@@Konkorolp the turbine is nowhere near choking at all. Should have reduced the size by half then go up till it doesn't choke. It might have heaps more low down boost to give
Also this big ass exhaust making this thing making less torque and too high compression is good for fuel efficiency and bad with turbos I guess you can make around 4500 HP with this big 6line engine
@@someweeb3650 ya well even methanol cant run with static compression that high on a piston… you are definetly a keyboard warrior😂 lets get real here this is a video game the parameters that you can go to far exceed 🤣
@@heathkill4821 Methanol REALLY likes high compression. Typical Methanol race engines run at 16:1 CR. Although Methanol turbo charged applications with high compressions are less common (as it truly is easier going with low compression and letting boost care of the rest), they do exist and present a usage case; IE scenarios where one would have to use a smaller methanol injected engine, but would like to spool a larger framed turbo faster. Compression ratios of north of 14.5-15.0:1 aren't unheard of for turbo charged applications. Less prevalent, but not unheard of. Besides, when you are using methanol, its not the piston you are worried about. Why would the piston be of concern in particularly high CR setups, the whole point of methanol (aside from its charge cooling effect and the oxygen it carries) is its high octane compared to gasoline, which PROTECTS the piston under the conditions you are speaking of. *scratches head* keyboard warrior.
@@V3R71GO this dude is playing a video game dumbass and the build he made was immpossible end of story… and you call me a keyboard warrior😂 your the dumbass🤣 nothing will suvive on extreme compression with that kind of build… but keep in mind this is a video game so unreal physics is possible
Great video! 4 valves per cylinder VVL wouldn't yield more than 5 valves per cylinder? BTW in my opinion the exporter uses the older (4.2.12) calculation method for turbo engines. When the 4.2.13 has released few days ago I could slightly modify my turbo engines which meant few more kw and Nm. Yet when I exported the cars to Beamng (changed the names so the 4.2.12 versions remained) they don't have more power and torque.
I don’t think VVL would add power, the maximum amount of air you can put in the engine would be with 5 valves and more air means more power VVL would help with that torque curve however
currently the Automation version I got on Steam (LCV4.2.13 Open Alpha) has no VGT that I can see, and V8's only have twin fixed geometry turbos. sadge.
I'll go back to beamNG when it becomes more precise. It's frustrating to recreate a real engine as close as possible and end up with something so different.
When I play this game.. I do not have the options for the balance shaft, valve and spring options, or the variable turbo or the cool headers before the turbo... am I missing a feature? or is it an add on feature? Thanks
i am not able to hit even over a thousand horsepower, is there something i'm missing? is there anything i have to install or mod before i can achieve higher numbers?
5:50 ..aaaand slowly release the clutch
Please put this in a vehicle in beamng! Or put all of your no stress engines in an endurance test that’s also a race
He did around 3:40
24 Hours of Le Mans style?
@@AmaroqStarwind The engine barely lasted a minute though
Make the turbine housing smaller and it will boost earlier
It's gonna overheat faster
@@Konkorolp the turbine is nowhere near choking at all. Should have reduced the size by half then go up till it doesn't choke. It might have heaps more low down boost to give
Also this big ass exhaust making this thing making less torque
and too high compression is good for fuel efficiency and bad with turbos
I guess you can make around 4500 HP with this big 6line engine
Reject modernity. Embrace turbo lag.
Trust me bro, you have the voice that's gonna take you far. Keep it up, great video, subbed!
King of the hill ahh voice
Stock 2JZ, yes.
*Stock Ford Barra
A Barra
@@jrburger95lmao that’s so true.
Barra better then 2JZ
No shit
I've never seen that curve in a graph before, you're definetely the cheff! 🍳🔥
Jeez this thing sounds like my vacuum cleaner
You know why cant cars from car mechanic simulator sound this good.
Every time you use magnesium I cry. Everyone who knows engines knows magnesium is flammable af under boost. It’s just not realistic
well no crap this entire build is unrealistic
@@leafext fr
Clicked this thinking the thumbnail was a real engine! Hahahaha
This reminds me of those engines that go up the Moreeb Dune in the UAE, except those engines are pushed to within a inch of their lives 🤣
Almost 3000 nm of torque insane :-D
That much compression with any boost would be instant kaboom for sure
Not with methanol.
@@someweeb3650 ya well even methanol cant run with static compression that high on a piston… you are definetly a keyboard warrior😂 lets get real here this is a video game the parameters that you can go to far exceed 🤣
@@heathkill4821 Methanol REALLY likes high compression. Typical Methanol race engines run at 16:1 CR. Although Methanol turbo charged applications with high compressions are less common (as it truly is easier going with low compression and letting boost care of the rest), they do exist and present a usage case; IE scenarios where one would have to use a smaller methanol injected engine, but would like to spool a larger framed turbo faster. Compression ratios of north of 14.5-15.0:1 aren't unheard of for turbo charged applications. Less prevalent, but not unheard of.
Besides, when you are using methanol, its not the piston you are worried about. Why would the piston be of concern in particularly high CR setups, the whole point of methanol (aside from its charge cooling effect and the oxygen it carries) is its high octane compared to gasoline, which PROTECTS the piston under the conditions you are speaking of.
*scratches head*
keyboard warrior.
@@V3R71GO this dude is playing a video game dumbass and the build he made was immpossible end of story… and you call me a keyboard warrior😂 your the dumbass🤣 nothing will suvive on extreme compression with that kind of build… but keep in mind this is a video game so unreal physics is possible
@@V3R71GO you shut him up lol
No spark knock at 100 degrees timing on 30 psi 😂😂😂 that’s realistic
The real thing to point out is that it's 10.4:1 on methanol, which is stoichiometric at 6.5:1.
Use a small pre-turbo to feed your laggy monster turbo.
Great video! 4 valves per cylinder VVL wouldn't yield more than 5 valves per cylinder? BTW in my opinion the exporter uses the older (4.2.12) calculation method for turbo engines. When the 4.2.13 has released few days ago I could slightly modify my turbo engines which meant few more kw and Nm. Yet when I exported the cars to Beamng (changed the names so the 4.2.12 versions remained) they don't have more power and torque.
I don’t think VVL would add power, the maximum amount of air you can put in the engine would be with 5 valves and more air means more power
VVL would help with that torque curve however
TRIZE , Para cuando el motor diesel 6 cilindros más potente ?
Wait, is this for BeamNG?! I thought it was a fun engine game to mess with 😭
@@recon1673 it's a tycoon game, but it has the power to export to beam too
@@dingo-gorditas Ooo me likey
The revs were gold👏
Why am I chosen, this video has been recommended for me and I can’t wait to see more
i can imagine myself cooking some bacon around that exhaust header😋
currently the Automation version I got on Steam (LCV4.2.13 Open Alpha) has no VGT that I can see, and V8's only have twin fixed geometry turbos. sadge.
I used a similar set up to that and managed to get 7200 hp with the new methanol
How do you have all those options for the turbo
I'll go back to beamNG when it becomes more precise. It's frustrating to recreate a real engine as close as possible and end up with something so different.
And 3.6k aint close to forgotten mustard's 13k hp engine (no hate)
Love the vids
Thanks!
@@TRIZEGames I am ajgaming with a new name btw
144 cu in (2.4 L) Falcon Six I6 with a diesel compression
Or a Bara. Can't go wrong with a Bara XD
144 cu in (2.4 L) Falcon Six I6 with a 1.2 :1 compression
Dam it sounds like 4000hp 2JZ
damn we got the stock skyline and supra motor
Stock Ford Motor actually bruh
Pft. Obviously should’ve used graphene carbon nanotubes for the con rods and pistons. Then give it a 4 foot stroke.
This is so cool
a 10km cruise would rise global temperature by 20 degress pron haha
*
When did all these new options get put in? I didn't have half those options the last time I played.
@Jalopezlag how?
bruh it sounds like a jet engine lmaooo
holy shit look at that turbo lag its gonna be undriveable like holy fuc
Seemed like a lotta stress
Not bad for a daily cruiser
When I play this game.. I do not have the options for the balance shaft, valve and spring options, or the variable turbo or the cool headers before the turbo... am I missing a feature? or is it an add on feature? Thanks
Same
@@thelordemi2916
Wonder why... New update.. or missing a mod or something
@@kens97sto171 I found out why you have to enroll in the beta search up a video of it
@@thelordemi2916
Thanks I'll look into that.. much appreciated.
What’s the game
this is stupid but great but forgotten mustard is stuppider but even greater
that idle tho
at this point just put an jet engine in the back of the car
I need this in place of my 4.0l i6 irl
Bro sounds like Peter griffen
do you think you could do the highest hp per lb of engine weight
Imma put this in a lawnmower
the turbo lag AAAUUUUGHHH
Supra: hold my 2J
Kid
Ford: hold my barra
Nissan TB48DE... am i a joke to you?
Ok _holds 2J_
Now give it a shot Mr Supra :P
Least powerful Cummins engine
2jz 3,600hp oml(I’m am just fine nothing else)
You made a Barra
How 13 years old think 2jzs come from factory?
what 12 yearolds think the 2jz is like stock
im just confused as to how your automation looks that since mine doesn't have some of those options
wait the engine is twice as what?
I need some of this in my tanks
what 12 year olds think a stock 2jz is like
the idle 🥵
Will it fit in my Miata?
probably
What's its PSC?
When will we get supperchargers
i am not able to hit even over a thousand horsepower, is there something i'm missing? is there anything i have to install or mod before i can achieve higher numbers?
can you make this a engine mod for every vehicle?
Why doesn't this work on my version automation?
my automation doesnt have the same settings as you?
twice as what compared to a 2jz? Cmonbruh
How much lag does it have ?
- yes
how do i like shift it while testing the engine???
2JZ engine be like
I am new at this game. Is a sandbox or you need game money to buy the things?
Both, but I think no one plays something else than sandbox.
My game looks totally different with much less options. Why is that? I have the newest steam version.
whats the game called
Barra owners be like
I somehow made a 1800 hp 12 liter v12 with 4 turbos NO stress...
I do have a 4.9 v8 n/a engine, making 1000hp.
tu je zi powahhh
Granted, it is a game but is there any real world applications for this?
No, its straight up bs and would never work whatsoever
Why i dont have this in my Automation tycoon game
What mods are you using?
Next time use cast iron block
U built a ford Barra motor
Hmmm Barraaaaaaar…
Can you make a Honda engine
2jz be like
What game is this?
Is this game free on steam ?
I cant Istal 2 turbos whyyyyyyyy plz help
2JZ POWAAAAAAAAAAAAAAAA
Why does it idle like a Subaru though lol
Those headers weren’t red they were white hot Jesus lmaoo
Is there a way to measure header temp under WOT
2jz and rb26
but whait this engine is iligal
2jz?
Due a 2 rotar rotary
Toyota supra: ThAt's CuTe!
Can u do truck
Which game?
Automation
If there was a boxer engine he should do the most powerful boxer engine
Rx7🤰🏻Supra 🙎🏻♂️👩❤️👨 = SUPER ENGİNE
super turbo lag😂😂
Game name ??
Automation
*i made a v16 11k hp*
game name please?
Automation - The car company game
Only in PC
that a b serie l6 lol VTEC POWER LOL
So not a reasonable engine by all means...