Thanks Jeff, I just ordered one of these along with the Gladiator, so of course I pre-watched your assembly. Looks like a fun assembly. I liked the tape trick to remove the paint. Hard to believe a 1300 3S powers this big 4 motor plane. Love how scale it flew for you. Thats how I fly the Albatross, and its very enjoyable. I'll have to look on RCGroups for a mix walk-thru. Probably the same as my Albatross will work. This plane is a steal at $129.
Hey Monty...I probably will, however I have the spektrum DX8G2, not sure if this will help you, but hopefully it will, Stuart also said that he was gonna do a video as well for his radio, thanks for watching 👊🏼👊🏼👊🏼
nice video thanks :) how was it to fly? did it threaten to tipstall at any time? did it feel safe to fly? how easy was it to land? is it easy ti break propellers on landing? thanks
Hi...flys incredible with differential thrust and never indicated a tip stall, landing was nice as well with a slight flair before touching down, props are pretty rigid, so no worries there as well, really enjoyed flying this plane, thanks for watching 👊🏼👊🏼
Great Jeff, I'm doing mostly the same steps as you did. Did you remove the weight from the nose? Getting ready to put the Rx into mine now. Jeff in LA USA
Thanks for the Video - the build/quality is very poor for a V3 of this model - it really could have been designed better .. but as you say it is Aero Modelling and like you I really like doing these bits , its like investing in something - I have some that go together with a few screws but they don't give the joy of modelling.
Thanks so much, and yes...modeling is a great thing if you enjoy it as I do with most any model I purchase, always love adding my own touches that stand out from everyone else’s , thanks so much for watching 👊🏼👊🏼👊🏼
Thanks Jeff, I just ordered one of these along with the Gladiator, so of course I pre-watched your assembly. Looks like a fun assembly. I liked the tape trick to remove the paint. Hard to believe a 1300 3S powers this big 4 motor plane. Love how scale it flew for you. Thats how I fly the Albatross, and its very enjoyable. I'll have to look on RCGroups for a mix walk-thru. Probably the same as my Albatross will work. This plane is a steal at $129.
Flys really good with diff thrust 👊🏼
Informative and fun build video Jeff. Nice plane!
Thank you sir👍🏼👍🏼
Please share a video how you set up differential thrust on a Spektrum transmitter
amazing quality!! very nice!
Thanks Che’ , it’s a great model and flys fantastic, thanks for watching buddy👊🏼👊🏼👊🏼
For differential thrust, did the kit have all the wiring you needed. I would like to see how you have the diff thrust wired.
Yes it did Tom, plug and play as per manual, differential thrust was easy to set up with my spektrum DX 8Gen 2, pretty straight forward 👊🏼
a DX8 i am guessing will do the differential no problem , i am going to add some clear rudder extensions and try rudder also
Hi , yes I use a DX 8gen2 and it works great, rudder should be nice on this aircraft as well, best regards 👊🏼👊🏼
Awesome video Jeff , keep the good work goin my friend ...She sure looks pretty...👊👊👊👍🇬🇧
Thanks Sean...this plane flys amazing and looks so nice in the air, thanks for watching 👊🏼👊🏼👊🏼
nice vid. jeff. she looks pretty good . also you might try to center punch those canopy holes with a push pin to keep your drill bit from walking
Thanks Nathanial...great tip, that would work well, thanks for sharing👊🏼👊🏼
You going to show how you set the TX up ?
Hey Monty...I probably will, however I have the spektrum DX8G2, not sure if this will help you, but hopefully it will, Stuart also said that he was gonna do a video as well for his radio, thanks for watching 👊🏼👊🏼👊🏼
@@JeffsCustomRC yer I foolishly brought the ORX 10i 😀 I think I'm the only one
What gyro are you using
I’m using the admiral 600/gyro
@@JeffsCustomRC Thanks my friend. I need to get one and play around with it.
nice video thanks :)
how was it to fly? did it threaten to tipstall at any time? did it feel safe to fly? how easy was it to land? is it easy ti break propellers on landing?
thanks
Hi...flys incredible with differential thrust and never indicated a tip stall, landing was nice as well with a slight flair before touching down, props are pretty rigid, so no worries there as well, really enjoyed flying this plane, thanks for watching 👊🏼👊🏼
Super nice, only problem I have is I don't have much patience in putting these planes together my son says😎🇺🇸
Lol...and I love it, thanks for the support my friend👊🏼👊🏼
Great Jeff, I'm doing mostly the same steps as you did. Did you remove the weight from the nose? Getting ready to put the Rx into mine now. Jeff in LA USA
Jeff just watched your flight video again, will remove the weight. Thank you, Jeff in LA USA
Awesome, can’t wait to see a flight, best of luck 👊🏼👊🏼
I watched you do this for about 30 minutes and you amaze me with all the knowledge you have to share!! Very nice video.
Have you usef tbeextra weight provided?
Also does the manual indicate the right fitting of the props?
Thanks for the Video - the build/quality is very poor for a V3 of this model - it really could have been designed better .. but as you say it is Aero Modelling and like you I really like doing these bits , its like investing in something - I have some that go together with a few screws but they don't give the joy of modelling.
Thanks so much, and yes...modeling is a great thing if you enjoy it as I do with most any model I purchase, always love adding my own touches that stand out from everyone else’s , thanks so much for watching 👊🏼👊🏼👊🏼