I believe this video has helped you to fix your dstv problem. support the channel with a like , subscribe ,share and comment below. Thanks and god bless.
I am curious about having a modern HD decorder 9s (with no rf in and rf out) and i want to connect it to an old 4s with rf in and out. I am going to try the method you shower at the first part....but now how do i see the heartbeat. are both decorder compatible i wonder...
Hello mentor, i just wanted to ask this; do you use another signal cable running from say a universay twin lnb to the secondary decoder incase of model 5s en 4u, or the secondary decorder gets signal from the model 5s after establishing d heartbeat using the diplexer?
Sir thank you for everything, You are a good man and God sent, my now is, if I'm using explora 3 primary decoder and HD decoder can I still use the combiner?
Great video thanx. Can you make a video where you have 3 explora decoders. Explora 1 and explora ultra in 1 room and third explra decoder in another room. Thanx
please i have 2 HD DStv decoder 1 is model 5s and the other one is model 4s for Xtraview when it comes 2 to 4 minutes then da secondary decoder go off no picture but da primary still showing, am using two diplexers to connect it
I'm also stuck.i was trying to configure XtraView but the secondary decoder doesn't receive the heartbeat.Did you finally got the way out on how to do it???
Your decoder with RFIn/out is your primary... then use diplex connector to split the universal cable to the 2nd decoder... satellite to secondary decoder and
I understand everything so far, the sat input goes to the new decoder, where do i put the ant one, lnb or rf in/out on primary decoder? Also will the new decoder become primary one or will the old one still be primary one
VERY NICE TUTORIAL. PLEASE I WILLBE GRATEFUL IF YOU CAN SHOW US HOW TO CONNECT FTA RECEIVERS FOR EXTRAVIEW OR MULTIPLE VIEW USING MORE THAN TWO RECEIVERS SO THAT WE CAN GET SAME NUMBER OF CHANNEL AS THE RECEVERS. I LEARNT U HAVE TO DO SOME RF OUT TO RF IN and RF OUT TO RF IN then last RF OUT TO THE AMPLIFIER THE A SPLITTER but u have to do some frequency separating on each of the receivers Second question. can we extraview mixing DSTV and a FTA RECEIVER?
Something is not first you didn't mention what kind of lnb needs to be used and you are saying the other cable will go here which cable and according to your explanation the old decoder will stay without cable but thank you for your assistance
Twin smart lnb one cable go in to diplexer splitting through the old decoder and the other cable from the lnb goes in to the decoder so the new decoder will be primary this how I have done my one
Thanx Fokou, you are a great teacher, i've become an expert installer
Thank you your are welcome
I believe this video has helped you to fix your dstv problem. support the channel with a like , subscribe ,share and comment below. Thanks and god bless.
Can't really get what I wanted. I need infor for normal connecting cables with no smart.. Or multiplaxer
Thanks sir I understand your teaching
wow, nice, i just sacked my installer after watching this
Thank you so much. You don't know what you have done for me with this video
Good work sir........I really enjoy your tutorials.
Spot on thank you so much for this information this will work for clients who don't want to spend on smart LNB 👌
Thanks much for this explaining really appreciate ,but I need that satellite finder , please if possible
This video (information) was very helpful.
Thanks a lot 🙏🏼
So the heartbeat cable should be connected back to the first decoder??
So grate this man
i did the same thing but my secondary decoder cannot communicate with primary decoder what will be the problem
GOOD MASTER
That's well explained!
Good job
I am curious about having a modern HD decorder 9s (with no rf in and rf out) and i want to connect it to an old 4s with rf in and out. I am going to try the method you shower at the first part....but now how do i see the heartbeat. are both decorder compatible i wonder...
God bless you
Hello mentor, i just wanted to ask this; do you use another signal cable running from say a universay twin lnb to the secondary decoder incase of model 5s en 4u, or the secondary decorder gets signal from the model 5s after establishing d heartbeat using the diplexer?
does SAT go to the Dish or Decoder?
Sir thank you for everything, You are a good man and God sent, my now is, if I'm using explora 3 primary decoder and HD decoder can I still use the combiner?
U are so good even.i a notice understands wh a t to do I need you to answer a a uestion
HI, should i also do the same connection if i still have the dual LNB ( not Smart LNB) and 2 by 4 splitter?
Great video thanx. Can you make a video where you have 3 explora decoders. Explora 1 and explora ultra in 1 room and third explra decoder in another room. Thanx
please i have 2 HD DStv decoder 1 is model 5s and the other one is model 4s for Xtraview when it comes 2 to 4 minutes then da secondary decoder go off no picture but da primary still showing, am using two diplexers to connect it
Can I still connect HD PVR 1 with Explora 1 ,using DSTV Switch (5-2) for extra view
Thank you for this video. How do I use the Diplexer for twin lnb(not smart) and one Decoder with RF in/out then the other one with no RF ports?
I'm also stuck.i was trying to configure XtraView but the secondary decoder doesn't receive the heartbeat.Did you finally got the way out on how to do it???
Your decoder with RFIn/out is your primary... then use diplex connector to split the universal cable to the 2nd decoder... satellite to secondary decoder and
And cable to “RF IN” on primary decoder. Scan both decoders on universal cable and call DSTV to send the signal.
Remember ... no heartbeat is required when you are using the latest decoders and have a Smart LNB installed
I understand everything so far, the sat input goes to the new decoder, where do i put the ant one, lnb or rf in/out on primary decoder? Also will the new decoder become primary one or will the old one still be primary one
Thanks for the information can we connect 4s with 8s by this information
thanks 4 the video.how is quality?
I have explore 3A as primary and a small decoder model 6s. How can I connect for extra view? I have a smart LNB
What if your in a complex?
Can I use the diplexer to two decoders who has the RF In and out port already
Yes you can
How to install 2 5s decoders for extra view with one decoder at my shop because there I have a single view lnb and at my house I do have smart lnb?
can i use 4 way lnb for extra view?
i asked a question ooo. so what is ur response. Yes or No?
@@malikamissah9195 yes you can just ocupy the 2 ports and leave the other 2
What if secondary decoder have RF out and RF in but the primary decoder does not have rf out, how do you connect it for extra view? Thanks
in that case you will use only one diplexer, on the antenna you will run the heartbeat straight to the RF out on the secondary decoder
Thnks video on multi switches how to connect 2
How can you use 5s or 6s decoders to connect to 10 tvs showing different channels
Hi am struggling to connect hd 6s it keeps saying signal quality is poor what may be the problem
VERY NICE TUTORIAL. PLEASE I WILLBE GRATEFUL IF YOU CAN SHOW US HOW TO CONNECT FTA RECEIVERS FOR EXTRAVIEW OR MULTIPLE VIEW USING MORE THAN TWO RECEIVERS SO THAT WE CAN GET SAME NUMBER OF CHANNEL AS THE RECEVERS. I LEARNT U HAVE TO DO SOME RF OUT TO RF IN and RF OUT TO RF IN then last RF OUT TO THE AMPLIFIER THE A SPLITTER but u have to do some frequency separating on each of the receivers
Second question. can we extraview mixing DSTV and a FTA RECEIVER?
How do I connect a HD PVR 2P and HD5s model on extra view
Something is not first you didn't mention what kind of lnb needs to be used and you are saying the other cable will go here which cable and according to your explanation the old decoder will stay without cable but thank you for your assistance
Twin smart lnb one cable go in to diplexer splitting through the old decoder and the other cable from the lnb goes in to the decoder so the new decoder will be primary this how I have done my one
@@jamalijumapili2094 BUT WEN USING TWIN SMART LNB NO NEED FOR DIPLEXER
How to connect the first decoder to a tv again
How do I connect 1 dstv on 6 Tvs with 3 decorders with RF in and Out
2 Tvs per dercorder
How do I connect without diplexer
Pls do you have any WhatsApp group, cos I want to join and learn more