No, you put ( chunky). glitter , glycerine and water in between the two walls thru a hole in the bottom. Makes a snow globe. VYour right about plastic w/ epoxy. Hope this helps answer your question.
How are you bonding the epoxy on? I find the epoxy just sits on the surface of plastic. I work with epoxy a lot. I’m not understanding how your getting it to adhere to plastic. Also, if I put too much of anything including pigment it will disturb the structure of the epoxy. Is that cup flexible at all in the slightest ? How does it not crack the epoxy? Do you put these in the dishwasher? Hot water?? these?
Hi @lilyrisecraftroom! I am sorry for this question, maybe you have had answer it before! The Starbucks cups or logos, do you get them with the logo already? Or do you buy or make the logo? Where can I get the logo separately please! Thank you
Do you happen to have any suggestions on how to “fix” a fish eye or bald spots on a cup? Of course, when making this one I had a couple bare areas and nothing stuck to the Starbucks logo at all. I did use the same measurements you recommended for the epoxy.
Thank you so much for this tutorial. When you were mixing both colors I was thinking to myself how brave you are. I would be afraid it would set, but seriously thank you for the tutorial.
WAIT A MINUTE!!!!😲 YOU CAN SEAL FLEXIBLE COLD CUPS?😲 I've been told that's a NO CAN DO!!! BUT YOU JUST DID IT!!! AND EXTREMELY WELL!!! MIND BLOWN!!!🤯 Ma'am, you just changed my cup making life goals!😂😂 This is AMAZEBALLS AMAZING!!☺ I can't thank you enough for sharing, new subscriber for life!!!!🥰 I'm going to try it!!!
Thank you so much. I was looking at your ombré glitter cup tutorial and noticed that for this one you don’t do the part where you sand the first epoxy layer. Are you no longer doing that step? I’m new to cup making with epoxy and would love your input. Thank you so much.
I have a bunch of color change cups that no longer work 😞 I wanna try something like this, to make them pop again. Any advice on how to keep the paint vibrant and keep them from not working anymore? Does light damage the paint?
Thank you so much for the video very helpful. Question- can I apply a vinyl sticker after the glitter is set or do I apply another layer of epoxy wait 4-6 hours and then apply sticker?
Thank you so much for sharing and being so helpful with everything. I am new to crafty and epoxy. I’m sorry to ask you this silly question. In between epoxy layers do we leave the cup spinning in tuner for the 24 hours? 🤭 I try a cup but I think epoxy it’s pealing off the cup. I don’t really know what I did wrong.
Hi! I watch your videos all the time taking notes lol haven't worked up the nerve to actually try it. I do have a question do you leave the cup turning for 4-6 hours or place on a plate to finish drying? Thanks
Thanks so much for sharing 😍 the cup looks amazing! I have a question something that happens to me often and I don’t know what I’m doing wrong do you ever get the epoxy lifting from the top rim? Every time I seal the cup with epoxy and once it’s fully dry I try the lid on the cup I get like an air bubble or it lifts idk what I’m doing wrong or if I’m putting to much epoxy on the top..I hope I make sense 😭😩
I love your work!!! Thanks for this video as I’ve been epoxing cold cups for a while now and bought those pigments because of you a year ago but was to scared to try bc it reminded me of mica powders and those go on streaky watching you epoxy this was amazing so smooth no streaks not sure if it applies the smoother then mica powder or you are a goddess😍 but also I have a question why not add decals on the third layer instead of 4th? With 20ml shouldn’t it be enough for the chunky glitter or am I wrong? Thanks again and thanks for the huge inspiration
Hi thanks for the support! Sorry for the confusion. I dont remember what i said lol Yes put the decals after the 3rd then seal it in with a 4th layer. 😉
Hola Lily, este es mi primer vídeo que observo y me parece que tienes un excelente contenido !!!! Me encanta como explicas todo !!! Yo soy nueva en este proyecto :) tengo la cricut maker y apenas estoy empezando y lo estoy tomando como un hobby y me gusta mucho aunque aveces me confundo mucho lol Muchas gracias aprendí muchísimo contigo!!! Dios te siga usando para muchas personas como yo, un abrazo !
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Love Solar color dust! The shop it’s actually right down the street from my house. Wolf is a super cool dude.
Thank you so much for sharing your knowledge and making these tutorials!! Just ordered some glitters! I appreciate you!
See I was very intimidated to try this but now I think I’m ready. Thank you !
So nice! I love it!! I like to try but a lot of people say the is toxic, the you can’t do it on a regular cup has to be a double insulated cup
super lindos te quedaron, excelente video.
Can you do this on the regular tumblers 💞
This was a great video! Do you epoxy all your Starbucks cups that you have put vinyl on?
Thanks for sharing. I always wondered how it could be done!
That is so stinking cool. Thank you for the tutorial
So cool, I love your videos!!
I thought epoxy on these cups was something that is not suppose to be done? Doesn't epoxy need to be applied on double walled cups and not plastic?
No, you put ( chunky). glitter , glycerine and water in between the two walls thru a hole in the bottom. Makes a snow globe. VYour right about plastic w/ epoxy. Hope this helps answer your question.
How are you bonding the epoxy on? I find the epoxy just sits on the surface of plastic. I work with epoxy a lot. I’m not understanding how your getting it to adhere to plastic. Also, if I put too much of anything including pigment it will disturb the structure of the epoxy.
Is that cup flexible at all in the slightest ? How does it not crack the epoxy? Do you put these in the dishwasher? Hot water?? these?
Hi hun enjoying watching your great videos please where do you buy your Starbucks cups I can’t seem to get them
Hi @lilyrisecraftroom! I am sorry for this question, maybe you have had answer it before! The Starbucks cups or logos, do you get them with the logo already? Or do you buy or make the logo? Where can I get the logo separately please! Thank you
This video was great! Can you use the color change dust in a snow globe tumbler? If so, can you do a video?
Hi. Yes will make a video soon😉
Absolutely amazing, thank you so very much for sharing with us it is greatly appreciated.
Thank you! I’ve been using Atlanta chemical engineering and they used to be so good and the last 3 times I ordered the pigments have been terrible!
Hey thank you I just got my order today
I love it 🥰! Would you know if it would work with the drops as well? Instead of powder
Do you happen to have any suggestions on how to “fix” a fish eye or bald spots on a cup? Of course, when making this one I had a couple bare areas and nothing stuck to the Starbucks logo at all. I did use the same measurements you recommended for the epoxy.
This is freaking awesome! Thanks for making this step by step! 🤩
Love the colors!! Love your work!!
I thought you couldn’t put epoxy on these kinds of cups because it’s not double pain is that true. I love it though great idea..
Can you make a color changing double wall acrylic tumbler video?
Thank you for sharing and being so helpful!!!
Hello, how do you know what size vinyl you need for each cup?? I want to start making some cups but I have no clue on the size. Thank you!!!
Absolutely beautiful! Great video!
Also, ABSOLUTELY SUBBED!! ♥️💙💗💘 P.S, you’re gorgeous 🥰
New subscriber! Absolutely loved this video!
Thanks for subscribing!🥰
Thank you so much for this tutorial. When you were mixing both colors I was thinking to myself how brave you are. I would be afraid it would set, but seriously thank you for the tutorial.
Alumilites Amazing Clear Cast doesnt set too fast. It gives you time to work with it.
This may be a silly question, but could I use a hair dryer instead of a heat gun?
Super cute!!!
By chance do you put a care card in your cups. Some ideas for these cups what I should put 🤔
Thanks for sharing!! Love all your videos
I loved your video all very well explained, just a question? I've heard that epoxy is bad if we put it in plastic cups! How true is that!!
Está hermoso tu trabajo
Can you use any double wall tumblers instead of starbucks.
Yes of course!😉
New subbie!!!! Love this tutorial...thank u for sharing😁💖
Why not apply glitter with first epoxy application?? By the way beautiful work
Your videos are amazing along with your cups!
WAIT A MINUTE!!!!😲 YOU CAN SEAL FLEXIBLE COLD CUPS?😲 I've been told that's a NO CAN DO!!! BUT YOU JUST DID IT!!! AND EXTREMELY WELL!!! MIND BLOWN!!!🤯 Ma'am, you just changed my cup making life goals!😂😂 This is AMAZEBALLS AMAZING!!☺ I can't thank you enough for sharing, new subscriber for life!!!!🥰 I'm going to try it!!!
Thank you for sharing! Your cups are very beautiful! ❤️
What kind of glitter do you use for your cups? Love you video 👌🥰
Totally love your videos! Always so helpful. Thank you!
love your videos ! can you do a tutorial for chunky glitter on a cold cup ?? 🤗🤗🥺🥺
Yes. that's actually my next one! :)
Yessss, I second this request lol
@@LilyRoseCraftroom yay lol cant wait ! i struggle with chunky glitter cups
hi new subscriber here !!! is it possible to mix this with the vegetable glyserin to make a snow globe cup?
Thank you so much. I was looking at your ombré glitter cup tutorial and noticed that for this one you don’t do the part where you sand the first epoxy layer. Are you no longer doing that step? I’m new to cup making with epoxy and would love your input. Thank you so much.
I have a bunch of color change cups that no longer work 😞 I wanna try something like this, to make them pop again. Any advice on how to keep the paint vibrant and keep them from not working anymore? Does light damage the paint?
I love it
Omg! Ty ty ty sooooo much. For sharing. Where can I order the color change dust at? Please Lmk thx 😉
Hello. Love your cups. I made my first glitter cup with epoxy. I’ve let it cure for weeks now. How do I get rid of the strong epoxy smell?
Thank you so much for the video very helpful. Question- can I apply a vinyl sticker after the glitter is set or do I apply another layer of epoxy wait 4-6 hours and then apply sticker?
Apply another layer of epoxy. You need a smooth surface to apply your vinyl or else it'll be bumpy. 😉👍🏻
Thank you so much for making this video! 🙌🏼
Is the epoxy safe to use on plastic? I thought it was supposed to be double Wall.
Little advanced for my ability but so cute!!
I am using this dust for a snow globe tumbler . what’s the best mixture with this dust ?
Thank you so much for your tutorials! You do amazing work I follow you on IG also and love it all 💕 I’m one of the ones that had asked for this ☺️
LOVE IT!!
Love it 🥰
Beautiful!! Thank you for sharing. Love these 💕🙌
They look amazing 🤩
WOW!!!!! LOVE LOVE LOVE
Thanks so much! I have learned so much from your videos! Appreciate you! Thank you!
thank you so much for sharing !
you don’t have to sand the glitter on these ? or how do you keep the chunky glitter down ?
Hi sorry did you say 10ml part A&B mixed together to a total of 20ml?
Great video! Thanks for sharing
Can you use cristalac instead epoxy?
Hi this is so cool, do you know if it will it also work with Brite tone?
Any suggestions on how to price these for sale??
Wow do you leave the spinner thing on all the time? For all those hours?
I love your channel!!!!
Thank you so much for sharing and being so helpful with everything.
I am new to crafty and epoxy.
I’m sorry to ask you this silly question. In between epoxy layers do we leave the cup spinning in tuner for the 24 hours? 🤭
I try a cup but I think epoxy it’s pealing off the cup. I don’t really know what I did wrong.
how do I get the decals used to temporarily cover my Starbucks logo while I make this?
Thank you sooo much share!! ☺️☺️
Thank you for this tutorial, love it!! Can you tell me how many ounces or grams are the bags of the solar color dust? Thank you
I just ordered some, they are 10 grams.
The cup turner tour using is not the same one as the link on your description. Do you recommend it and do you still have that one ?
Wonderful job
Could I do this in layers?? In 3-4 inch increments of color?
These look amazing!! Thank you so much for sharing
Thanks for sharing! Do you wear a safety mask while doing this? If so what do safety mask do you use?
YES! I use a 3m Respirator mask with organic filters. I have links in the description of my mask and the filters.
Hi! I watch your videos all the time taking notes lol haven't worked up the nerve to actually try it. I do have a question do you leave the cup turning for 4-6 hours or place on a plate to finish drying? Thanks
Wondering the same thing
Keep it spinning, if not spinning the epoxy will drip off
I love this cup and want to make one but I cant find any cold activated pigment powder in the UK 😪and solorcolordust dont ship her at the moment, 😭
*here
Does it necessarily have to be vinyl to cover the Starbucks logo or can I can use any kind of stickers?
I was wondering do u sell these also if so how much I love them
Can you use thr color changing glitter for dubble wall ones like as snowglob kind
What do you refer to as Part A and Part B,are those two different types of epoxy or no?
when you buy epoxy resin it should have two bottles marked "A" and "B" which you need to mix equal parts of to activate the resin to harden :)
I love all your videos!
Where is the best place to purchase these cups. I have two that I bought on Amazon, so I’m going to use those to practice!
Thanks so much for sharing 😍 the cup looks amazing! I have a question something that happens to me often and I don’t know what I’m doing wrong do you ever get the epoxy lifting from the top rim? Every time I seal the cup with epoxy and once it’s fully dry I try the lid on the cup I get like an air bubble or it lifts idk what I’m doing wrong or if I’m putting to much epoxy on the top..I hope I make sense 😭😩
Can I use any type of glitter? Or what do you suggest
I sell high quality Polyester glitter on my website LilyRoseCraftroom.com
I love your work!!! Thanks for this video as I’ve been epoxing cold cups for a while now and bought those pigments because of you a year ago but was to scared to try bc it reminded me of mica powders and those go on streaky watching you epoxy this was amazing so smooth no streaks not sure if it applies the smoother then mica powder or you are a goddess😍 but also I have a question why not add decals on the third layer instead of 4th? With 20ml shouldn’t it be enough for the chunky glitter or am I wrong? Thanks again and thanks for the huge inspiration
Hi thanks for the support! Sorry for the confusion. I dont remember what i said lol Yes put the decals after the 3rd then seal it in with a 4th layer. 😉
Hi! Have you used the thermal dust on double insulated tumblers?
So cool!!!
Hola Lily, este es mi primer vídeo que observo y me parece que tienes un excelente contenido !!!! Me encanta como explicas todo !!! Yo soy nueva en este proyecto :) tengo la cricut maker y apenas estoy empezando y lo estoy tomando como un hobby y me gusta mucho aunque aveces me confundo mucho lol Muchas gracias aprendí muchísimo contigo!!! Dios te siga usando para muchas personas como yo, un abrazo !
Just liked your video and subscribed. Great job by the way!!
that is so cool thank you so much
Can you use any apoxy and what do you sell your cups for.?
Could you use these thermal powders in a snow globe style tumbler?
Yes 😉
I love your videos 🥰
I have a question. When you say 48-72 hours till cured does that mean leave it spinning 😵💫 or after it dries leave it on the side ? Thanks
No. When is dry to the touch. Just put it aside.
Where do you buy cheaper Starbucks Cups?
Cheapest way is to get them at Starbucks. Third party sellers up the price.
Beautiful cups but your not supposed to epoxy them you can squeeze the cup or drop them and the epoxy will crack off
What would you use in its place? I wana do this for next years guft giving