Yamaha Blaster Bottom End Rebuild
HTML-код
- Опубликовано: 27 авг 2024
- Hey guys Dallin here from Moto Repair!! Today I cracked down on this Yfs200 Blaster motor and rebuild the bottom in 4 hours!! This motor was whack, It had a bend connecting rod and tons of aluminum shavings but despite all that, it was in really good condition and ran perfectly afterward!! So if you did enjoy this video please like, comment, and subscribe!!
To all those who feel need to tell me how I don't know how rebuild motors. I get it the "techniques" used in this video are all wrong but hey I was 12-13 these were filmed 3-5 years ago depending on the video (uploaded a year or two ago) I can assure you that no motor after this (besides the other two motor rebuilds on the the channel) was built like this. I just glad I was motivated to try this because here I am years later I've seen over a thousand customers and have flipped a 1-2 hundred bikes and happy I did it. This motor ran for years same as the other motor rebuilds on the channel then they owners sold it and I never saw it again so I guess I got lucky.
Hey bud, you learned right? We all start somewhere and forget the haters bro.
Just got a blaster for my nephew that needs a full rebuild
What’s the puller you used called???
@@Bossdon508 are you talking about the case splitter? That's from Tusk racing.
@@MotoRepair350twin what brand installer
@@Kyle_gallegher Tusk
I thought that I was the only one to discover extra repair..... feel better now and great work rolling with the discoveries!
I cried watching you hammer that crank bearing in... word of advise take a small tank of map gas torch heat up the race, take the flam and circle it 40 times the bearing will drop right into place, then hold it for 30 seconds so when it cools it dont push the bearing out, I'm a certified Polaris tech, and make sure the cases are lapped before you put them back, they heat and contract so much, make sure the flush plays a big part, to do all that work and money for nothing, that's rookie mistakes.
I did heat the case and i froze the bearing too! I had my dad check the cases on a machining surface (I think that's what's called?) And they were straight. I did also clean everything in the parts washer. A lot of the time don't film everything.
U see the gear on the blaster bottom end? There is were the metal came from he put his customer's bottom end back together like that! Lost me! And yes hammer on the crank gears lol and case splitter for a blaster bottom end hes a monster i wouldn't let him touch my brake pads! Lmao
F all the bad comments that's how we all learn... thanks for the video
I know who I'm getting in touch with if I have issues with my Blaster. About to do the top end. Live out in Queen Creek.
I cried when you didn't use a cog puller, but good video mate
Haha I do need to invest in one of those. Thanks for watching!
This is where I’m at
Good job!
Step one: Throw your flathead screwdrivers in the trash.
Step two: Always do crank bearings with a crank, especially on a cheap blaster.
General advice: When you silicone cases and it's oozing all over the outside of the case, imagine what's going on inside.
Ahh to be young and dumb 12-13 isn't the smartest age haha. These videos were filmed 3-5 years ago (depending on which video) but posted them a year or two ago and rewatching them is painful. I'm glad I was brave enough to even try because years later I've seen over a thousand customers and have flipped a couple hundred bikes. I can assure you that no motor after this (besides the other two motor rebuilds on my channel) was built with these lovely "techniques". This blaster ran for a good few years then the owners sold it and I never saw it again but I guess I got lucky.
Got a question my blaster locked then unlocked and now it won’t turn on it has compression what can it be?
Like the job keep it up ... I have the same engine you just work on I got a 2000 Yamaha blaster 200 I got it for $50 dollars I haven't mess with it yet but if I need a engine rebuild I will keep it in mind we not that far way haha Utah , but how much will you charge to do the same job you preformed on that engine to my engine?
$180 labor + parts, so around $380-ish for all the work
When mine blew up it took the bottom of the piston and wrist pin with it and bent the rod almost in a 90 degree angle
Dang dude!
Metal hammer on bearings? Im out
Should have fixed drain plug. Weld a nut on it
Back then I didn't have a welder or access to one.
Pair of vice grips works wonders my friend 😂
@@camscars2899 Trust me dude vice grips weren't gonna save the day this time.
What's the part number to that TUSK puller. I need one. Thanks
Looking for the same thing!! I need the exact same thing where do I buy the tusk puller??! Any link on it
How much did you charge for the bottom end rebuild on it?
What was the part number for that case splitter I need one badly for my blaster is there any way you could send me a link to buy one from eBay thank you
Would this be the same process for a 2004 blaster 200 engine?
Yes
You need to do that on mine im in tx
hey can you help me. I also have a Yamaha Blaster 200cc but something is wrong with it's gears. I cant put it in gear and it goes a whole round so it you can keep shifting up or down as long as u want. Do you have any idea what it could be so that I can order the parts that are needed.
Hey man still having problems with it?
@@MotoRepair350twin hey bro you still got it ?
Where are you located I need mine rebuilt too
Mesa, Az
Moto Repair dang I’m in Minerva Ohio
Jonathon Newport I repair them I am in Indiana close to chicago
Johnson Dave got small hole in crank how much to fix rebuild
Do you need the crankcase splitter to do a bottom end on a blaster?
Well there's need and want, I personally like having a case splitter cause it won't damage the sealing surfaces. That being said you don't need one but I recommend it.
Absolutely do, if not then at least a steering wheel puller from harbor freight
Are you in California?
can I email someone a video of my problem of my Yamaha blaster my kick start is jam
I wouldn't be talking s*** about what's broken the motor talkin about lol it makes more power watching you do this rebuild 12 13 14 15 or 16 years old you should never touch a motor again
Where are you from?
Were u located
There's no way you should reuse those bearings
I know... That's what the customer wanted.
Like - Subscribe and Saved to Playlist. Is more like it.
Rebuild my blaster engine for me? Where are you lovated
Greenfield And Brown in Mesa, Arizona
@@icecoldsavage9231 Yeah it's super easy for someone to do it themselves but I did this in half a day and did decently right if i did it today I'd use my bearing installer and gear puller. I know not every mechanic is like this though.
I’m in Mesa I need your labor
Ok. What do you need done?
How long does that take to do overall?
I did this one in about 4-5 hours.
Jus so I can have parts of my bike from you
can u do mine
clean it before u put the bearings in man my god the new bearing are gona be loaded with that meatal or at least contaminated
Where are your stats glasses?
Where do you live bro?
Mesa, Arizona
U rebuilt that thing for it to live like 3 mo🤣 but got damn i can't hate im still prolly not much better 😭
I was 13-14 and had no help from anyone. For one of my first rebuilds I think I did pretty good. This ran for a couples years after I built it and never skipped a beat then the customer sold it.
@@MotoRepair350twin no doubt it was a yoke more than anything my dude keep working 💪
Can i get ur contact info my freinds bike has same problem i live in surprise
bro its an aftermarket crank... the rod isnt bent... it comes like that...
Haha yeah they bend them from the factory for aero dynamics obviously
Hey man do you have any mods/parts you can send to me for free?
I got a broken down blaster for free from a buddy
Nice dude, thats a score!!
Moto Repair ya it ran for a second then the motor siezed don’t really no how to rebuild a bottom end but gonna try
@@garrettjost133 I think you could do it, it's not as hard as you think.
You put that customer's blaster bottom end together with that shot Gear shame on u You lost all credibility with me!!!!
Time stamp? I did inspect everything before reinstallation cuz I don't want to spend all the time rebuilding it and then put something that less-than-ideal in the motor that I just finished. Post a timestamp.