Thank you for the print. I was about to open up Tinkercad and start playing around. I was almost sick thinking I wouldn't be able to make the 04 work with the f35.
This is awesome! I only fly Quadmulas as I have 4 F5s and a F35. Can't wait to give this a go! I seem to remember the TPU camera mounts were the same for the F5 and F35. Gonna test it out but thank you!
Have a quadmula F3.5 ready for the 04 unit. Thanks for the video and 3d print. Im also planning to use the 03 antenna as well....im sure there won't be a big difference in quality or range.
@@goose023i want to do same. If the goggle view is similar to o3 as im not chasing superior quality of onboard recording. And the lite is cheaper 😅 Also easy to apply the flywoo waterproof spray.
@@Lazy_SkyWalker The camera quality on the O4 Lite is a step back from the O3. Unless you absolutely need the smaller size and lower weight (e.g. a 2S whoop), you're better off buying a lite O3 from someone who is moving up to the O4 Pro. Just my recommendation if you value video quality both in the goggles and onboard.
@@Mangorille I’m wondering how much difference on goggle view. Yeah used o3 is another cheap option for budget man haha Thank you for your heads up and love your reviews and developments As I’m a 3.5” freestyle lover.
I had an f3 split build I was doing with an o3 from months ago and bought an o4 pro to replace the o3. This video was clutch cause I was worried about the camera fitting
Nice work getting the cam to fit. It looks like there may be some room to de-case the cam to reduce some of than volume but with a tradeoff of durability. Maybe Quadmula will release a redesigned top plate and cam mount
They released a new version of the djinn instead. But a 3d print, like the pod mount mount for o3/o4 on printables could be another solution to using current quadmula frames.
I expect they will release new frames for the O4 if the new F25 SP is any indication. They did a lot of redesign for the O4, a surprisingly lot of changes.
you need the 04 antenna i tried that way and when you fly around buildings and far away you get the same range as the 03 did but with the 04 antenna's i got much better range i had 60mbt even around building and flying much longer away you should put the 04 antenna's on it does make a difference, the only thing is mounting two instead of one which is a bit of a pain on smaller builds.
Thanks, I heard the same but really didn’t notice any issues and the mbps held at 60. Did you try any of those aftermarket two-in-one 5.8ghz antennas? I see that Flywoo makes one that could be perfect, it’s single band like what we have with the included O4 antenna.
@@eddietolbert5308 I don't think so, I saw tests of the OccuSync4 (what O4 actually stands for) when the Mini 4 Pro (O4 based) released and it had better penetration than the Mini 3 Pro (O3 based) as well. It's just a newer and beefier protocol.
Congratulations on getting the unit so early Looks like your camera plates are not soft mounted. Soft mount was a 'requirement' of the 03, but doesn't appear to be with the 04. Do you have thoughts or observations about this?
I ordered from Amazon at 8am on launch day. :) You need to print the camera plates in TPU, which allows them to be soft mounted. Using TPU to soft mount was the approach for the O3 and also the approach used currently for O4 by frame manufacturers.
Finally, somebody addresses the difference between the 03 and 04 in the goggle so in your opinion, did the 04 feel nicer looking through the goggles? Some people have said they don’t notice a difference at all but for me that is the main reason I would buy them . Image quality through the goggles is very important to me
The split has the bottom and top deck closer together so they say it flies a bit better, perhaps because the CG of the battery is closer to the motor plane. The bottom deck is also two pieces should you need to replace a part in a crash. It also weights marginally less.
With these rcinpower 1404 motors I've been getting around 4:30 in the winter with a 4s 650mah battery. I suspect you can get a bit more during the summer.
@@Mangorille perfect.. getting an o4 with T-Motor P1604 Motors - 3800KV, just deciding between going o4 pro or just the o4 lite to save some weight, reckon the camera installation of the Lite is going to be simple? Thanks again!
@ The 1604 motors are going to have less flight time, closer to 3 minutes. I like eye-candy so I'm more partial to the O4 Pro especially when it actually weights a bit less than the O3. How important is video quality and FOV to you?
Hi, currently I'm waiting for me o4 pro and lite units but to be honest with you your drone is very interested. Can you tell me more about it? What batteries, aio and motors are using? Is it under 250g? Thank you in advance
I made a build video on this frame a while back and the motors and AIO are what you see in my last couple of videos (Super F405HD and RCINPower 1404). Yes sub-250grams. Could This Be My NEW SUB 250 Gram 3" HD Freestyle Frame? | Quadmula Siren F3 Split & DJI O3 Air Unit ruclips.net/video/IKHoPryhvCg/видео.html
I did see that, they haven’t released a new F3 and F35 yet though. Honestly I’d like to see a retrofit kit, the new camera will fit with just a revised top deck.
Huge thanks for the prints I'm hoping this will work with the djinn f25, I know there is a new frame djinn sp but I'm hoping the 3d prints you made convert mine into 04
@ No, you’d need more than that. The bottom deck is different as is the 3D print for the camera holder. Those two I know for a fact but there may be other differences.
The air unit doesn’t report its temperature through the osd. I doubt it’s temperature related though, it was fairly cold out and I never let it sit around. My money is still on interference in the channel.
You need to move it forward way more than that. I went through 15 versions when designing this. I actually want to move it further back in version 16 to give the camera some protection. It’s a huge expensive camera to be hanging so far forward like that.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Thank you so much for this. Appreciate all your hard work making this happen for the community. Much appreciated.
Many thanks for the share of the print. My F35 will be reaching me shortly😁.
Awesome, that's a great frame.
@@Mangorillemay I know what props are those? The sexy red theme is what I’m going for😁.
7:15 - do you have power on auto? That’s what makes me think could be doing that.
I have power and channel on Auto, which is how I run the O3 as well.
Life saver. Thanks for the model! 25 degree angle is perfect as well!
Welcome. Selfishly 25 degree is what I run. :)
Thanks, your instructions are very clear
Welcome. Happy flying!
Thank you for the print. I was about to open up Tinkercad and start playing around. I was almost sick thinking I wouldn't be able to make the 04 work with the f35.
Welcome. Happy flying!
This is awesome! I only fly Quadmulas as I have 4 F5s and a F35. Can't wait to give this a go! I seem to remember the TPU camera mounts were the same for the F5 and F35. Gonna test it out but thank you!
I know the mounts are the same on the smaller quads, not sure about the F5 though.
Have a quadmula F3.5 ready for the 04 unit. Thanks for the video and 3d print. Im also planning to use the 03 antenna as well....im sure there won't be a big difference in quality or range.
I didn't notice any difference in my type of flying. I'm sure there is a reduction when you're flying way further out or behind some thick obstacles.
Hey, nice vid. Do you waterproof your drones to fly around snow?
Thanks. I just conformal coat the bottom of the AIO flight controller.
@@Mangorille How about you air unit, do you somehow waterproof that?(specifically an o3). Or do you just risk it.
Thanks.. very nice comparison :) I still can't decide what 5" to build with my O4Pro - what a 1st world problem to have at 2025
Haha. Whichever one you can find a mount for. ;)
Nice video, I am thinking of actually changing my f35 to the O4 (lite), just a little wary about the length of the camera cable.
Why are you looking at the O4 lite instead of the Pro?
@ just want to try it out. Make things lighter get under 250g. Have a full 03 on it now, and will use the pro on my 5”s
@@goose023i want to do same. If the goggle view is similar to o3 as im not chasing superior quality of onboard recording.
And the lite is cheaper 😅
Also easy to apply the flywoo waterproof spray.
@@Lazy_SkyWalker The camera quality on the O4 Lite is a step back from the O3. Unless you absolutely need the smaller size and lower weight (e.g. a 2S whoop), you're better off buying a lite O3 from someone who is moving up to the O4 Pro. Just my recommendation if you value video quality both in the goggles and onboard.
@@Mangorille I’m wondering how much difference on goggle view.
Yeah used o3 is another cheap option for budget man haha
Thank you for your heads up and love your reviews and developments
As I’m a 3.5” freestyle lover.
I had an f3 split build I was doing with an o3 from months ago and bought an o4 pro to replace the o3. This video was clutch cause I was worried about the camera fitting
Awesome, happy flying. It's a great frame!
Nice work getting the cam to fit. It looks like there may be some room to de-case the cam to reduce some of than volume but with a tradeoff of durability.
Maybe Quadmula will release a redesigned top plate and cam mount
They released a new version of the djinn instead. But a 3d print, like the pod mount mount for o3/o4 on printables could be another solution to using current quadmula frames.
I expect they will release new frames for the O4 if the new F25 SP is any indication. They did a lot of redesign for the O4, a surprisingly lot of changes.
you need the 04 antenna i tried that way and when you fly around buildings and far away you get the same range as the 03 did but with the 04 antenna's i got much better range i had 60mbt even around building and flying much longer away you should put the 04 antenna's on it does make a difference, the only thing is mounting two instead of one which is a bit of a pain on smaller builds.
Thanks, I heard the same but really didn’t notice any issues and the mbps held at 60. Did you try any of those aftermarket two-in-one 5.8ghz antennas? I see that Flywoo makes one that could be perfect, it’s single band like what we have with the included O4 antenna.
Makes me curious if the 03 with these antenna will get same range and penetration as 04
@@eddietolbert5308 I don't think so, I saw tests of the OccuSync4 (what O4 actually stands for) when the Mini 4 Pro (O4 based) released and it had better penetration than the Mini 3 Pro (O3 based) as well. It's just a newer and beefier protocol.
Congratulations on getting the unit so early
Looks like your camera plates are not soft mounted. Soft mount was a 'requirement' of the 03, but doesn't appear to be with the 04.
Do you have thoughts or observations about this?
I ordered from Amazon at 8am on launch day. :) You need to print the camera plates in TPU, which allows them to be soft mounted. Using TPU to soft mount was the approach for the O3 and also the approach used currently for O4 by frame manufacturers.
Finally, somebody addresses the difference between the 03 and 04 in the goggle so in your opinion, did the 04 feel nicer looking through the goggles? Some people have said they don’t notice a difference at all but for me that is the main reason I would buy them . Image quality through the goggles is very important to me
It did. I flew the o3 first and my eyes were in awe when I switched to the o4 pro.
@@Mangorille
Quadmula have the 04 version of the Frame
@@cafub2650 They only have the O4 version of the Djinn F25 right now. They haven't released the F3, F35, or F5 for the O4 yet.
Curious about why you chose the f3 split vs the f3? I don't know much about Quadmula frames.
The split has the bottom and top deck closer together so they say it flies a bit better, perhaps because the CG of the battery is closer to the motor plane. The bottom deck is also two pieces should you need to replace a part in a crash. It also weights marginally less.
@@Mangorille Thanks!
Please make a turn to the right every now and then if you are going to record your flights!
You should see my older videos, zero right turns, this one is decent as I’ve been working on the right turns.
Can you use ND / UV filters with O4 camera on F35? Does filters fit?
I haven't tried but I read that the Avata 2 ND filters will fit the O4 Pro.
@ yes, I was just thinking if they fit with f35 and o4. I’m not sure if there’s enough room for the filters.
How much flight time do you usually get? Curious as I’m hoping on the f35 myself with the o4 pro
With these rcinpower 1404 motors I've been getting around 4:30 in the winter with a 4s 650mah battery. I suspect you can get a bit more during the summer.
@@Mangorille perfect.. getting an o4 with T-Motor P1604 Motors - 3800KV, just deciding between going o4 pro or just the o4 lite to save some weight, reckon the camera installation of the Lite is going to be simple? Thanks again!
@ The 1604 motors are going to have less flight time, closer to 3 minutes. I like eye-candy so I'm more partial to the O4 Pro especially when it actually weights a bit less than the O3. How important is video quality and FOV to you?
Hi, currently I'm waiting for me o4 pro and lite units but to be honest with you your drone is very interested. Can you tell me more about it? What batteries, aio and motors are using? Is it under 250g? Thank you in advance
I made a build video on this frame a while back and the motors and AIO are what you see in my last couple of videos (Super F405HD and RCINPower 1404). Yes sub-250grams.
Could This Be My NEW SUB 250 Gram 3" HD Freestyle Frame? | Quadmula Siren F3 Split & DJI O3 Air Unit
ruclips.net/video/IKHoPryhvCg/видео.html
A instalação da o4 é igual a da o3 no pavo20 ?
I only tried the lite in the Pavo20 Pro. ruclips.net/video/678f3Tug7NY/видео.html
Quadmula now makes an 04 frame. The Djinn F25 SP is made to specifically fit it.
I did see that, they haven’t released a new F3 and F35 yet though. Honestly I’d like to see a retrofit kit, the new camera will fit with just a revised top deck.
Show de bola irmão vc comprou o frame compatível pra ela
Thanks. No, I created a 3d print file to make the existing frame work with the O4.
Huge thanks for the prints I'm hoping this will work with the djinn f25, I know there is a new frame djinn sp but I'm hoping the 3d prints you made convert mine into 04
Welcome. I expect it will work on the F25 as the frames are very similar but I only tested it on the F3 and F35. I did see the new SP, stay tuned. ;)
@@Mangorille i have the djinn, and curious if you could just buy the new top plate instead of the whole frame 🙃
@ No, you’d need more than that. The bottom deck is different as is the 3D print for the camera holder. Those two I know for a fact but there may be other differences.
@ well there goes my money 😂
@@ReedRoams If only DJI made the O4 air units compatible with the O3 camera...
Couldn't the 40 to 60 mbps be related to heat? Maybe put temperature in your osd. Just wondering😄
The air unit doesn’t report its temperature through the osd. I doubt it’s temperature related though, it was fairly cold out and I never let it sit around. My money is still on interference in the channel.
@@Mangorille Okay, and amazing video btw... as always :D
@@vasacermak1 Thanks buddy, happy flying!
The minor issue you mentioned at the end may have something to do with your using O3 antenna.
It’s not related. I had the same issue with the O4 lite using the included antenna.
Its here!
Yes buddy, quite happy with the Pro, lives up to the hype.
if you simply moved both holes forward like 1mm you wouldn't have to modify your frame top plate
You need to move it forward way more than that. I went through 15 versions when designing this. I actually want to move it further back in version 16 to give the camera some protection. It’s a huge expensive camera to be hanging so far forward like that.