Oh REPOS! I got sent over to Alabama to pick-up a 963 loader and return it to the rental yard. They told me the loader needed to be off the lot because they were bringing in a modular building and would be bringing a crane so they told me to load at dawn. When the contractors's fuel truck arrived to fuel and grease machines, a quick conversation made me aware this was a repo, not a regular move. I was already loaded so I pulled out. Just before I got to I 20, the boss and two other pick-ups spotted me. I got on the interstate and with my 600 HP and tall gears, they couldn't keep up. I kept going fast to the Georgia State Line. Oh repos!
Hi bud ! When lifting some of those sheds,do you sometimes come across some critters,such as snakes,wasp hives ,skunks or raccoons ? I"ve been watching for a little while your videos and subscibe to it,but I've never seen any videos that mention any of the aboves. Thanks for the answer.
I have been watching your videos for quite some time now! Well I was taught at an early age if you can't say anything nice don't say anything at all . But I can say that what you complain about in this video you have said it before and taken care of by you. So I have faith in you that you can take care of it !
That's your scariest video yet. The used syringe in the grass behind the shed. Your expertise and skill can handle anything and your thinking always finds a way. But then you run into stuff like somebody's used needle you might not even see. Yikes.
There is no reason for a shed to be built on 4 x 4 post. They should be a minimum of a 4 x 6. And they should’ve had a 2 x 12 double up above that rollup door.
Wow that shed was not built well. Did you say at the beginning of this video thats a new mule. Is this an older video or did you get another track mule? I know the other one wasn't that old remember the video when you got it.
Someone got conned into one of those clothes or accessories pyramid schemes. Then found out no one wants to travel to a run down house in the country to buy junk. Couldn't pay on it any more, came up with a racket saying it was junk to save the repo on their credit report.
My Moto Is & Has Always Been, ONE TIME RIGHT I TOTALLY understand What You Say About That Shed & They Probaly Even Charge More ? , But I have A idea, IF You Got Some Probably 4×4 Angle IRON THAT YOU COULD SLIP UNDER EACH END& A PIECE ABOUT 3 or 4 feet Long For Each side & Bolted Them To A 3 or 4 inch Flat Bar it Would Give You A Good Solid Lift Place To Lift Drag Or What Ever But You Might Need To Run A couple Lag Bolts Through Them Also But You Wou l d Be Able To Get It For Sure & Store Them With Your 4×4 in Your Trailer ??? 😉👍🇺🇲
It's loaded, but better not hit any bumps or it's liable to just break into pieces. There were no cross members. I'd refuse to deliver that again just because it would be dangerous to haul.
T-111 is trash to begin with, the back end is buried in dirt. Osb. Hollow interior door on the exterior, all corners cut bare bones If they made 2 years payments it probably paid for construction and delivery. Someone is going to be buying a floppy repo shed next
was it even worth returning? can't help but wonder if the boards you removed from both the front and back wouldn't have Helped hold it together some..i'm aware they didn't belong but maybe coulda helped ya a bit.
You know the moto more profit so they build them to make money not to sale you any quality. That why I always tell people DONT BUY A STORAGE SHED at a buy here pay here better off building your own save money big time
I have a 12x24 barn shaped roof 12 foot tall i need moved. Being it has lofts in it, my local guy says he can't move it from Louisiana to Mississippi without a permit because of the lofts,and has to have LA state trooper escort. Does this sound right. I watch videos of you and others hauling way bigger units than mine and never a police escort. It only has to go 40 miles. They said if it didn't have the lofts, they could move it, without permit and escort.
@@papabearcamaro Turning down the VOLUME reduces the sound of the voices and machine sounds as well. Not a good thing. There's this thing called "don't be a dick", try it some time.
True professional to get that shed on the truck without destroying it. 👍👍👍
Oh REPOS! I got sent over to Alabama to pick-up a 963 loader and return it to the rental yard. They told me the loader needed to be off the lot because they were bringing in a modular building and would be bringing a crane so they told me to load at dawn. When the contractors's fuel truck arrived to fuel and grease machines, a quick conversation made me aware this was a repo, not a regular move. I was already loaded so I pulled out. Just before I got to I 20, the boss and two other pick-ups spotted me. I got on the interstate and with my 600 HP and tall gears, they couldn't keep up. I kept going fast to the Georgia State Line. Oh repos!
😄😃
Built like a house of cards. Cutting corners to broaden the profit margins never works for long .. Hope it held together for your back trip!
Spray a little dish soap on the trailer. Used that a lot on my fifth wheel slide. Good Job!
You should keep a bottle cheap dish soap to put on the trailer runners when its dry like that they slide right on !
Spectrum Kills AT&T every time. AT&T Sucks! and nice video.
AT&T Rocks! Just had them out today to Upgrade to 500mg High Speed Fiber Internet. 👍
What a great job. Hope your company pays you very, very well. God Bless. Drive safely. Love these Videos.
Awesome video and shed move. Glad that you know how to move the sheds/buildings. i wonder who designed and built the so called building/shed.
Haha. That made my day seeing the Spectrum truck then the video saying sponsored by AT&T lmfao 🤪
I wonder if those boards you removed on the bottom should have stayed attached for the mule to grab onto?
Always frame in larger openings or give some sort of support you gave the building way more stress than it needed to be under.
What you have to put up with! Whew! Thanks.
I think the only thing that's keeping the Front together is that "Diamond" Plate Threshold!
This is addicting
Thumper down and bogey wogey , I've got to remember that one 👍
Hi bud ! When lifting some of those sheds,do you sometimes come across some critters,such as snakes,wasp hives ,skunks or raccoons ?
I"ve been watching for a little while your videos and subscibe to it,but I've never seen any videos that mention any of the aboves.
Thanks for the answer.
Used to watch the other guy wyble family adventure's your videos are much better keep up the good work and keep them coming
they need to make an R2-D2 sticker kit for that Mule.
Great job for a crappy shed. They were lucky to have some one with your know how so they didn't have a pile of junk left behind.
Just because it was built by Amish doesn't mean it's rock solid to move around anytime.
All of those hydraulics and you still have to lift off/on those wheels from your machine. Thats a Bummer.
I have been watching your videos for quite some time now! Well I was taught at an early age if you can't say anything nice don't say anything at all . But I can say that what you complain about in this video you have said it before and taken care of by you. So I have faith in you that you can take care of it !
Thanks for the T-shirt Josh 😊😊😊😊....was a great surprise!!
You're welcome man.
That's your scariest video yet. The used syringe in the grass behind the shed. Your expertise and skill can handle anything and your thinking always finds a way. But then you run into stuff like somebody's used needle you might not even see. Yikes.
I used UHMW plastic for my trailer. Slipperyest stuff on this planet.
Hey look they even have the Oversize vehicle escort to help you on the way out!
Awesome video as always!
That music is so cool!
You guys are amazing!!!
You should carry some 2x10 or even 2x8 just for this type of problem. It's insane to build something so weak.
He has a bunch of wood in the storage box under the lift up trailer.
@@bhager but is it long enough?
Looked to be a test of patience
Great job 👍
Hard to Believe for the Amount of Money these Sheds Sell for that they Don’t hold up Better when you try and Move them for only the 2nd time. 🤪👎
Engineers build them but don't move them. Could have destroyed that pretty easy. Thanks to your expertise you saved it. Nice job
There is no reason for a shed to be built on 4 x 4 post. They should be a minimum of a 4 x 6. And they should’ve had a 2 x 12 double up above that rollup door.
Customer added garage door? Hope you closed it before travel. Need a big claw hammer on board and pry bar.
RUclips thought I needed to watch this. They were right.
We have Yoders here in eastern NC. They're Mennonites. Similar to Amish.
would shutting the garage door helped or no
Good 👍
I didn't think that shet was going to make it
some days a job is alittle more than a job , you have the tools but doing the same job twice must suck a bit. Deliever and repossess.
Build junk and screw the guy buying it
On this video, wouldn't the shed door come down? It looked like that would be a bad drag on your truck pulling it.
Always enjoy your videos, I don’t get why you didn’t close the over-head door to give it more stability?
Only thing AT&T would sponsor is their own poor customer service
Wow that shed was not built well. Did you say at the beginning of this video thats a new mule. Is this an older video or did you get another track mule? I know the other one wasn't that old remember the video when you got it.
Why didn't you close the door? Or for hwy safety load it backwards?
And you need to get yourself a boxer screws 3 1/2 inches long and a cordless saw do some shoring up on some of the sheds before you move them move it
That must be one of those “ fall apart sheds” I hear about….😂
Who screws a flimsy *** piece of trim to hold a fence gate on from both sides ? 🤪👎
You think he had enough screws in that board?
Someone got conned into one of those clothes or accessories pyramid schemes. Then found out no one wants to travel to a run down house in the country to buy junk. Couldn't pay on it any more, came up with a racket saying it was junk to save the repo on their credit report.
My Moto Is & Has Always Been, ONE TIME RIGHT
I TOTALLY understand What You Say About That Shed & They Probaly Even Charge More ? , But I have A idea, IF You Got Some Probably 4×4 Angle IRON THAT YOU COULD SLIP UNDER EACH END& A PIECE ABOUT 3 or 4 feet Long For Each side & Bolted Them To A 3 or 4 inch Flat Bar it Would Give You A Good Solid Lift Place To Lift Drag Or What Ever But You Might Need To Run A couple Lag Bolts Through Them Also But You Wou l d Be Able To Get It For Sure & Store Them With Your 4×4 in Your Trailer ??? 😉👍🇺🇲
It's loaded, but better not hit any bumps or it's liable to just break into pieces. There were no cross members. I'd refuse to deliver that again just because it would be dangerous to haul.
have you ever had one fall apart and you just leave it?
I have not
That shows how all these "buy here pay here" barn places are selling mass-produced junk. WOW!
Maybe the costumer know it was boult bad maybe that's why he had those bords screwed from both sides to keep it together
What happens to these repossess sheds? Are they resold or scrapped?
Resold, and they sell fast cause they are discounted
I take it you made it to your destination? It looked like just a few bumps on the road and it would fall to pieces.
lol If i were a carpenter... I would be fired hahaha
Just out of curiosity why don’t you carry an extra set of wheels ? Wouldn’t that be a lot easier?
T-111 is trash to begin with, the back end is buried in dirt. Osb. Hollow interior door on the exterior, all corners cut bare bones If they made 2 years payments it probably paid for construction and delivery. Someone is going to be buying a floppy repo shed next
How much weight can that machine move?
Who built this shed?
was it even worth returning? can't help but wonder if the boards you removed from both the front and back wouldn't have Helped hold it together some..i'm aware they didn't belong but maybe coulda helped ya a bit.
No they really wouldn't have help, good though tho.
@@ShedHappens "thought" But we love you...well...just because!
They didn't make it easy for you, did they?
Does this make any sense about the lofts?
You know the moto more profit so they build them to make money not to sale you any quality. That why I always tell people DONT BUY A STORAGE SHED at a buy here pay here better off building your own save money big time
You should post the name of the builders of that shed so that they can be blackballed! That was horrible construction or lack thereof! 😐👎
It’s definitely not a Yoder toter…
If they would have just put a LITTLE more effort in the construction...
I have a 12x24 barn shaped roof 12 foot tall i need moved. Being it has lofts in it, my local guy says he can't move it from Louisiana to Mississippi without a permit because of the lofts,and has to have LA state trooper escort. Does this sound right. I watch videos of you and others hauling way bigger units than mine and never a police escort. It only has to go 40 miles. They said if it didn't have the lofts, they could move it, without permit and escort.
That sounds like it qualifies for Midnight Move status. One of those After Dark jobs....
Take that trim off you wouldnt want him calling saying you took his trim.
👍👍💓
That did not look fun at all!
Kinda still amazed people finance a shed? What do these things cost?
Sponsored by AT&T internet then you go buy a spectrum van that is kind of funny
That building don't look very old it's supposed to be a well built building
Where's your WD40,?
Good question
old video no green grass there now
Put some braces in there like when the build and deliver
I think the Amish build them better than anyone
Well worn myth.
Are you AWAREyour name. She’d happens is used by a former Amish lady?
She treats him well enough.
Not going to subscribe if we never see you
Getting tired of looking at the ground, would like to see what is going on, what you are doing, not looking at the ground all the time.
So why is it he and her have the same accent? Is it a Amish accent?
Yes
No offense to your escort/helper, but he's not really doing much to help.
Looking for 16x40, 16x32, 14x36 hmu
Please,please set up camerS...the one on your chest shows your shoes and legs...you could have better videos with cameras...let's get going,please.
Please leave out the very annoying music.
😭
There's this cool thing called volume, try it sometime.
@@papabearcamaro Turning down the VOLUME reduces the sound of the voices and machine sounds as well. Not a good thing. There's this thing called "don't be a dick", try it some time.