1. Any and all comments are welcome. 2. I've always provided very detailed personal replies to questions asking for advice on materials, methods, or even what to buy for a first-time knife owner, etc, with the result more often than not resulting in not so much as a "thank you". So, that ship has sailed. Those sorts of questions will now be addressed on my Patreon Page. www.patreon.com/c/KnifetimeStory. 3. If your goal is to be a PITA or Troll or Karen or Chad or simply just a general Jack A$$, give it your best shot because you won't get a second attempt. 4. Spelling, punctuation, and capitalization count. Think I'm joking? Try me.
Bought my first 110 in 1979 and carried on my belt all through high school if you can believe that and even had teachers borrow in for simple classroom tasks. Today carrying a Buck 110 in class would have the SWAT team on you and you would get arrested. How times have changed. We have become pussies.
@@joelhunter984I think it depends on where you grew up at . I carried a pocket knife everyday in high school in the late 90’s but I lived in a rural area .
This vid came across my feed. It brought back memories of me and my father back when things were simpler. He bought 2 110's at JCPenney in 1973, one for him and one for me. In 1978 he bought me a 118 for a graduation gift.In the early 90's i bought each of us a V52 selector in safety orange with several styles of blades. I still use the 118 and V52 ti this day. The 110's I passed to my eldest daughter. Thanks for the info on these 110's.
I bought my first 110 in 1971 while in the Army. It was taken from me in New Orleans during Mardi Gras. Didn’t know or think about having it on. Since then I have bought about 35 110’s and 112’s. I pick one up every time a new blade steel is presented. I have some nice custom sheaths for them.
I’m active duty (infantry) and carry a 110 every day. I’ve tried a ton of knives but nothing is quite as practical, dependable, or trustworthy as a 110.
I bought my 12 yr old boy a 110. We killed a deer hunting together. I had him use the 110 when we gutted the deer. He somehow left the knife by the gut pile. We didn’t realize it was missing until we were driving home. It snowed about 4 inches that night. Two weeks later I went back for the knife expecting it to be a rusty swollen mess. I found it, cleaned the fat and goo off and it was like new. That was 16 yrs and many deer ago. I think I paid around $27 for that knife. Great product!
I have had w few Buck 110’s since 1978 in the Navy. A 110 knife, a 110 hammer, a 110 screwdriver, a 110 prybar and a 110 eating utensil. Of course they’re all the same item. Beat up, scared, well used and still carried.
i've become a 'buck' guy gradually over time but am now firmly in the corner of Buck as being one of the essential components of a well configured knife collection. I've got a special appreciation for lock back knives in general. The 110 is a bit large for me to carry regularly - people's eyes pop a bit when I pull out the 110 to slice that apple or open that box. I've been using the 112 Ranger more regularly. I also rotate between the 112 Range Prr Sport ( maybe the quintessential non flipping EDC in my estimation) and my nickel plated , drop point custom 112. I have a 110 Pro Spotr Pro also. Overall the Sport models are my favorites but there will always be a soft spot in my pocket for the traditional 110 and 112. Lastly, you are quite entertaining as well as informative.... I'm signing on! Thanks.
Finally, someone shares some secrets about really caring for a Buck 110! Anyone can slap a knife into a pouch, but that same knife will be just a beater in short order. Good video Tom!
Fun and instructive Buck 110 video. As a collector I will say the less done to modify a Buck production line knife, like a 1981 or earlier, is better. As for a working knife; hunting, woods carry, welding/machine shop knife, go on and personalize that beater all you want. Sadly, inflation bites everyone in the A$$. In 1964 a Buck 110 cost about $10. Thumbs up and subscribed.
I agree with the modification thing. I modded my 1981 for use and have used it a lot. Carved a couple wood sculptures and field dressed an "S" load of Pigeons throughout the years. I live on a farm and those flying rats are an issue, but, I have dogs that eat them. So, it's a win win.
I have one of the rarest of the Buck 110's the Auto model from the 1970's, few people have ever seen one. It's a beautiful knife even with the oxidation on the Brass. It is now worth $300.00 much to my amazement, it is still in excellent condition including the leather holster case. I use the new model, D2 G10 Buck 110 Folding Hunter. Somewhat less expensive , not by much though. Enjoyed watching this video, as a lot of people don't take care of their knives.
Really good tips about: 1. Looking for one in a display case/box instead of a blister pack (so you can check the quality). 2. Proper way to fit the knife into the leather sheath for a good long-term fit. 3. The aspects of the knife to check for quality before buying. Thanks so much!
I appreciate you giving some details about the Buck 110. I plan to get one someday because it is hailed as such a classic, but it's good to know these pointers before I buy. My "Wishlist" is so damn long (and they keep making new cool knives), so I never make it down to the Buck 110. I have to check your site, but it would also be nice to watch a video of the pros/cons of different Buck folders that are in the same family (e.g. 110, 112, etc.). Sorry if you've already made this video - I will double check. Thanks
I have not done one on the 112. Had one years ago and after carrying the 110 for so long, the 112 just seemed too small. When in reality it isn't. But, the balance and feel of the 110 is what feels best in my hand.
While stationed at Ft. Benning (now Ft. Moore) back in 2002, I found a Buck 112, (100 years (1902-2002) of Buck knives special edition), at a shoppette mismarked for $19.99. I don't think the cashier even knew. This was before AAFES used UPC bar codes on everything, it had a little sticker with the price printed on it. It was a bargain then as it should have been $50-70 if my memory serves me. I still have it.
My early 1970's Buck 110, purchased at A10 sporting goods, was used and carried into the 2000's. I left my Jeep in the driveway one night, and someone broke in and stole that knife. That theft gave me a new perspective on crime and punishment.
I have replied to this comment 3 times now. They never show up. Sorry to hear yours was stolen. I hope the perpetrator is haunted by a lifetime of bad karma.
Posted my Buck collection over view vid today, rounding all of them up made me realize that I too, may have a problem.......A great problem to have though!
Thanks for watching and commenting. Among the problems in the world to have, I guess we share a healthy one. BTW, I watched your video. Great tour and commentary. If people want to see Bucks you rarely ever hear about or see, it is definitely the video to watch!!
Look, you must be super critical. I own 2 112s and 5 110s all of them have a blade right down the middle and one of the most beautiful sounds in the world (it’s like a wooden bat hitting a baseball) is a Buck knife locking into place. It’s solid and you know it’s locked. You can trust a Buck knife.
No doubt I'm super anal about knives, which can be interpreted as critical I suppose. But I also admit that in lots of videos. My goal is to maybe save my fellow AR people (anal retentive) from possible disappointment in a Buck 110 purchase. And...yes, that sound is beautiful.
You made me laugh out loud twice, Tom. You also made me remember my first 110. You always remember your first, eh?😂 anyhow, I knocked the tip off and ground it down to a modified sheep’s foot which I carried throughout high school. Yeah, I’m old too. It might be nice to get a new 110. I really appreciate the information on knives that you share. Thank you.
Glad you got a couple good chuckles. I simply turn on the camera and hope for the best. Treat yourself to a new 110, it's fun!!! Just don't go to your HS reunion with it. Sadly our days of knives and innocence have ended.
@ I think I might just treat myself. Oh, wait, I’d need to get authorization from my better half. She’s already giving me the stink eye over the TM1 I just got. If I never hear, “why do you need another knife”ever again, it’ll be too soon.
20 дней назад+1
@@dw8143 I always reply, "Why do you buy more shoes?" Some of which are more than my knives.
Be careful with those "spa" treatments. Sometimes they get a little carried away with polishing and sharpening and you get a knife that has a significantly smaller blade and thinner handles and misshaped handles because they polished and polished and polished and polished and well, you know...polished.
Pretty sure I paid 27.00 $ back in 97 for my first Buck 110 . A few more models and I’ll have all the 110’s Buck makes short of the custom shop models . My only complaint is QC varies from model to model . My favorite is the Buck 110 LT . It’s nice and light like the slim selects but you get the full handle .
I'd love to have a 110LT. But, I have yet to find one that had a decent lock up. I realize that finding one that is perfect is probably not going to happen, but I'd like it to be at least decent. When I do find one, I'll be all over it.
@@knifetimestory You're not wrong. Most 110LT's that I've handled hand sloppy lock up. Lots of up/down play. Too bad. It's a good design but sloppy execution.
Bought my first Buck 110 & 112 ranger in 1973’. I honestly doubt a Roughneck on the construction site. Or a seasoned Hunter would care much about the itty bitty when it comes to the Buck 110. They are built like a tank. I have never ran across an old or New 110 that didn’t lock up as tight as a Springfield 06. Not the best all purpose Hunting/Skinning knife. But a true classic
You are very correct. I just happen to be very anal about knives and actually don't mind modding or repairing or tuning up to make them perfect. Not everyone who is anal though, has the gear to do what I do, so I figure I'll put out the info on things to look out for and maybe save them a little disappointment. Other than that, yep, the average guy buying a Buck 110 could not care less, as long as the knife does it's job!!!
Absolutely correct. But, it's nice to have the 110 as a backup just in case!
20 дней назад
Thanks for the video, good info on Buck knives. My 110 has finger grooves and a inverted V behind the 110 is that a certain year or part of the model no.? It also came with a brown leather sheath with Buck 110 marking and snap. I also have the 112 but I can't remember why I bought it?
Let me tell you a little secret that could have saved you a lot of money. I was talking knives with a neighbor who is a famous custom (both fixed and folding) knife maker about my 110 which at that time was about 22 years old that the blade would slightly move under pressure when really bearing down when cutting. He said that was unacceptable and to return to Buck for repairs. It came back as an “11!”
Tom, nice to see this PSA for the Buck 110 curious. Kinky. You've got good colour in the cheeks but to the trained eye, are obviously hanging by a thread. Christmas can do that to you, to say nothing of the abundance of fresh air and lack of erudite conversation you're at risk of, living where you do. Don't forget to supplement! I had hoped as part of this soft sell, you might have been a bit more of an apologist for the format in this day and age. I get the history, the iconic-ness of it all but....I'm both charmed and repulsed. I DO want one...maybe...Something about the weight; it's an utter pig on the belt and the steel that always needs an apology appended to its declaration gives me pause. Obviously the hard men of yore were stronger than the moisturized cupcakes of today. Shooting off hand to take a deer at 800 yards, getting the corn in the ground and raising a barn for the neighbours...all before lunch. The change in the men notwithstanding, there are some real stunners these days in the world of knives; perfectly poised at the Venn diagram intersection of weight, $$ and performance. Picking up a Spyderco Native with FRN handles after the Buck and I feel like Luke Skywalker using the lightsaber (WITH the Force). The clerk beside me is at risk of being cleaved in two! As always appreciate the thoughts from the deep well and rich inner life you've curated. ;)
Wow. Thank you for your comment. I read the first part to my wife and she was touched that you mentioned my lack of healthy appearance, and then shared with me that some of the folks at church have approached her and said something. I've been to the doctor, had all the tests and blood work, and I am fit as a fiddle according to the results. I've lost about 40 pounds since we moved here in 2022. I don't have a zest for eating like I used to and since I was not overweight to begin with, 40 pounds can really show. I'm now making a concerted effort to eat regularly. Your honesty and concern are truly appreciated. Aside from that, I'm glad you enjoyed the video. I very much enjoy your comments with a fun and creative command of the English language. Very refreshing!!!
I bought one and was very disappointed. The brass wasn't polished at all. It makes me think of what other mistakes they made while making my knife. 😐😐😐
To find a good 110 you must buy at least 30 pieces . Maybe you get lucky to find a well centered one with a good lock up . I have bought around 5 so far, they are all garbage .
I kinda allude to that in the video when I say that finding a good one did not just happen. I gradually kept finding one better than the previous, until I finally, after at least 10, found the Unicorn.
Buck 110 is great. The sheath that is made in Mexico is poor. Cheap quality leather and the belt loop on it is not stitched but attached by a rivet that's going to fail. Buck might as well sell the knife without any sheath. Just don't sell me a classic American knife with a junky Mexican sheath.
You are right and wrong. The sheath is made in Mexico. It is sewn, not riveted. Never been riveted. And that is why I tell you to buy them in a box so that you can inspect the sheath and see that you’re getting a nice thick piece of leather in all of the important places.
1. Any and all comments are welcome.
2. I've always provided very detailed personal replies to questions asking for advice on materials, methods, or even what to buy for a first-time knife owner, etc, with the result more often than not resulting in not so much as a "thank you". So, that ship has sailed. Those sorts of questions will now be addressed on my Patreon Page. www.patreon.com/c/KnifetimeStory.
3. If your goal is to be a PITA or Troll or Karen or Chad or simply just a general Jack A$$, give it your best shot because you won't get a second attempt.
4. Spelling, punctuation, and capitalization count. Think I'm joking? Try me.
My brother and I have always carried Buck 110s. Now, I'm a proud owner of a 110 auto elite!
Cool. I'll have to try an Auto someday.
Bought my first 110 in 1979 and carried on my belt all through high school if you can believe that and even had teachers borrow in for simple classroom tasks. Today carrying a Buck 110 in class would have the SWAT team on you and you would get arrested. How times have changed. We have become pussies.
Same. Even some teachers wore a 110. Back then it was unfashionable not to.
@@kirbycreekmo Crazy how far we have declined
You are totally exaggerating
@@michaelbrown8619 Really? Very little exaggerating. I ran a SWAT team for 14 years.
@@joelhunter984I think it depends on where you grew up at . I carried a pocket knife everyday in high school in the late 90’s but I lived in a rural area .
I bought my first Buck today. 112 😊 great video, greetings from Poland
Greetings to Poland. Thank you. Great news on the purchase. I hope it is all you were hoping for and gives you a lifetime of joy and reliable use.
This vid came across my feed. It brought back memories of me and my father back when things were simpler. He bought 2 110's at JCPenney in 1973, one for him and one for me. In 1978 he bought me a 118 for a graduation gift.In the early 90's i bought each of us a V52 selector in safety orange with several styles of blades. I still use the 118 and V52 ti this day. The 110's I passed to my eldest daughter.
Thanks for the info on these 110's.
Great comment. I love stories like that. Makes my day!! Glad you daughter appreciates that sort of thing. That is cool!!!
Always good to have an extra or two!!
I bought my first 110 in 1971 while in the Army. It was taken from me in New Orleans during Mardi Gras. Didn’t know or think about having it on. Since then I have bought about 35 110’s and 112’s. I pick one up every time a new blade steel is presented. I have some nice custom sheaths for them.
Bummer about the first one. That sucks.
I’m active duty (infantry) and carry a 110 every day. I’ve tried a ton of knives but nothing is quite as practical, dependable, or trustworthy as a 110.
I bought my 12 yr old boy a 110. We killed a deer hunting together. I had him use the 110 when we gutted the deer. He somehow left the knife by the gut pile. We didn’t realize it was missing until we were driving home. It snowed about 4 inches that night.
Two weeks later I went back for the knife expecting it to be a rusty swollen mess. I found it, cleaned the fat and goo off and it was like new.
That was 16 yrs and many deer ago. I think I paid around $27
for that knife. Great product!
That is an awesome story. I love hearing stuff like that!
I have had w few Buck 110’s since 1978 in the Navy. A 110 knife, a 110 hammer, a 110 screwdriver, a 110 prybar and a 110 eating utensil. Of course they’re all the same item. Beat up, scared, well used and still carried.
Great comment. Hope Buck does not read it though...your warranty has been denied. 🤣
LOL! Who cares? I’ll get another and start a collection like you got!
Thank you for your vid
👍 Sounds Good!!
i've become a 'buck' guy gradually over time but am now firmly in the corner of Buck as being one of the essential components of a well configured knife collection. I've got a special appreciation for lock back knives in general. The 110 is a bit large for me to carry regularly - people's eyes pop a bit when I pull out the 110 to slice that apple or open that box. I've been using the 112 Ranger more regularly. I also rotate between the 112 Range Prr Sport ( maybe the quintessential non flipping EDC in my estimation) and my nickel plated , drop point custom 112. I have a 110 Pro Spotr Pro also. Overall the Sport models are my favorites but there will always be a soft spot in my pocket for the traditional 110 and 112. Lastly, you are quite entertaining as well as informative.... I'm signing on! Thanks.
Thanks for sharing your thoughts! It's always fun to find fellow knife enthusiasts out there. Also, thank you for the kind words of encouragement!!
Finally, someone shares some secrets about really caring for a Buck 110! Anyone can slap a knife into a pouch, but that same knife will be just a beater in short order. Good video Tom!
Thank you my friend. I appreciate positive supportive comment.
Hi dad got me a buck 110 for my eighth grade graduation. I had three boys and got them the same or eighth grade. A true American tradition!
That's awesome! The Buck 110 is a classic knife and a great gift for graduation. It sounds like you're passing on a wonderful tradition to your boys!
Used to be $50 in Canada, now $100 and $150 for the S30V. Thanks for the tips.
Sorry about the crazy prices.
Fun and instructive Buck 110 video. As a collector I will say the less done to modify a Buck production line knife, like a 1981 or earlier, is better. As for a working knife; hunting, woods carry, welding/machine shop knife, go on and personalize that beater all you want. Sadly, inflation bites everyone in the A$$. In 1964 a Buck 110 cost about $10. Thumbs up and subscribed.
I agree with the modification thing. I modded my 1981 for use and have used it a lot. Carved a couple wood sculptures and field dressed an "S" load of Pigeons throughout the years. I live on a farm and those flying rats are an issue, but, I have dogs that eat them. So, it's a win win.
I did a video once showing how to form fit a Buck 110 sheeths.
Thanks for showing✌
Cool. I'll have to check it out.
I have one of the rarest of the Buck 110's the Auto model from the 1970's,
few people have ever seen one. It's a beautiful knife even with the oxidation on the Brass. It is now worth $300.00 much to my amazement, it is still in excellent condition including the leather holster case.
I use the new model, D2 G10 Buck 110 Folding Hunter. Somewhat less expensive , not by much though.
Enjoyed watching this video, as a lot of people don't take care of their knives.
I bet that thing was expensive back in the day. Glad you have one. Thanks for sharing. Wish I could see a picture of it.
I like these Buck videos. It's a classic blade and deserves all the same care and attention of any folding knife out there. Well done, Tom!
Thank you very much my friend!!!
Really good tips about: 1. Looking for one in a display case/box instead of a blister pack (so you can check the quality). 2. Proper way to fit the knife into the leather sheath for a good long-term fit. 3. The aspects of the knife to check for quality before buying. Thanks so much!
Thanks for the encouraging words!!
I appreciate you giving some details about the Buck 110. I plan to get one someday because it is hailed as such a classic, but it's good to know these pointers before I buy. My "Wishlist" is so damn long (and they keep making new cool knives), so I never make it down to the Buck 110. I have to check your site, but it would also be nice to watch a video of the pros/cons of different Buck folders that are in the same family (e.g. 110, 112, etc.). Sorry if you've already made this video - I will double check. Thanks
I have not done one on the 112. Had one years ago and after carrying the 110 for so long, the 112 just seemed too small. When in reality it isn't. But, the balance and feel of the 110 is what feels best in my hand.
While stationed at Ft. Benning (now Ft. Moore) back in 2002, I found a Buck 112, (100 years (1902-2002) of Buck knives special edition), at a shoppette mismarked for $19.99. I don't think the cashier even knew. This was before AAFES used UPC bar codes on everything, it had a little sticker with the price printed on it. It was a bargain then as it should have been $50-70 if my memory serves me. I still have it.
You got a steal! Great story!!
My early 1970's Buck 110, purchased at A10 sporting goods, was used and carried into the 2000's. I left my Jeep in the driveway one night, and someone broke in and stole that knife. That theft gave me a new perspective on crime and punishment.
I have replied to this comment 3 times now. They never show up.
Sorry to hear yours was stolen. I hope the perpetrator is haunted by a lifetime of bad karma.
I have 3 conversion 110 autos and love them.
2 open auto only and one can be by hand or auto.
Never had one. If I ever come across one in person, I'll check it out.
Posted my Buck collection over view vid today, rounding all of them up made me realize that I too, may have a problem.......A great problem to have though!
Thanks for watching and commenting. Among the problems in the world to have, I guess we share a healthy one.
BTW, I watched your video. Great tour and commentary. If people want to see Bucks you rarely ever hear about or see, it is definitely the video to watch!!
Look, you must be super critical. I own 2 112s and 5 110s all of them have a blade right down the middle and one of the most beautiful sounds in the world (it’s like a wooden bat hitting a baseball) is a Buck knife locking into place. It’s solid and you know it’s locked. You can trust a Buck knife.
No doubt I'm super anal about knives, which can be interpreted as critical I suppose. But I also admit that in lots of videos. My goal is to maybe save my fellow AR people (anal retentive) from possible disappointment in a Buck 110 purchase.
And...yes, that sound is beautiful.
You made me laugh out loud twice, Tom. You also made me remember my first 110. You always remember your first, eh?😂 anyhow, I knocked the tip off and ground it down to a modified sheep’s foot which I carried throughout high school. Yeah, I’m old too. It might be nice to get a new 110. I really appreciate the information on knives that you share. Thank you.
Glad you got a couple good chuckles. I simply turn on the camera and hope for the best.
Treat yourself to a new 110, it's fun!!! Just don't go to your HS reunion with it. Sadly our days of knives and innocence have ended.
@ I think I might just treat myself. Oh, wait, I’d need to get authorization from my better half. She’s already giving me the stink eye over the TM1 I just got. If I never hear, “why do you need another knife”ever again, it’ll be too soon.
@@dw8143 I always reply, "Why do you buy more shoes?" Some of which are more than my knives.
I was about to mention the shoe thing.
All Buck 110’s are bad ass awesome. Especially the ones used by guys that use them all over the place.
Well put. I like that. Thank you for sharing that thought!!
BIG thank you! Lots of great info, some of which , I didn’t know.
BIG Your Welcome. Glad you found it useful. Thanks for taking the time to let me know.
Great advice. No bigger bummer than a wobbly 110. Thank you for the Buck 110 content 🎉
Thank you for watching and commenting. I appreciate both very much and glad you agree about the wobble.
I've had one Buck 110 since 1993 that my parents bought me for my 21st birthday. Still works fine.
Your parents were very cool!
Got a 1987 at a pawn shop for 40$ sent it in for spa service from buck came back with a razor sharp edge and still spent less than a new one
Be careful with those "spa" treatments. Sometimes they get a little carried away with polishing and sharpening and you get a knife that has a significantly smaller blade and thinner handles and misshaped handles because they polished and polished and polished and polished and well, you know...polished.
In today's knife market, there are so many choices, but back in the early 1980s, the Buck 110 was probably the best pocket knife available.
You are right. The selection was not as big, and Al Gore had not invented the internet yet, so you had to rely on sporting goods and hardware stores.
Great idea, love Buck knives.
Glad you liked it.
Pretty sure I paid 27.00 $ back in 97 for my first Buck 110 . A few more models and I’ll have all the 110’s Buck makes short of the custom shop models . My only complaint is QC varies from model to model . My favorite is the Buck 110 LT . It’s nice and light like the slim selects but you get the full handle .
I'd love to have a 110LT. But, I have yet to find one that had a decent lock up. I realize that finding one that is perfect is probably not going to happen, but I'd like it to be at least decent. When I do find one, I'll be all over it.
@@knifetimestory You're not wrong. Most 110LT's that I've handled hand sloppy lock up. Lots of up/down play. Too bad. It's a good design but sloppy execution.
Nice! I also have a 110 from 2019.
Cool. Thanks for sharing that with me.
The legend Buck brands and best knife pocket in the world🎉
Totally agree! Buck knives are the real deal, and they’re perfect for all kinds of adventures!
Bought my first Buck 110 & 112 ranger in 1973’. I honestly doubt a Roughneck on the construction site. Or a seasoned Hunter would care much about the itty bitty when it comes to the Buck 110. They are built like a tank. I have never ran across an old or New 110 that didn’t lock up as tight as a Springfield 06. Not the best all purpose Hunting/Skinning knife. But a true classic
You are very correct. I just happen to be very anal about knives and actually don't mind modding or repairing or tuning up to make them perfect. Not everyone who is anal though, has the gear to do what I do, so I figure I'll put out the info on things to look out for and maybe save them a little disappointment. Other than that, yep, the average guy buying a Buck 110 could not care less, as long as the knife does it's job!!!
@ Absolutely. Thanks for sharing. Tinkering with knives is a good thing 👍 Definitely enjoy your channel
Thank you for the kind words. They keep me motivated!
I don't use a folding knife for cleaning animals. Easier to clean a fixed blade
Absolutely correct. But, it's nice to have the 110 as a backup just in case!
Thanks for the video, good info on Buck knives. My 110 has finger grooves and a inverted V behind the 110 is that a certain year or part of the model no.? It also came with a brown leather sheath with Buck 110 marking and snap. I also have the 112 but I can't remember why I bought it?
Upside down “V” means 1988. Sometimes they do come with a brown sheath.
Thank you for watching and sharing a comment!
I bougt my 110 in 1970. 440 c.new one in 1990...430 mod. Steel. Good steel .420 not to bad
My 1981 version is 440C. I've always thought that was a good steel. Even made my own custom hunting knives with it.
Cardboard is very very hard on a blade
Yes indeed!
Price increase prior to 2020 was baffling to me too!
Unprecedented. The 110 price on Bucks own site is $64.99. Has Walmart stopped discounting stuff?
@@knifetimestory With regard to Buck Knives...."YES"!
That sucks.
@@knifetimestory And just like that 80's movie title...."Reality Bites".
Let me tell you a little secret that could have saved you a lot of money. I was talking knives with a neighbor who is a famous custom (both fixed and folding) knife maker about my 110 which at that time was about 22 years old that the blade would slightly move under pressure when really bearing down when cutting. He said that was unacceptable and to return to Buck for repairs. It came back as an “11!”
Good to know. Thank you!
Great video! I just subscribed to your channel 😊🔪👍
Thank you very much. I sincerely appreciate the kind words and subscription.
Tom, nice to see this PSA for the Buck 110 curious. Kinky. You've got good colour in the cheeks but to the trained eye, are obviously hanging by a thread. Christmas can do that to you, to say nothing of the abundance of fresh air and lack of erudite conversation you're at risk of, living where you do. Don't forget to supplement! I had hoped as part of this soft sell, you might have been a bit more of an apologist for the format in this day and age. I get the history, the iconic-ness of it all but....I'm both charmed and repulsed. I DO want one...maybe...Something about the weight; it's an utter pig on the belt and the steel that always needs an apology appended to its declaration gives me pause. Obviously the hard men of yore were stronger than the moisturized cupcakes of today. Shooting off hand to take a deer at 800 yards, getting the corn in the ground and raising a barn for the neighbours...all before lunch. The change in the men notwithstanding, there are some real stunners these days in the world of knives; perfectly poised at the Venn diagram intersection of weight, $$ and performance. Picking up a Spyderco Native with FRN handles after the Buck and I feel like Luke Skywalker using the lightsaber (WITH the Force). The clerk beside me is at risk of being cleaved in two! As always appreciate the thoughts from the deep well and rich inner life you've curated. ;)
Wow. Thank you for your comment. I read the first part to my wife and she was touched that you mentioned my lack of healthy appearance, and then shared with me that some of the folks at church have approached her and said something. I've been to the doctor, had all the tests and blood work, and I am fit as a fiddle according to the results. I've lost about 40 pounds since we moved here in 2022. I don't have a zest for eating like I used to and since I was not overweight to begin with, 40 pounds can really show. I'm now making a concerted effort to eat regularly. Your honesty and concern are truly appreciated.
Aside from that, I'm glad you enjoyed the video. I very much enjoy your comments with a fun and creative command of the English language. Very refreshing!!!
You were the kid "squints" in the Movie Sandlot.............
Ha ha ha. Never heard that one before.
I can’t help myself😂😂😂😂🤪
Nope...I am weak!!!
My 110 is from 67-72 years.
That is awesome.
I bought one and was very disappointed. The brass wasn't polished at all. It makes me think of what other mistakes they made while making my knife. 😐😐😐
Did you buy it new in a box?
Carry it in your front jeans pocket for a month…it will polish up…
I do not like Benchmades. 440 is easy To sharpen .
Benchmade is not for everyone. Yes, 420 is easy to sharpen. Really takes a scary edge when stropped.
To find a good 110 you must buy at least 30 pieces . Maybe you get lucky to find a well centered one with a good lock up . I have bought around 5 so far, they are all garbage .
I kinda allude to that in the video when I say that finding a good one did not just happen. I gradually kept finding one better than the previous, until I finally, after at least 10, found the Unicorn.
Buck 110 is great. The sheath that is made in Mexico is poor. Cheap quality leather and the belt loop on it is not stitched but attached by a rivet that's going to fail. Buck might as well sell the knife without any sheath. Just don't sell me a classic American knife with a junky Mexican sheath.
You are right and wrong. The sheath is made in Mexico. It is sewn, not riveted. Never been riveted. And that is why I tell you to buy them in a box so that you can inspect the sheath and see that you’re getting a nice thick piece of leather in all of the important places.
Brick 110 lol
Not sure what you mean by Brick?