Yes, Dante is working as expected and brilliantly with the Wing. If you open your Behringer Wing yourself to add a card from a different manufacturer and it doesn't work as expected, I can imagine you haven't receive a response yet from Behringer. Have you asked Audinate? Did they respond? If you can't access Dante on the network, it is clearly a settings error / user error. Have you: The latest FW version on the Wing? Registered the BL card in the Wing? The right firmware version for the BL card? Set the Dante Controller correctly?
@@HATCH_KTV I'm sorry for my assumption. There are a lot of variables impacting on your issue. It has to do with the Firmware on the Brooklyn II. To read more about this, I suggest: facebook.com/groups/434340887270203/permalink/1533106360726978/
That's a question that you can only answer. Let me share my calculation: Band needs 7 channels coming from a laptop. I already have sufficient inputs (Wing, Wing Rack, DL32,DL16). Dante card €395,- Dante Virtual Soundcard €95,- total: €490,- For that money, the laptop is connected with one cable only and I have potentially 57 (64-7) extra inputs and flexibility.🤘
The slot is hinged like it is in the full Wing. Push in the card at an angle, then push it down. Done twice now.
That's odd. You are probably right. I noticed a hardware difference though. I have to check my Wing video to spot the difference.
I'm going to get the Wing Rack out of the rack again and open it up 🙂
Is the DANTE working on your network? I did the same thing but I cannot access DANTE on the network. I aldy told Behringer but still no response.
Yes, Dante is working as expected and brilliantly with the Wing. If you open your Behringer Wing yourself to add a card from a different manufacturer and it doesn't work as expected, I can imagine you haven't receive a response yet from Behringer. Have you asked Audinate? Did they respond?
If you can't access Dante on the network, it is clearly a settings error / user error. Have you:
The latest FW version on the Wing? Registered the BL card in the Wing? The right firmware version for the BL card? Set the Dante Controller correctly?
@ I have the Brooklyn II PCB Rev 4V1 pre-installed on the WING RACK. It cannot read and work.
@@HATCH_KTV I'm sorry for my assumption. There are a lot of variables impacting on your issue. It has to do with the Firmware on the Brooklyn II. To read more about this, I suggest: facebook.com/groups/434340887270203/permalink/1533106360726978/
Is it worth money
That's a question that you can only answer.
Let me share my calculation:
Band needs 7 channels coming from a laptop. I already have sufficient inputs (Wing, Wing Rack, DL32,DL16). Dante card €395,- Dante Virtual Soundcard €95,- total: €490,- For that money, the laptop is connected with one cable only and I have potentially 57 (64-7) extra inputs and flexibility.🤘