I have the same issue in my 2014 Highlander and I'm going to try this myself. I was hoping to find a video like this that would give you the DIY way to do it. Thanks!
The problem is the upper worm wheel lining it up with all the pins , I used a marker to line the gears on the lower and drivers on the big notches ! But setting the upper dial pins on that upper clock type wheel there must be a certain procedure ? I am getting code B1443 history after replacing this one and the defrost face and floor is not working properly ? Any procedure instructions on upper flap dial pin positions ??
I have the same issue in my 2014 Highlander and I'm going to try this myself. I was hoping to find a video like this that would give you the DIY way to do it. Thanks!
The problem is the upper worm wheel lining it up with all the pins , I used a marker to line the gears on the lower and drivers on the big notches ! But setting the upper dial pins on that upper clock type wheel there must be a certain procedure ? I am getting code B1443 history after replacing this one and the defrost face and floor is not working properly ? Any procedure instructions on upper flap dial pin positions ??
Yep!! Had to disconnect every damn thing... Toyota is crafty... but it takes time to get it all undone.
Destroy... lol yep I did too.
So you basically yakked alot but never actually changed it. Got it.