Great video all in all even with the interruptions. Especially liked your chat about how no one can say anything is this or that as everyone drives and does different things with their trucks and different batteries etc. nailed it brother. 👍💪👌
Exactly. The pinion issue at the end was caused by grit getting under and around the motor. It must open up when it lands with flex - stones then move alongside and under and around the mount - then it bends back and the stones are trapped and it slowly opens up the mesh. The hoenycomb pattern under the motor was compacted with grit. You wouldn’t think it could even get in there!! Going to plug it all with caulk. I can’t run any plastic drive shaft Arrma at this spot because the grit cuts through the middle drive shaft in about 3 minutes due to the same grit.
@@SnoriRC Grit has always caused issues with that truck. Servo was one from memory. Think they need to try and improve the body locking system as it seems to be flawed when the truck goes to the next level of jumps, higher etc. you should check out the cargo strap thing it really works well bud.
You are in the world of JP Bashed now with the extra height and yes as you say the harder landings start causing issues that were never issues in the past, like it coming unplugged all the time. Hey MIT it’s all good if you nail the landings though 😉 and yes we love the shell livery it pops.
@@SnoriRC Yea I commented a few videos back your ramp was shrinking ha ha. That ramp looks amazing to be fair. Shame about the BMX park that’s a decent location you have.
Nice ramp! launches the truck great👍 unfortunately I think it's true in my experience anyway you do have to pay to play Lucky I enjoy sending them and fixing them if it's silly little breakages 😂
Exactly! I’m the same. Although knowing the limits is wise but from what I’ve seen with this truck I should be ok. Need some thicker springs and fluids I think. 🤔
Hey buddy , Ive been looking at this ramp for some time they look awesome . Ive seen tons of videos on these . thats some commitment to the cause there brother out in the rain and rocking the DOG POO bags lol Stay awesome MIT brother #poobagfest24 #rainymitsnori #traxxasfanboy :)
Great ramp! Turns anywhere into a FUNZONE! Downside it cost a fortune - I had to pay another £50 import tax before Fed-ex would deliver. Reckon it came to nearly £300 all in. SURELY we can make these in the UK for less??? #orangetrainers #dogpoowaterproofs #expensiveramps #breakages
When I use foam internally I can barely get the shell on. I’ve used Velcro to secure the shell like I did on my XMaxx. It’s solid and doesn’t extend like bungee or dig in as much. HD shell - is that the Traxxas unpainted one?
Great video all in all even with the interruptions. Especially liked your chat about how no one can say anything is this or that as everyone drives and does different things with their trucks and different batteries etc. nailed it brother. 👍💪👌
Exactly. The pinion issue at the end was caused by grit getting under and around the motor. It must open up when it lands with flex - stones then move alongside and under and around the mount - then it bends back and the stones are trapped and it slowly opens up the mesh. The hoenycomb pattern under the motor was compacted with grit. You wouldn’t think it could even get in there!! Going to plug it all with caulk. I can’t run any plastic drive shaft Arrma at this spot because the grit cuts through the middle drive shaft in about 3 minutes due to the same grit.
@@SnoriRC Grit has always caused issues with that truck. Servo was one from memory. Think they need to try and improve the body locking system as it seems to be flawed when the truck goes to the next level of jumps, higher etc. you should check out the cargo strap thing it really works well bud.
That body is driving me nuts just watching you clip it back on every 2 seconds 😂😂😂
Same here! Velcro fix going on today. Cable tie the looper on and that should stop 80% of interruptions. 😡
You are in the world of JP Bashed now with the extra height and yes as you say the harder landings start causing issues that were never issues in the past, like it coming unplugged all the time. Hey MIT it’s all good if you nail the landings though 😉 and yes we love the shell livery it pops.
My sand ramp has shrunk recently and the National BMX track in Derby is good for height and jumps but you’re likely to get robbed whilst you’re there!
@@SnoriRC Yea I commented a few videos back your ramp was shrinking ha ha. That ramp looks amazing to be fair. Shame about the BMX park that’s a decent location you have.
Not as easy as it looks hitting a ramp. Some great air and some interesting jumps when it didn’t catch it correctly.
Craig’s crash and bash uses a bungie strap to hold the body on. Works a treat 😉
His maxx looks like something from “Scrap Heap Challenge” 🏴
@@SnoriRC That’s because he has hammered it and bashed the crap out of it. Body doesnt come off though 😂🤷♂️
@@JPBashed Yeah - I’ll be using Velcro like on the XMaxx. I’ll leave Craig with his bungee cord. 🏴
@@SnoriRC Lol well time will tell if that works fingers crossed. 🤞
thats cool!
Great ramp!!
Oh hell yea a ramp, only 30 seconds in and shit just got interesting 😊
Nice ramp! launches the truck great👍 unfortunately I think it's true in my experience anyway you do have to pay to play Lucky I enjoy sending them and fixing them if it's silly little breakages 😂
Exactly! I’m the same. Although knowing the limits is wise but from what I’ve seen with this truck I should be ok. Need some thicker springs and fluids I think. 🤔
For your skid plates, get 12mm screws to replace the 10mm..they won’t come out again
Thanks dude!! I’ll try that. 🎉
Hey buddy , Ive been looking at this ramp for some time they look awesome . Ive seen tons of videos on these .
thats some commitment to the cause there brother out in the rain and rocking the DOG POO bags lol
Stay awesome MIT brother #poobagfest24 #rainymitsnori #traxxasfanboy :)
Great ramp! Turns anywhere into a FUNZONE! Downside it cost a fortune - I had to pay another £50 import tax before Fed-ex would deliver. Reckon it came to nearly £300 all in. SURELY we can make these in the UK for less???
#orangetrainers #dogpoowaterproofs
#expensiveramps #breakages
I just got the HD shell, much stronger, put some foam to soften the blow on the shock towers and use bungee cord to hold the shell on ...
When I use foam internally I can barely get the shell on. I’ve used Velcro to secure the shell like I did on my XMaxx. It’s solid and doesn’t extend like bungee or dig in as much. HD shell - is that the Traxxas unpainted one?
🤔
🙃