Rebuilding a Wrecked Jeep Cherokee SRT! Part 7 Engine installed!!
HTML-код
- Опубликовано: 16 окт 2024
- Welcome back to 23rd Garage, we are back on the Jeep Cherokee SRT and in this video we install the engine and some of the suspension componets. If you haven't been following along on this build, check out some of the previous videos to get up to date on what is going on with the Cherokee.
#jeep #cherokee #srt #rebuild #salvage
![ARGENTINA vs. BOLIVIA [6-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/C3wPtKNbAOA/mqdefault.jpg)
Cats supervision is priceless!!!......
"Kat" was just "chillin' "!!
There is a tool for the strut bolt. It is nearly identical to what you built except has flat spots on the outside of the large socket to hold it with a wrench. Well done for sure!
Excellent work putting the Jeep back together Yuri.
I don’t know how this guy can remember where each wire goes and each nut and bolt . I know there is probably tons of pics but still it was stripped of almost of every thing these guys are really good and very smart at their jobs good work
Yea def not easy
A man, a forklift and family, endless possibilities. Doing good dude, it’ll be done soon enough.
Building that engine back on the car was a delicate operation, but because of great craftsmanship everything was fitting like a glove ! And even your father was happy about it ! Compliments Yuri !! Love to see how things are coming together and finally this Jeep will be out of the Shop ! Cat is doing great as a Inspector !
Don't fully collapse the spring away from the upper and strut mount and lower spring perch leave some tension so the strut/shock ram can't spin, and you can zip the nut off and back on again.
Paul, back from location shooting, in Hollywood, takes time to lend a hand.
whats up my friend waiting for those new videos great as usual shout out to CAT ....🎉🎉🎉🎉🎉🎉🎉
Hilarious timing! I dropped my phone and when I picked it up, you’re shirt was gone 🤣
Let’s be honest here Yuri, without Kat’s supervision and expertise you couldn’t have got it done!!😂
Love the comment about trolls in the comments, gave me a laugh. Tell Cat I said hi. Genius on the strut removal.
Yuri, here is my troll. The cat needs a bath. LOL!
That is a nice feeling when the bolts line up.
You are one hard working person.Another great video
That cat rules✅️ great job 💯💪🇺🇸👍
Usual magic, no smoke, no mirrors, great work. You need to come to the Lake and cool off, knock out those jobs ASAP. So what's you and Paul's cut on the Silverado?
I'm glad to see KAT back in the videos. He is a hard worker. . love the videos
Another great build. Love the comment about missing the trolls, so funny 😂😂😂
Great work. Kat scanned for quality too.Someone's been eating their Wheaties for breakfast ;)
Seeing all of those cables and wires going back home was very satisfying Yuri!👍
Dude, awfully lot of work with this one, respect! 😮
Watching that big ol 6.4 hemi go in was like 50lbs of shit in a 4 lbs box😂
great job. you have practically assembled a whole car, genius
Thanks for sweating through it all for us.
I like the fact that you clean the parts as you are installing them. Very neat
Brilliant as always 👍🏻🇬🇧
Get yourself a pass-through socket set for the strut bolt if you want the correct tool. Good for some other uses also.
It's important to know when tobstop for the day and pickup tomorrow.
Engine looks more steady done like that.
Looks awesome bro.
Cat has been into vehicles in a past life
Let’s gooo! So pumped for this thing!!! Your dedication on this is wild!!! Proud of you
Hold on to that 6.4 hemi SRT Jeep. It's value is climbing rapidly due to the discontinuation of the Hemi's. The engine alone is worth a pretty penny due to not many of them were produced compared to the 5.7 Hemi,
Bahahahaha cat don’t give a shit he’s a tiger love it
good!
YURI = Professional, Bradley too😂
great stuff thanks
Nice 😎😎😎👍👍👍
Them Milwaukee impact are great with torquing 😁 nuts and bolts hint, hint, . I know y'all going back and torquing the subframe and transmission cross member bolts to a whole lot more uga dugga's🤣😂
im thinking you need a socket that has a hex head top on it so you can use a racheting wrench and a socket rachet to put that cap and nut on ...basically what you were doing with the vice grips..sort of like this socket 3/8" Dr. 5/8" Spark Plug Socket ...so you can hold it with the wrench and rachet through the center at the same time...
Kat ain’t givin a F about OSHA regs.
There is a socket with a hole in the end so that you can use the other tool. Someone already thought of it.... ;)
Yuri, maybe make a new stronger grille for that shop drain?
tnx for the video
Does the cat go home with you or is he 24hr security at the shop? He really attacked the phone, lol. SRT is almost done. Excellent Content as always! Do you use a Port a cool at the shop?
before you clamp the spring loose the nut a little bit then clamp the springs and the nut will come out easy then put the new strut on and put the nut on and loosen the clamp a little so it spring makes tension and tigjten the nut ....
Why not have some metal covers to cover the grates like they use when they are working on roads?
Offset Ring Spanner is the tool you are looking for.
Yuri do you really need all of those drain grilles? I mean how often do they all get used?🤔
One of those subframe bolts was bent, front R/H side.
you can get through socket sets or open L wrench THEN USE 1/4 DRIVE FOR INSIDE
“This video brought to you by Brandon Mitsubishi” lol
BTW, it is cold in Calgary Alberta.... Well, 68F... i think that is cold for the end of June.
That has to be the longest transmission I’ve ever seen
The transfer case is also attached to it
Trolling the trolls, that is funny.
Its ok number one joe yes🤣😂🤣😂🤣😂🤣😂🤣
Gday guys
You have a link for that strut
🚙👏👍💪🤩❤️🐈⬛
a small and a big key one stops moving and the other unscrews no powertools
✌️👌
That isnt a fuel line at 13:17. Its an emissions line. It will throw a code if its leaking.
they sell a rachet set with a hole in the center
You are going to wonder how you ever got anything done without a forklift. Its singularly the most helpful but also the most dangerous piece of kit you can have.
Follow a few basic rules and all will be well.
Look behind you before you reverse, EVERY TIME
NEVER walk, stand ,sit, crawl (an the rest) under the raised forks or raised load
Forklifts are not designed to ride on an unpaved or uneven surface...get stuck in mud or sand and its not pretty !
Only ever ride on the seat never raise anyone on a fork (s) and travel slowly, that rear end damages a bunch of things because it swings out FAST.
Enjoy much useful time and easy moving of heavy stuff !
McFerson strutt, use a deep swan neck spanner (wrench) with a small socket, generally how they work to undo, wow i not done one for years and just remembered - wow you look proper frazzled man, enjoy a cold shower fella with a chilled beer or two
Yuri, man its nearly time you replaced them nasty grates with something a bit heavier that you can make and weld up, something a bit heavier duty, but maybe when its cooler huh
Hello 23 Garage and dad and brother Paul very good job frame machine work and body work and build cars and for customers and family cars good job drive fortlife truck ok job mate me be fortlife truck driver big and mig welding and all welding machine and I love like support and number two fan be happy watching on RUclips channel make videos for fan watching RUclips channel
Thanks for the great memories working my тато on cars many years ago. Except he'd direct far more дурак and дурний s my way 😂
Cat needs to get fixed! He’s getting beaten up, and he’s too skinny! Once he’s fixed he’ll calm down and stop getting into fights. He will also eat better too! please, get cat fixed! Think of all the babies he’s Making that’ll be out in the street that’ll be hungry and cold! 🐱🐈⬛😿
Facts
if it wasn't for sir thomas the cat you would be lost Yuri .
Please feed the cat!
king juri
Pass through ratchet set
You Feeding that cat? He looks skinny
Cat is there to hunt the rats and mice to prevent them gnawing at car wiring…
Aprende a respetar usa camisa siempre gracias los goonzquad son mas respetosos coje el ejemplo.
All the beeping pissed me off
Comment
Let’s go Brandon 😂😂
Like you don't own a rolla way jack
Cat don't like your editing!! & he's fixing it!!....
Ukrainian engineering. Sort of. Cat supervised.
Boring
Gay
stop being cheap and get you an engine table!! sheesh whats this amateur hour>>?>?