I just bought my 93 GT 2 weeks ago, it’s a completely rust free true 88K mile car. Interior is 9/10, paint is like an 8.5/10. Black on black interior car. Still has the cats, smog system, egr everything is stock. I payed $10K for it.
@@TheInfamousProject come to Indiana and it’s yours lol I’ve always wanted an 96-98 Cobra. I’m hoping next year I can get my hands on one to park along side the fox
Awesome job man! I went absolutely crazy restoring my 92 GT's interior and nothing makes me smile more than knowing that "I" did that when i get in the car. I'm chomping at the bit to pull my motor/trans but space is tight and funds are limited. Love the channel.
These Fox Mustangs were my childhood generation. I’m 41 years old and my dream is to find one of these someday. Coupes are awesome but I’d go with either a hatchback or convertible soft top. I also like the 5.0 GT too.
New subscriber here from Michigan!...just picked me up a 89 Scarlet red notch rust free that was a 4 cylinder car and it's been 460 swapped...I saved the car from becoming a drag car...I got real lucky and the guy I got it from saved all the interior parts that took me about a half hour to reinstall...I plan on getting rid of the 460 and c6 that's in the car and going with a fuel injected Windsor power plant for my build....I kicked around a coyote swap but I'm leaning towards the Windsor instead....but cut a long story short I paid 5700 for my notch because of how clean it is....these notches are getting hard to find that aren't complete drag cars so I'm glad I finally found one....I've owned a ton of hatches but I finally got the notch I always wanted!...it was definitely worth the 5700 dollars I spent for my car.
I had a white hatchback that I bought back in 99 when you could buy one for $1000 with a bad transmission. I converted it to manual which was pretty straight forward. I’ve been looking at a few clean 4 cylinders and considering this conversion 👍
Every project takes time and $$$! If you’re not going to spend both someone will buy your project cheap! That’s why buying your project cheap is key, and have a straight body with no rust is key! Keep um coming and keep um running!
Knowledge is power! I spent way more fixing a 06 BMW 330I then the car was worth but now I know a ton about E90s and no one can take that away from me except if demensia kicks in!
How times have changed... I bought my 1989 1//2 5.0 5-speed LX notch BRAND NEW for under 10k, I still had room to purchase my Flowmasters, Saleen wing and Ram Air hood from Cervinis ( I saved a lot by picking up cuz I live in NJ) The Steeda ground effects put me over the10k. I kept the special sport package (140 mph speedometer 89 😜) stock color 'Almond' because it was an absolute sleeper, especially with the tint. ARE BBS Mesh rims in black were added. In December '91 I did a 5k value custom paint job in a Fuchsia pink with a blue pearl in the clearcoat... I could have never afforded it, but I paid for supplies, my brother is a professional auto body painter who specializes in custom paint. I LOVE my Pinkpony! I've been enjoying her for daecades! yes, I still have her and she is about tonbe rejuvenated! Over 30 years and only on my 2nd set of Flowmasters and 2nd clutch ..... We won't discuss how many sets of Gatorbacks I have turned into slicks 😜 ... Lol this Mama doesn't play! I still have only 93k miles, somehow less than my '06 Explorer 🤷🏼♀️ go figure
I just bought a 88 notch with fresh black paint. Now that I've been watching your videos I'm finding out it's not as great as it looked. They didn't remove any trim just painted it all black but thankfully the guy used straight black base and clear so I can match the paint easily when I go to do the jams ect. Right now I'm trying to get it cut and buffed and ceramic coated but yeah I touch it and it's smeared. I love/hate black! YOU INSPIRE ME
This project had a nice arc. Its easy to miss where it started vs where it ended with the other projects in between but who's going to complain about too many fox projects!
NICE UPDATE MIJO! That car turned out fantastic, and on a decent budget! You should do a feature on those perfectly placed, equal length, no wheel hop lines in your driveway! Had to be a well-built car that did that! :-) In all seriousness, that notch was a great story.
I reworked about 65 percent of my 93 notch a few years ago. I bought the lettering and stripe kit from lmr so the mustang on front and rear bumpers is blacked out, the strip in the belt molding was changed from red to black as was the pin stripe. at the time I didnt have the money to buy a compressor and a paint gun so it was shot with duplicolor color match rattle cans. I of course worked it just like you would if you used a compressor all the same prep work, then a wet sand and buf when done so it really doesnt look like a rattle can job. I also didnt the smoked head and tail lights, and Used the peel coat to put a black metallic coat on my wheels. the v down the middle of the hood was flat black when I bought the car when i refinished the hood it was painted metallic black and a boss type hood scoop was installed. It isnt a show car but it snaps heads and is fun to drive even with the 4 banger still in place. At 183k miles she still purrs like a cat and runs down the road like a dream. last year I had the front brakes, calipers, hoses, pads all replaced so she stops right again. I also had the bushings, ball joints, rack, and rag joint replaced so it really drives nice now. Next up is getting the new hood, one fender, front and rear bumpers, a trunk lid, sub frame ties, 8.8 rear, tubular k member, the 5 lug conversion kit, march pulley set up, a few fuel tank, lines pump, etc and the guages so I can install the 480hp 351W sitting in my dads garage with the c4 race prepped trans and converter. It all takes time when your coffers arent real full. We call it the Big Fat Panda with license plates to match.
Im just happy that after years of sitting outside we have finally bought our own house and the garage hase enough room for it to have its own parking spot
The car turned out great! I am doing something similar with mine. I bought a low mileage 4 cyl 5 speed notch and I am the 2nd owner. It is super straight and has a newer paint job. I had a GT I bought years ago and it was a major project. I decided recently to part out the GT because the last owner beat the hell out of it and did some suspect things to it so I will use the parts for the notch. All together I would say I have about 6k in to it. At the end of the day the car will be what I wanted. Even if it was a original 5.0 car I would modify it anyway so I don't see what the big deal is why people give negative feedback between 4 and 8 cars.
@@musclecargarage8882 I will probably be using it for a while since it runs great with 78k miles. I will probably upgrade everything around it until I get another motor since the one in my GT wasn't in good shape and I need to get another one.
@@jamessalter676 oh ok. Mines runs ok seems pretty slow and it got 144k miles i think. Do u have any issues getting up to speed like 60 to 80 miles an hour??
@@musclecargarage8882 lol they are pretty slow and gutless having 89 hp. I haven't done any daily driving with it yet. I have probably got it up to 60 on the back roads without a problem. I just drive it normal for the most part. The 5 speed I am sure helps better than the auto would. I did squeak the tires once doing a U-turn 😆
DUDE I THINK IT IS AWSOME TOO HAVE A FOX THAT ISN'T PERFECT THAT YOU CAN DRIVE AND ENJOY LOL LIKE MY VIBRANT RED 93 COBRA I CAN'T DRIVE IT AND ENJOY IT LOL IT HAS JUST OVER 20THOUSAND ORIGINAL MILES AND ALL ORIGINAL EXCEPT FOR THE EXHAUST AND THE PAINT IS ALMOST PERFECT AND YOU KNOW THERE ONLY ORIGINAL ONCE LOL I LOVE TOO FIND A BLACK 93 COBRA THAT NEEDS TO BE RESTORED SO I CAN MOD IT AND DRIVE IT AND ENJOY.
Definitely agree with you about finding a fox that doesn't need a complete respray paintjob. The days of getting a nice $4000 paintjob is long gone. PDR and a good paint correction goes along way to get thinks started
I just bought a couple weeks ago eh Canadian Lx 5.0 up here for $500 170k sat for 11years but it's kind of a rust stang but I can fix it n make it a daily driver after watching your videos thx
THAT CAR WAS MY ONLY LX I EVER HAD HONESTLY BESIDES MY 93 COBRA THAT I LOVE AND WILL NEVER SELL LOL I WAS NEVER A REAL BIG FAN OF THE LX MUSTANGS I HAVE AND LOVE THE MY 87 GT WITH T TOPS I HAVE AND EVENTUALLY IAM GOING TO BUY A 89 OR 90 WHITE MUSTANG GT SUN ROOF 5SPD AND A BLACK CLOTH INTERIOR.
Love your content! 10k not including a clean fox correct? My definition of clean is a Foxbody in very clean condition cost 16-18k. 6k gets you a roller ready for paint.
Miss my 90 notch. Low miles and all stock 5.0. Only needed paint and seals. Florida car. Sold it for $2k in a jam figuring id get another. Nope. Prices skyrocketed and now i afforded a 94 gt. I like it but my true love is the fox 😢
Great video thanks 😊 for sharing!! I’ve been thinking about converting my power windows to manual. I’m glad you went over the conversion, I didn’t the arm rests were in a different spot!! Of course my car is a 85 SVO, so I’m not sure if any of the information pertains to the earlier fox’s. Great looking build. I’d wheel it everywhere!! lol 😂
YOU KNOW THERE WAS SOMETHING I WANTED TO ASK I HAVE A SET OF THE DEEP DISH STEEDA WHEELS THAT EVERYONE WANTS TO BUY FROM ME DO YOU KNOW THE RIMS IAM TALKING ABOUT.
I just bought my Grandson a 1981 Mustang for his 13thbirthday, his has the 3.3L inline 6 in it and we aren't going to change it, We are going to rebuild it, Well HE'S going to rebuild it by the manual while I watch and then check his work as he does it and unlike what I promised him I'll buy the engine rebuild kit, I can get a master rebuild kit from Cleegs Engines for $1000. I originally told him no but I told him I would spend 2k we bought the car from buddy who sold it to us for $500 so I figure he has $1500 in parts coming.
@@TheInfamousProject Yep, exactly why I did it plus since he'll know how much blood sweat and tears went into he won't drive it like a jackass and tear it up.
Wow Come & Take it came out great Chris. Really love the interior choices you made, electric door locks and windows were a great touch, the blended blue and black interior look awesome, agree with you some black upgraded seats would top it off. I really like the pin stripe side, i think add something to the look. Great job bud, you hit it out of the park.
i know this vid is old but i like the pinstripe. back then all cars had pinstriping on them. good to see you dont have the red interior. to me theres nothing worse than red interior in anything. that is a clean notch though for sure. im lookin at one now that has a fresh 351 build that has never ban ran since rebuild and also comes w a novi supercharger also in white. it used to be a service car and has the 160mph speedo as well. the issue i have is the guy removed the fi wiring and everything associated w it. there is 5k on the novi supercharger kit. he bought the kit new and blew the 302 then built the 351. has afr cnc heads 650 carb bunch of stuff victor jr intake etc. body is supposed to be clean dunno for sure. he drag raced it but has the interior. also has a lentech aod trans. if i do get it i will swap it to a stick. my biggest concern though is what to do in regards of the missing wiring. hes askin 5500 for everything which doesnt seem too bad tbh. that wiring scares me though as its all gone. any tips on that one? id much rather have fuel injection.
My grandmother has my moms first car which is a 89 2.3 aid and I want to do pretty much the exact same thing 2.3 to 5.0 it’s been sitting for 21 years and I have photos
I have a 91 gt that’s just about done at the body shop. Gonna need some interior restoration. I’m in Louisiana, man I wish I could bring the car to you and just pay for your touch.
Debating buying the cleanest shell I can find for 1k no rust at all. But it’s fully gutted, still has 4cy rear tho. Really debating it, not scared of the work.. at all, or the money. More so timing of taking the 1k on the shell right now. But think may be worth it to build from ground up with my som
nice looking finished project. Question, how to fill/remove the front license plat holes? It kind of stood out on your white coupe. Here we don't require a front plate and I know alot of dealers would mount their own dealer plate on the front which meant drilling those holes. I just wish I knew of a good sure fix to ride the front of my coupe of those holes.
fox owner here, too. Umm, math with spare parts you have left over. not really 10k car. the average person interested in foxes doesnt have a 'parts car'!
HELP!! Bought a 89 4 cylinder coupe roller and don’t know where to start(where to get engine/trans, Detailed Step by Step installs)...no rust, straight body, stripper optioned.. Cluster is swapped, looks to be a 8.8 rear end, A9L computer, flowmaster catback, interior is there, most of the wiring. Not sure what are the other main differences, like the headlight harness, brake booster, suspension, etc Thanks 🙏
Been trying to find a coupe(that runs and drives this time) and I haven’t found a coupe that’s not a rust bucket or junk for $10-11k 😑 I’ve lived on Facebook marketplace for 2 weeks, forums, facebook pages everyday and not a sniff… I’m on the east coast
My brother had one of these things, he put a built to the ass 351 in it. It was his daily driver, it was BARELY legal! High 9s it ran. He took me for a ride one time around the block, that thing was just pure EVIL!
I have the opportunity to buy a strawberry true 40E coupe factory 5-speed car. It has 160,000 miles. Paint is about 8 out of 10. Interior is super nice. Guy is asking $7500. Is it worth it?
@@TheInfamousProject thanks for the super quick response. I need to pull the trigger on it ASAP. I know they don’t sit long. Just wanted to make sure I wasn’t making a bad decision.
I just bought my 93 GT 2 weeks ago, it’s a completely rust free true 88K mile car. Interior is 9/10, paint is like an 8.5/10. Black on black interior car. Still has the cats, smog system, egr everything is stock. I payed $10K for it.
I'll give you 14 for it lol
@@TheInfamousProject I'm buying a 89 25th anniversary edition 5.0
That was a steal, 👍🏼Good Job 👍🏼
@@TheInfamousProject come to Indiana and it’s yours lol I’ve always wanted an 96-98 Cobra. I’m hoping next year I can get my hands on one to park along side the fox
@@brycycles95 email me info plz. You can contact via my website
The LX 5.0 has always had a place in my heart. Such great memories from my childhood!
Dude I love how simple and clean this is.
Glad you like it!
Awesome job man! I went absolutely crazy restoring my 92 GT's interior and nothing makes me smile more than knowing that "I" did that when i get in the car. I'm chomping at the bit to pull my motor/trans but space is tight and funds are limited. Love the channel.
Hope u finish the proteyect if don’t do not loose the fate
One of the top dogs in the Foxbody game! Great vid as always!
These Fox Mustangs were my childhood generation. I’m 41 years old and my dream is to find one of these someday. Coupes are awesome but I’d go with either a hatchback or convertible soft top. I also like the 5.0 GT too.
New subscriber here from Michigan!...just picked me up a 89 Scarlet red notch rust free that was a 4 cylinder car and it's been 460 swapped...I saved the car from becoming a drag car...I got real lucky and the guy I got it from saved all the interior parts that took me about a half hour to reinstall...I plan on getting rid of the 460 and c6 that's in the car and going with a fuel injected Windsor power plant for my build....I kicked around a coyote swap but I'm leaning towards the Windsor instead....but cut a long story short I paid 5700 for my notch because of how clean it is....these notches are getting hard to find that aren't complete drag cars so I'm glad I finally found one....I've owned a ton of hatches but I finally got the notch I always wanted!...it was definitely worth the 5700 dollars I spent for my car.
I had a white hatchback that I bought back in 99 when you could buy one for $1000 with a bad transmission. I converted it to manual which was pretty straight forward. I’ve been looking at a few clean 4 cylinders and considering this conversion 👍
Id be happy with that 4cyl conversation any day of the week. Amazing work as always
I love your collection especially the 86-4-eye
I watch some of your vids in reverse. The ones in the past that I missed. That notch turned out so dope. It looks awesome.
Thank you sir
Every project takes time and $$$! If you’re not going to spend both someone will buy your project cheap! That’s why buying your project cheap is key, and have a straight body with no rust is key! Keep um coming and keep um running!
Chris you are living the dream. Another awesome notch.
Knowledge is power! I spent way more fixing a 06 BMW 330I then the car was worth but now I know a ton about E90s and no one can take that away from me except if demensia kicks in!
Ya I need to do some maintenance to my 335. Rattling waste gates and some vac lines need replaced
@@TheInfamousProject that's going to be my next daily driver. I'm on my 2nd 330. Never even knew the difference in models but now I need twin turbos 😆
Fantastic job ! No matter if it was a 4 cylinder doesn't matter it's still another foxbody saved and running !
That blue interior is underappreciated. Same with the red. They look really nice when clean and bright.
How times have changed...
I bought my 1989 1//2 5.0 5-speed LX notch BRAND NEW for under 10k, I still had room to purchase my Flowmasters, Saleen wing and Ram Air hood from Cervinis ( I saved a lot by picking up cuz I live in NJ) The Steeda ground effects put me over the10k.
I kept the special sport package (140 mph speedometer 89 😜) stock color 'Almond' because it was an absolute sleeper, especially with the tint. ARE BBS Mesh rims in black were added.
In December '91 I did a 5k value custom paint job in a Fuchsia pink with a blue pearl in the clearcoat... I could have never afforded it, but I paid for supplies, my brother is a professional auto body painter who specializes in custom paint. I LOVE my Pinkpony! I've been enjoying her for daecades! yes, I still have her and she is about tonbe rejuvenated! Over 30 years and only on my 2nd set of Flowmasters and 2nd clutch ..... We won't discuss how many sets of Gatorbacks I have turned into slicks 😜 ... Lol this Mama doesn't play! I still have only 93k miles, somehow less than my '06 Explorer 🤷🏼♀️ go figure
I just bought a 88 notch with fresh black paint. Now that I've been watching your videos I'm finding out it's not as great as it looked. They didn't remove any trim just painted it all black but thankfully the guy used straight black base and clear so I can match the paint easily when I go to do the jams ect. Right now I'm trying to get it cut and buffed and ceramic coated but yeah I touch it and it's smeared. I love/hate black! YOU INSPIRE ME
This project had a nice arc. Its easy to miss where it started vs where it ended with the other projects in between but who's going to complain about too many fox projects!
Lol that's what the playlist is for!
Great job Chris! That’s the way to do it. Old school car building. @Louis Avello he converted it to power windows! Lol.
NICE UPDATE MIJO! That car turned out fantastic, and on a decent budget! You should do a feature on those perfectly placed, equal length, no wheel hop lines in your driveway! Had to be a well-built car that did that! :-) In all seriousness, that notch was a great story.
Love the white color, really nice build so far. thats a solid 8-9k car
I reworked about 65 percent of my 93 notch a few years ago. I bought the lettering and stripe kit from lmr so the mustang on front and rear bumpers is blacked out, the strip in the belt molding was changed from red to black as was the pin stripe. at the time I didnt have the money to buy a compressor and a paint gun so it was shot with duplicolor color match rattle cans. I of course worked it just like you would if you used a compressor all the same prep work, then a wet sand and buf when done so it really doesnt look like a rattle can job. I also didnt the smoked head and tail lights, and Used the peel coat to put a black metallic coat on my wheels. the v down the middle of the hood was flat black when I bought the car when i refinished the hood it was painted metallic black and a boss type hood scoop was installed. It isnt a show car but it snaps heads and is fun to drive even with the 4 banger still in place. At 183k miles she still purrs like a cat and runs down the road like a dream. last year I had the front brakes, calipers, hoses, pads all replaced so she stops right again. I also had the bushings, ball joints, rack, and rag joint replaced so it really drives nice now. Next up is getting the new hood, one fender, front and rear bumpers, a trunk lid, sub frame ties, 8.8 rear, tubular k member, the 5 lug conversion kit, march pulley set up, a few fuel tank, lines pump, etc and the guages so I can install the 480hp 351W sitting in my dads garage with the c4 race prepped trans and converter. It all takes time when your coffers arent real full. We call it the Big Fat Panda with license plates to match.
Im just happy that after years of sitting outside we have finally bought our own house and the garage hase enough room for it to have its own parking spot
Well said. Good looking car ! Love the wheels
I love this car bro. So smooth and a great deal on everything
The car turned out great! I am doing something similar with mine. I bought a low mileage 4 cyl 5 speed notch and I am the 2nd owner. It is super straight and has a newer paint job. I had a GT I bought years ago and it was a major project. I decided recently to part out the GT because the last owner beat the hell out of it and did some suspect things to it so I will use the parts for the notch. All together I would say I have about 6k in to it. At the end of the day the car will be what I wanted. Even if it was a original 5.0 car I would modify it anyway so I don't see what the big deal is why people give negative feedback between 4 and 8 cars.
What u going to do with ur 4 banger engine??
This one actually was a roller but typically I sell em off to guys that do some bracket racing
@@musclecargarage8882 I will probably be using it for a while since it runs great with 78k miles. I will probably upgrade everything around it until I get another motor since the one in my GT wasn't in good shape and I need to get another one.
@@jamessalter676 oh ok. Mines runs ok seems pretty slow and it got 144k miles i think. Do u have any issues getting up to speed like 60 to 80 miles an hour??
@@musclecargarage8882 lol they are pretty slow and gutless having 89 hp. I haven't done any daily driving with it yet. I have probably got it up to 60 on the back roads without a problem. I just drive it normal for the most part. The 5 speed I am sure helps better than the auto would. I did squeak the tires once doing a U-turn 😆
I don’t care what anybody says that is one beautiful bad ass notch …
The car turned out great! Good info on how to get a project done at a reasonable price! I appreciate the time and work you put into your videos.
Thank you sir
DUDE I THINK IT IS AWSOME TOO HAVE A FOX THAT ISN'T PERFECT THAT YOU CAN DRIVE AND ENJOY LOL LIKE MY VIBRANT RED 93 COBRA I CAN'T DRIVE IT AND ENJOY IT LOL IT HAS JUST OVER 20THOUSAND ORIGINAL MILES AND ALL ORIGINAL EXCEPT FOR THE EXHAUST AND THE PAINT IS ALMOST PERFECT AND YOU KNOW THERE ONLY ORIGINAL ONCE LOL I LOVE TOO FIND A BLACK 93 COBRA THAT NEEDS TO BE RESTORED SO I CAN MOD IT AND DRIVE IT AND ENJOY.
Definitely agree with you about finding a fox that doesn't need a complete respray paintjob. The days of getting a nice $4000 paintjob is long gone. PDR and a good paint correction goes along way to get thinks started
Okay I’m digging this thing for sure it’s growing on me definitely good buy, these are the better looking stangs the knotch in my opinion.
I just bought a couple weeks ago eh Canadian Lx 5.0 up here for $500 170k sat for 11years but it's kind of a rust stang but I can fix it n make it a daily driver after watching your videos thx
Oops 91 Lx
Very inspirational, great video, thanks!👍🏻💪🏼
My pleasure!
Another Notch on the belt Chris haha... awesome job homie. Hope to see more of your great work🤙🏻
From what comes thru the video You did a Fabulous job!
Appreciate that
THAT CAR WAS MY ONLY LX I EVER HAD HONESTLY BESIDES MY 93 COBRA THAT I LOVE AND WILL NEVER SELL LOL I WAS NEVER A REAL BIG FAN OF THE LX MUSTANGS I HAVE AND LOVE THE MY 87 GT WITH T TOPS I HAVE AND EVENTUALLY IAM GOING TO BUY A 89 OR 90 WHITE MUSTANG GT SUN ROOF 5SPD AND A BLACK CLOTH INTERIOR.
Great vid thanks I was looking for a vid like this thanks
Nice car and driver. Well worth the effort Chris.
👍
Love your content! 10k not including a clean fox correct? My definition of clean is a Foxbody in very clean condition cost 16-18k. 6k gets you a roller ready for paint.
Miss my 90 notch. Low miles and all stock 5.0. Only needed paint and seals. Florida car. Sold it for $2k in a jam figuring id get another. Nope. Prices skyrocketed and now i afforded a 94 gt. I like it but my true love is the fox 😢
I just purchased a bone stock 93 LX convertible. Not a spec of rust. Very clean body and interior for $7500
That's a super clean conversion 👌 You should get rid of the lonely drivers side pin stripe... The passenger side without looks cleaner.
That’s such a clean and sexy notch. I personally wouldn’t do much more to it because I’d just want to drive the hell out of it.
Great video thanks 😊 for sharing!! I’ve been thinking about converting my power windows to manual. I’m glad you went over the conversion, I didn’t the arm rests were in a different spot!! Of course my car is a 85 SVO, so I’m not sure if any of the information pertains to the earlier fox’s. Great looking build. I’d wheel it everywhere!! lol 😂
What color car? I have an 88 with manual windows. I want power. Hint hint.
The white blue gut notches hands down my favorite
I like your style
YOU KNOW THERE WAS SOMETHING I WANTED TO ASK I HAVE A SET OF THE DEEP DISH STEEDA WHEELS THAT EVERYONE WANTS TO BUY FROM ME DO YOU KNOW THE RIMS IAM TALKING ABOUT.
Always great videos!!!
I just bought my Grandson a 1981 Mustang for his 13thbirthday, his has the 3.3L inline 6 in it and we aren't going to change it, We are going to rebuild it, Well HE'S going to rebuild it by the manual while I watch and then check his work as he does it and unlike what I promised him I'll buy the engine rebuild kit, I can get a master rebuild kit from Cleegs Engines for $1000. I originally told him no but I told him I would spend 2k we bought the car from buddy who sold it to us for $500 so I figure he has $1500 in parts coming.
Nice! That's awesome you are getting him into a project like that at his age! Best learning experience he could get!
@@TheInfamousProject Yep, exactly why I did it plus since he'll know how much blood sweat and tears went into he won't drive it like a jackass and tear it up.
Wow Come & Take it came out great Chris. Really love the interior choices you made, electric door locks and windows
were a great touch, the blended blue and black interior look awesome, agree with you some black upgraded seats
would top it off. I really like the pin stripe side, i think add something to the look. Great job bud, you hit it out of the park.
Can you do a video on how to eliminate egr and not throw a check engine light? Thanks
i know this vid is old but i like the pinstripe. back then all cars had pinstriping on them. good to see you dont have the red interior. to me theres nothing worse than red interior in anything. that is a clean notch though for sure. im lookin at one now that has a fresh 351 build that has never ban ran since rebuild and also comes w a novi supercharger also in white. it used to be a service car and has the 160mph speedo as well. the issue i have is the guy removed the fi wiring and everything associated w it. there is 5k on the novi supercharger kit. he bought the kit new and blew the 302 then built the 351. has afr cnc heads 650 carb bunch of stuff victor jr intake etc. body is supposed to be clean dunno for sure. he drag raced it but has the interior. also has a lentech aod trans. if i do get it i will swap it to a stick. my biggest concern though is what to do in regards of the missing wiring. hes askin 5500 for everything which doesnt seem too bad tbh. that wiring scares me though as its all gone. any tips on that one? id much rather have fuel injection.
It’s my favorite car of all years
Great looking car man!!! 6k?? Thats a steal for sure!
My grandmother has my moms first car which is a 89 2.3 aid and I want to do pretty much the exact same thing 2.3 to 5.0 it’s been sitting for 21 years and I have photos
Chris , with the stock camber plates and coil overs , where you able to get the proper alignment?
I have a 91 gt that’s just about done at the body shop. Gonna need some interior restoration. I’m in Louisiana, man I wish I could bring the car to you and just pay for your touch.
Nice car that one came out really nice.
I miss my 93 black in and out notch oem v8 .. congratulations I like to have one again… even though having 2021 Durango hellcat..
Wow this 5.0 sounds good, even over laptop speakers! LOL
My dream car as a kid teenager 😊
Debating buying the cleanest shell I can find for 1k no rust at all.
But it’s fully gutted, still has 4cy rear tho.
Really debating it, not scared of the work.. at all, or the money. More so timing of taking the 1k on the shell right now. But think may be worth it to build from ground up with my som
Car looks clean and sounds clean. What kind of Bluetooth did you decide upon?
That’s a beautiful car!
Thanks
@@TheInfamousProject of course
You good at building them
Hood pins always on these. I've had 8 , 4 coupes, once you have none or sell your "only child" it feels like you've lost your left arm.
Best thing about it…no fancy wheels or ugly body kit. Just a clean nice notch
I would love to have that car!
Swaping a t5 into my 79. Which headers will work the best with the cable and fork clearnce?
nice looking finished project. Question, how to fill/remove the front license plat holes? It kind of stood out on your white coupe. Here we don't require a front plate and I know alot of dealers would mount their own dealer plate on the front which meant drilling those holes. I just wish I knew of a good sure fix to ride the front of my coupe of those holes.
Expoxy for urethane bumpers...
Love her man❤
fox owner here, too. Umm, math with spare parts you have left over. not really 10k car. the average person interested in foxes doesnt have a 'parts car'!
Have an original 89. Some light passenger frame damage. Interior 10-10. 48k miles maybe second turn. All paper work.
Wanna buy it.? Be good for your channel
Took the yellow headlights out? Looks like it came out great overall. Nice job.
Man you don't play.. great job
Thanks
What nice job on that car I mean it I would cherish that cutie
Im just trying to make my 4 banger 92 coupe a reliable daily driver with a few upgrades
I’m looking into buying one myself , have any videos on LS swap ? I’m looking to do a ls swap big turbo setup
No LS lol
Wow do my coupe next 💯🔥
HELP!!
Bought a 89 4 cylinder coupe roller and don’t know where to start(where to get engine/trans, Detailed Step by Step installs)...no rust, straight body, stripper optioned..
Cluster is swapped, looks to be a 8.8 rear end, A9L computer, flowmaster catback, interior is there, most of the wiring.
Not sure what are the other main differences, like the headlight harness, brake booster, suspension, etc
Thanks 🙏
Check out some of my newer vids.. did a complete v8 swap
Nice car
Just picked up a 89 hatch for free cause my friends were moving they said if I can come pick it up I could have it needs motor and trans but rust free
Not a whit car kinda guy but that is nice 👍🏻 your living the Dream .
Wow, blue interior?
Manual windows?
It have AC?
I’ve had notches and I don’t get the obsession with them. Yes, they’re lighter but they do not look as good as a well done lx hatch or GT.
Around how much would be tow swap a 4 cylinder to 5.0 I just found a notch back but it’s a 4 banger.
Depends on the donor car you find...
Forever Fox 🦊 good video good point.
Love to own it not to much under hood 450 to 500 hores power less but standard to lower it bit more just fun guy and u got good deal
Which do you have for sale...?
I vote ditch the pin stripe, that is a sick car for 10k.
Thanks bro appreciate it!
Killer 5.0
You no longer living in Canada? No shop in Texas?
Been trying to find a coupe(that runs and drives this time) and I haven’t found a coupe that’s not a rust bucket or junk for $10-11k 😑
I’ve lived on Facebook marketplace for 2 weeks, forums, facebook pages everyday and not a sniff…
I’m on the east coast
Gotta find the ones not posted!
Texas is the greatest country just needed to add that lol
Agreed
5 lug conversion..Was that alot$$?
I'm thinking there is only one door and all the holes are there already.
My brother had one of these things, he put a built to the ass 351 in it. It was his daily driver, it was BARELY legal! High 9s it ran. He took me for a ride one time around the block, that thing was just pure EVIL!
4cyl cars are better in a lot of ways because they were never abused. Torque boxes and some many other things I’m not going to bother getting into.
It's a gud car to start w. Better then a ratty one. Nice paint. F pl. Notch n jus swap motor.
Wonder what you could get for it? $15? $20?
I have the opportunity to buy a strawberry true 40E coupe factory 5-speed car. It has 160,000 miles. Paint is about 8 out of 10. Interior is super nice. Guy is asking $7500. Is it worth it?
More than he's asking
@@TheInfamousProject thanks for the super quick response. I need to pull the trigger on it ASAP. I know they don’t sit long. Just wanted to make sure I wasn’t making a bad decision.
@@johnnybravo6047 if you don't take it email me the details lol
@@TheInfamousProject will do. It’s located in upstate SC.
Oh man. The paint on mine is BAD. 😂😂😂 Might just wrap it one day tbh.
vanilla ice is at the door he says hes got something for you
Dang bro 💀