Sir. Please help me understand how an Advance Starter signal works. Does the station master wait for a train to reach the next station before giving a clearance to the next train? If so, then what is the use of Automatic Block section?
SM has to wait for train clearance in Absolute Block System, not in Automatic Block area. In Automatic area after train passes next Automatic signal(at around 1 KM)+120 m, LSS can be taken off 😊
S/L, MAS BOL- NLT(not less than) 180 m SOL-120 m आपने जो BOL/SOL बताया है वो TAS में होता है, लेकिन TAS अब use में नहीं है, Exam में भी नहीं आता, इसलिये उसे नहीं याद करना चाहिए
If Adv Starter/SLB is not available in a Station, Then both, SOL+BOL(120 m+180 m) = 300 m i.e. upto Opp Home Signal is to be kept free before taking off the Home Signal
Normally on S/L Station Section lies between both side Advance Starters (LSS), it is not a fixed distance between both side LSS of S/L or D/L, but approximately it should not be less than 900 metres.
Nice sir 🎉
Thank you ☺️
Thank you so much sir
You are welcome 😊
नमस्ते सर।
बहुत अच्छी पहल की आपने सर। आपके इस पहल से बहुत से trainees को मदद मिलेगा।
Sure,
Thank you 😊
Sir your videos are very helpful and your way of teaching is wonderful.
Thank you ☺️
Sir i am train manager at kgp division. Your videos are very helpful and clearing my all ओलझोल thank u sir।
Keep watching and keep learning!!
Great 🎉🎉🎉
I'm CLI / SKLR/MYS
Thank you ☺️
❤❤❤
Very Good useful for all SM ALP and LP etc
Thank you Meena ji
I'm Pointsman at Agra division and these videos are very helpful to me for departmental exams. Very very thankyou sir
You are most welcome 🤗
भाई मेरे साथ mutual transfer kar le
बेंगलुरू division
You are great sir ❤
Thank you ☺️
Thank you soo much sir now iam sm traineee but unable to understand in class but now iam clear..thank you
Welcome 🤗
&
Thank you 😊
Super dear ojha jee
Thank you 🙏
I'm sr alp sir ur videos very useful for us.. plz keep it continues make video Full GRS chapter sir specially accedent protection and authority
Ok 👍
Well explained sir
Thank you 😊
Sir. Please help me understand how an Advance Starter signal works. Does the station master wait for a train to reach the next station before giving a clearance to the next train? If so, then what is the use of Automatic Block section?
SM has to wait for train clearance in Absolute Block System, not in Automatic Block area.
In Automatic area after train passes next Automatic signal(at around 1 KM)+120 m, LSS can be taken off 😊
@mangalaprasadojha5328 what is LSS (i am new to this).
Also how will station master know if the train has reached the next signal?
@@abhinavminnalamohan6292
When the train passes next signal, indication will appear in SM Panel 😊
@mangalaprasadojha5328 Thank you sir
Sir , how to perform shunting by station master at Special class station?
प्रणाम सर जी
बहुत बहुत धन्यवाद सर जी
Thank you 🙏
Sir NFR me goods train , kanchanjunga ko rear collision hua hai keya karan ho sakte hai, aik vedio banye
Ok 👍
Concept clear ho gya sirji
Thank you Deepak
Very good sir
Thank you 😊
Thanks sir 🌹🌹
Please check block overlap in single line.
BOL in S/L & D/L (MAS)
NLT 180 m
Slb ko advance starter k uper hi bnaya hai.... Kya ye possible ki thoda aage pichhe bhi bana sakte dono ko
Same place mein hi lagata hai, dono me se ek hi rahega
Good information
Thank you 😊
Very nice sir ji
Thank you 😊
Thank you for the session sir❤
How to connect you sir I'm a trainee in zrti udaipur
Thank you sir
Welcome Ramesh 😊
सर, SOL स्टार्टर के आगे 120 मीटर है या ट्रेलिंग POINT के आगे 120 मीटर है?
S/L में trailing point se measure kiya jata hai -120 m
D/L mein Starter se 120 m
Very very nice 👍 sir
Sir single line m to BOL 400 m hota hna MAS mein and SOL 180 m ..kya ye sahi h ? Plz clear kren sir ji
S/L, MAS
BOL- NLT(not less than) 180 m
SOL-120 m
आपने जो BOL/SOL बताया है वो TAS में होता है,
लेकिन TAS अब use में नहीं है, Exam में भी नहीं आता, इसलिये उसे नहीं याद करना चाहिए
If advance stater or SLB not available then SOL how to count
If Adv Starter/SLB is not available in a Station,
Then both,
SOL+BOL(120 m+180 m)
= 300 m i.e. upto Opp Home Signal is to be kept free before taking off the Home Signal
Thanks sir
@@amarendrabarman24
Welcome 🤗 Amarendra
Nice video sir 🙏🙏 Thank you
Thank you 😊
Why SOL 120m and BOL 180M only any specific reason behind that
It’s just on the basis of Braking Distance, meaning sufficient distance to ensure safety of the train 😊
Sir goods theory classes also start sir
Ok 👍
Sir , SOL trailing point to advance starter ka distance h ya starter to advance starter ka distance?
On S/L
Trailing point to Adv Starter
On D/L
Starter to Adv Starter
Thanku sir
Sir , shunt singal ko first stop signal k niche kyu ni lgate?
@@shaktimaanh1153
Due to safety reasons 😊
Sir..Could you make one video on only points pls
Ok 👍
Thanku very much sir
You are welcome 🤗
गुरूजी प्रणाम.
बहुत ही बेनिफिशल विडिओ. बस आवाज़ थोड़ी कम है. अगर इम्प्रूव हो जाये तो और आनंद हो जाएगा
Thank you 😊
Sure 👌
Please use Earphone while watching for better sound
What is distance between two LSS in single and double line ?? Explain details
Normally on S/L Station Section lies between both side Advance Starters (LSS), it is not a fixed distance between both side LSS of S/L or D/L, but approximately it should not be less than 900 metres.
Controller ke duty ke baare me batayeaga plz
Sirji. Pn. And I'd. Dega
Good morning sir
🙏🙏
Sir train manager ka ek batch chalu kijiye hindi medium training ke liye
Ok 👍
Good morning sir 🙏🙏🙏
🙏🙏
Namastey sir🙏🙏🙏
🙏🙏
Sir BOAL ke bare mein samjaye
इसी विडीओ को पूरा देखो, आगे SOL-BOL दोनों समझाया है
Sir My. Name is suresh working as Pointsman in solapur division, need your help. Can i get your contact no please.
I will increase views now
Thank you so much 😊
SIR YOUR MOBILE NO PLEASE
Sir please number send kijiye ga sir
Sir aapka contact no kya hi
Or WhatsApp no
Aap apana number bhejo,
I will call you 😊
Thank you sir
You are Welcome 🤗
very nice video sir 🙏 thanku sir 🙏
Thank you 😊
Thank you sir
You are Welcome 🤗