2:37 "as you can see, if the back of my head wasn't covering the entire assembly, the belt isn't making very good contact... LOL But seriously, thanks for the vid, it helped me get started on the project.
At about 5 minutes in is where you take the z bend cable end, have it 90 degrees to the hole and insert it then move the cable end parallel to the bracket with the hole in it. I wish you the best on your repair
I put a new belt new blade adapter and new wheels on the back with self-propelled and my mower still won’t move when I pull the handle it has a cable could the cable be bad?
![Troy-Bilt Self Propelled Lawn Mower Problems and Belt Change [Won't Propel]](/img/1.gif)
2:37 "as you can see, if the back of my head wasn't covering the entire assembly, the belt isn't making very good contact... LOL But seriously, thanks for the vid, it helped me get started on the project.
I record from a tripod, maybe someday I will have an assistant to do the recording. Glad it helped you out
This is a good video and help me a lot. Thank you so much!
glad to hear that
Excellent tutorial! Thanks.
Glad it was helpful
thanks for explained everything it helps a lot.
Glad it helped
This is a really good video!
Glad to hear you liked the video
Didn’t notice how the small spring connects with the controller cable. Can you help with that ??
At about 5 minutes in is where you take the z bend cable end, have it 90 degrees to the hole and insert it then move the cable end parallel to the bracket with the hole in it. I wish you the best on your repair
I put a new belt new blade adapter and new wheels on the back with self-propelled and my mower still won’t move when I pull the handle it has a cable could the cable be bad?
That would be a good thing to look at closer. I wish you the best on your repair
These are probably the easiest to change the belt on and it’s best to grease the wheels every year under normal conditions 😊
good tip
My question is how did you get the blade adapter off, did it take a gear puller ?
I was lucky that it wasn't rusted on, you may have to install the bolt part way and use a puller off the bolt if stuck. I wish you the best
@@bbbjim1fixedit Thanks Jim, have a good evening.
Great job thanks
glad you like the video
nice video
Glad you liked it
Maybe put a lil dab of Loctite on that blade bolt
What was wrong with your blade adapter ? I have the same mower with the same issue. A new belt solved it. Good video.
glad you liked the video, as the blade adapter gets worn the belt slips a lot more, and glazes the new belt
you should go into a small engine business!!!
I just like doing it for fun and helping people out
keep ur head out of the picture when ur explaining
Sorry about that I was recording from a tripod