IncuView Incubator Review

Поделиться
HTML-код
  • Опубликовано: 19 окт 2024
  • raisingquail.net
    Here's a review of the IncuView All-In One Incubator manufactured by Incubator Warehouse. It can be found on Amazon here: amzn.to/2ifa5pT One correction: the IncuView is NO LONGER eligible for Prime Shipping.
    The IncuTherm Thermometer/Hygrometer combo unit is also available at Amazon here: amzn.to/2iffSvx I highly recommend you get a secondary thermometer/hygrometer since most hygrometers that come with incubators are trash and it's always good to double check the thermometer to be sure you are at the correct temperature.

Комментарии • 9

  • @adrianavalos4861
    @adrianavalos4861 3 года назад

    Great info. Thanks 🙏🏼

  • @HollisNancysHomestead
    @HollisNancysHomestead 7 лет назад +2

    Thanks for sharing, good info! Have a peaceful week

  • @bryson3401
    @bryson3401 6 лет назад +1

    How well does it hold temp? The Styrofoam one I have is terrible about that.

    • @raisingquail1100
      @raisingquail1100  6 лет назад +1

      The unit maintains temp pretty well actually, especially since the walls are just plastic with no insulation at all. I do wrap a towel around it and have one underneath to help keep heat in and not burn as much electricity.

  • @naomimoore6694
    @naomimoore6694 7 лет назад +1

    Thank you for this review! I took your advice and got the incutherm to monitor humidity. It says my temp is at 102, but the built in thermometer is steady at 99.5. I was wondering if you found yours were different as well?

    • @raisingquail1100
      @raisingquail1100  7 лет назад +2

      I found that my built in thermometer was a bit off. Enough to not trust it. I use two CALIBRATED thermometers to test my temps and the IncuTherm is VERY close. With this IncuView incubator, you can adjust the temperature reading to your correct actual temp, so that's easy. But I still put an IncuTherm in there to be safe.
      You can use an instant read thermometer to test your IncuTherm, like one of these: amzn.to/2rChnKj Get one that you can calibrate to ensure that it's accurate. Fill a glass with ice and water. Let it sit for 3 or 4 minutes. Dip your thermometer in the water - it should read 32 deg F. If not, adjust it according to the directions so it's calibrated.

    • @sukumarpatra4199
      @sukumarpatra4199 7 лет назад

      Naomi Moore Sukumar.Patra 0504879854

    • @ninobrown555
      @ninobrown555 5 лет назад

      Naomi Moore I've got the same problem I got 2 other thermometers in there and all them read different the humidity is perfect but the temp is off out of 26 eggs only 6 hatched