get? My exhaust is similar but I'm going to put long tube headers and an h pipe. Any help is appreciated
@@davidfirth9342 imagine this slots of people ls there trucks there’s and ls5.7 I was just curious to see what other would respond and if you don’t like it don’t say anything otherwise your the one looking stupid right now
not a fan of the squat, but respect that he has longtubes instead of no cats. Clean build!
It’s not squated it’s a 5/7 drop 🤷🏾♂️
Those are mid-length headers.
@@AdmiralRustyShackleford long tubes
@@built_5.76 No, long tubes hang down further, almost reaching the crossmember. These are mid-lengths, they don't drop below the engine at all.
Definitely look like shorty headers
Oof I don’t like how the left tailpipe come in front of the differential. And you can’t beat a straight piped 5.7
i thought yall uploaded this b4
Where are you guys located at?
needs to fix the header leaks
True duals got a cam in it and got a midget gremlin with a tiny hammer beating on sumthin inside the engine
Heard that too.
Header gaskets are bad
@@chopplolo72 hell if they was bad and he was just at an exhaust shop why didn’t they fix that shit for him before they put it on video 🤦🏼♂️
@@dommeister4004 that's what I thought. Headers are overrated on stock motors anyways. Those damn gaskets always cause a headache.
probably a loose lifter or exhaust leak lol
It’s either got an awful exhaust leak at the headers or she’s knocking
I heard that shit
I think she’s knocking and I also think it doesn’t have a can in it lol
@@austinarmbrust3401 my 96 LT1 camaro had a horrible manifold leaks a a spun bearing and it literally sounded exactly like that at idle. And super raspy sounding at a rev like that
@@austinarmbrust3401 it’s header leak and it indeed is cammed
@@built_5.76 I had a header leak on my 289 hipo it had hooker super comp long tubes,It was cool but annoying
Definitely doesn’t sound cammed, sounds like it has a vacuum leak, exaust leak, and a miss lmao
That shit sounds like and old impact gun.
Sounds like those headers are ready to fall apart 😂
Had that happen blew the fuck apart
ok i hope you didnt do the headers cause they are leaking really bad and the only reason that factory tbi motor has a lope is because it no longer has cats and cant properly meter the fuel i heard it change timing three time before he took off and once while he was wide open, that truck sounded really bad and ran like a three legged dog
all kinds of sensors are going nuts lol
Sounds like got a manifold leak guessing he didn’t wanna pay for that Lolol sounds great tho!!
Time to get the mulcher out
Seconded
Yep
It’s a5/7 drop
Someone call whistlindiesel there is another clapped out squatted truck.
The exhaust setup is ugly af 😂
I feel like an H-Pipe right around the rear axle would have made this sound even better. Nice clap! 👏🏻
Better placed as close to the engine as possible, right after the cats is best.
@@AdmiralRustyShackleford didn’t know that! For some reason I figured you would want the exchange as close to the exit as possible. Maybe both?
@@Thedriver96207 You want it done when the exhaust is at higher velocity for better efficiency. That's why on factory cars like Mustangs, Camaros and Challengers, the crossover is always closer to the engine, usually just after the cats.
Sounded like it was knocking
Sounds like bad exhaust leak at the header
That’s what I was thinking my lt1 camaro had a bad manifold leak and was knocking and sounded exactly like that at idle
Typical squatted truck guy, truck clearly needs work under the hood with that horrible sound but let's dump money lowering half the truck and making it sound like shit
All that but left the shop with an exhaust leak? Cringey lol
This is a real exhast shop! Love it! Btw best street pipes i ever heard were a 12/1 355(pistons) Chevy.
Trust me guys thats a knock mine that I had when I was 16 had straight true duals was cammed thats just a bad motor
I like the chop chop but not the engine tap tap.
I just realized one of the tailpipes is madrell bent the other isn’t
Needs some mufflers.
2:44 you have a leak somewhere manifold needs a good tube too.
He's going mess them tips up with that squat. But its his truck. Sounds good though. Wish I could find the right long tube headers for my 1994 caprice 9c1.
Get some flowtech 49150-1FLT headers. Direct fit for my 95 Caprice
Man I probably would’ve gone with bigger sized pipes and an x or h pipe
Sounds good once he gets new gasket he be all set
dammm it has a bad lifter tick 😂😂
Has a knock or headers are leaking.
I like the exhaust work not gonna lie but I'm not digging the sound too much. I think the engine needs a little tlc.
There is so much wrong here
Can you make my 97 chevy k1500 sound exactly like that?
He done got clapped 👏 out
We call that a pig were I’m from, but yea dope truck
The exhaust sounds good but that clanka has me worried.
Tell me the truck owner is white without telling me the owner is white lol
Needs flow masters
Needs a crossover like an x pipe
Damn I cant wait till I can hear leaks like you m******s
Damn I've been looking all over for some 6 inch slash cut tips
I hope this is sarcastic
thats easy the best sounding truck ive ever hard
I love it. I have a very similiar setup on my 5.7 but no cam.
Any plans to cam it?
@@isukapvp8971
Possibly but I am honestly just waiting to blow the motor, install a new crate motor with summit heads but put an lt4 hot cam in it first. And possibly a marine intake. I'm rebuilding the rear suspension atm.
@@Meatwad.Baggins dopee, either way that'll be sick
Definitely has a headers leak
What would you recommend for me to help my performance on my 1998 Chevy Silverado C1500 5.7 v8 all i done to it was put a cold air intake in it
How much if I bring my truck in?
Why are you yelling?!?!?!? Ffs
That baby need a transmission don’t it
Sounds like he needs a new engine
Sounds damn good
That thing sounds like shit 😆
Needs a rebuild 😭😭😭
That squat is horrible
350 Sounds real nice
Sounds horrible
not a fan of the big tips
Sounds terrible
Where is this shop ?
What rimd
sounds bad ass
Why does it sound bad 🤔👀 is it misfiring
header leak
What part of Tennessee yall in.
3560 Dickerson road Nashville TN 37207
Is this a tbi 350? Or is it swapped
It’s got a IG on the back window, built 5.7 but that could mean a lot of things I guess lol
@@IAM_HC “built” lol…. Honestly sounds like just another sqautted truck with small straight pipes and huge tips
Where u find them tailights tho lol
Haha bet he squats to pee aswell
OH WOW COOL MAN DID YOU PUT A NEW 350 IN OR WAS IT THE ORIGINAL!!!!!!!
Not sure that's a cam think is ticking and missing like a mofo ... Sounds nothing like my cammed Silverado at all
I have a 1998 with poppet injection. What cam should I get? My exhaust is similar but I'm going to put long tube headers and an h pipe. Any help is appreciated
@@lerch400block I have the f35 cam in one And a custom ground cam in my big block chevy
I don’t like squats but that sounds dope!
No, it sounds terrible, like a fart between wet asscheeks
@@onemichaelmarsee you think so?🤔 I think it sounds pretty good for a straight piped 350 cuz most sound terrible 😂
Love it yessir 💙🤎🖤
Sounds broken asf
Sounds like bad compression
exhaust leak
Sounds good 😎👍🇺🇸
I want to hear it like as driving
clap
its got that rod knock too lol
header leak, i have the same thing on my 2015 ram 1500 sport. but it does sound like rod knock though.
gey squat
its a drop but yeah she squatted a lil
@@05modda_ ya, dropped in the back lol. I’ve seen these same trucks riding on the doors level. He’s just gay
So when you say 5.7 as and ls or 5.7 350 ?
Definitely a 350
Stupid question
@@davidfirth9342 imagine this slots of people ls there trucks there’s and ls5.7 I was just curious to see what other would respond and if you don’t like it don’t say anything otherwise your the one looking stupid right now
That squatted truck sound sounds amazing tho
No, it sounds terrible, like a fart between wet asscheeks.
5/7 drop
That sounds amazing
123 on sound decibel's woOOOoow😲
I’m sorry but,That engine sounds and looks weak as fuck. Doesn’t sound cammed, it sounds like it needs work.
Exhaust sounds shitty to me too.
Clapped out trash can..sorry 😞
Clapped out trash can..sorry 😞
Sounds awful
Sounds like poopy
LOVE it!
Thanks ma'am
First