@@fermleegrasspit2187 A square knot is a well known knot, also known as the Reef Knot but that is not this 2nd knot. If I Google "Square Knot" that 2nd knot is not what comes up either. Is there another name, or care to elaborate? Thanks!
3 and 5 are actually zeppelin bends, not hunters bends. In a zeppelin bend, the first 2 turns are separate. In a hunters bend, the first 2 turns intersect each other.
@@ajnosek1528 Incorrect. Look closely, 3 & 5 are Hunter's Bends. Look at each knot at 01:49 & 03:07. Each internal part of the rope is under each loop. That never happens with the Zeppelin Bend it does with the Hunter's.
@@johnsettles3 okay, I believe you are right in that they aren’t zeppelin bends. But these are not tied correctly to be the hunters bend. A true hunters bend doesn’t start with 2 separate eye holes. They need to intersect each other first.
@@ajnosek1528 OK, I've looked at both sides of the knot, and the way the ropes lay on both sides is consistent with a Hunter's bend. I am pretty sure those are Hunter's bends. Where do you see the difference? I think you should look closer. By all means if I'm missing something let me know... There are many ways to tie a knot, but what matters is the end result. From what I can see these are Hunter's bends when completed. Knots can be tied in reverse and sometimes appear different, but are the same knot. Anyway, I'm open to observations...
That last one (number 6,) is so nice and clean. I mean, they all are, but some of them have the working ends coming out perpendicular to the standing part which never looks quite as tidy as when they're all parallel. Your skill and knowledge must be very satisfying. My grandpa used to teach me tons of knots and I really wish I had kept up with such a useful skill. Maybe I should get some rope and a book of knots!
@@mach1553 Some work well with rope but not so much with strings. I tried a few and even some that look to be self locking on rope slide so easily with thinner hemp string. The last one has always been my goto for that and works a treat. Hemp string will break before the knot can give way. pretty handy around the garden
@@ledoynier3694 the first knot was almost a "surgeons" knot. Easy double square knot. I've used this on 1/8" poly line to pull electrical wire in conduit.
Depends a lot on how it's attached and the lay of the rope.. Example a bowline is about 53% if it's 3 strand rope. You can eyeball a knot, bend, or hitch and estimate the % based on how sharply bent the rope is where the greatest tension is going to be. You have to be careful tho. Example if a piece of nylon rope has previously been put under a high strain it may have lost some strength at the point where the most strain was applied. That's one reason why you don't put a rope at a high strain. You are supposed to use a conservative safety factor. In the old days it was 1/6 of the breaking strength of the rope. These days if possible 1/10 is recommended.
The more telling test is a release test. Some of these knots will hold under tension but come loose when tension is released. There is a reason you don't use square knots for lifting people or heavy items over head.
Please, tell me, how does the name effect how to tie the knot or its functionality? If you want a video on knots, how to tie them, and the name make it yourself since you seem to be knowledgeable about them since you decided it was some kind of flex to name one of them. If the name doesn't effect its functionality its unimportant thus not needed.
@@eatonknass247 Simple. Knots have names! I think some of your knots also have names. Or, I could drag my laptop into the wild, and when I need to tie a knot, I'll just watch your (supposedly) Unique-to-you knots!
@@eatonknass247 Are you serious with your post? You're asking how does naming something effect how it works or it's functionality? For starters this video is about education & the spreading of educational materials. Giving things names or putting the names where they belong allows EVERYBODY to refer to them easily & allows for structure of this material. That you'd want to sit there & watch a subject/topic WITHOUT names being given to that topic is just asinine.
#3 and # 5 are exactly the same knot, just tied different ways. #4 is a quick-release sheet bend. the problem is ALL of these reduce the overall strength of the connection, sacrificing as much as 50% of the rope strength or more. There are two knots that preserve much more of the rope strength but still provide for a positive connection that will not come undone under load. the Water-knot and the Figure-8 knot. A Water knot is much like #6 though more interlaced, however is suffers from the problem that under a severe load, it will "weld" itself together and become nearly impossible to remove. (someitmes to the point of soaking it and beating it with a mallet) The single best knot to connect to ropes together, is the Figure-8 knot. It preserves 75-80% of the rope strength, and is easily undone by flexing the knot itself till it loosens.
I don't generally get excited over knots and all.. But, this is one of my favorites... Sadly, I got rusty. I do want to thank you for the reminder! Not rocket science as they say.. However, do it correct, and we all can trust in it. THANKS!
Last year, after a small shipwreck, my sailboat got partially stuck in shallow waters, so I used the no.6 to anchor boat on a beach tree and some boulders, and it's safe to say that this knot is indestructible. It held a 5 ton sailboat during a high wind storm for 3 days.
Узел может и выдержит. А вот ваш швартовый это не шкертик. Может не выдержать. Вы когда нибудь видели как рвуться концы дивметром 80-100 мм. Звук плётки и удар в брашпиль как кувалдой. Человека ломает как тростинку!
Шесть узлов - это хорошо, но все ли они равноценны? Какой из этих узлов используют альпинисты? Может какой-то из них позволяет связывать верёвки разной толщины? Может какой-то из них нельзя использовать на верёвках, которые тянуться или мокрые? Вопросов много, ответов нет. Six knots is good, but are they all equal? Which of these knots do climbers use? Maybe one of them allows you to tie ropes of different thicknesses? Maybe some of them should not be used on ropes that are stretchy or wet? Many questions, no answers.
I usually use the double fisherman's knot (#6) sometimes a blood knot which is fast and easy and works well on flat rope. Neither will work loose or compromise the rope strength as much as many other knots do. Untie with hacksaw 😂
Interesting demonstration and a good presentation but I would add the names and uses of the knots. They all join rope but they have different applications to be used safely.
Lots of ways to do it. Hell, a plain square knot will work if you keep the two standing lines on the same side. Two questions you should ask yourself when deciding how to tie the ropes are how easily it can be untied loaded or unloaded, and how easy to untie if the lines are wet.
No. 3 is a zeppelin bend. It is stable, very easy to untie, and will not slip under load. It's my favorite bend to join two ropes or even musical instrument wire. Edit: This actually seems to be a Hunter's bend. Thanks to J Settles for picking up on this. I still really like and highly recommend the zeppelin bend.
@mstalcup Sorry, but respectfully, that's not true, those are hunters bends. Look at those final knot & then look at a Zeppelin Bend, there are differences, and in knots a tiny difference makes a completely different knot. Those are Hunter's Bends, different from Zeppelin Bend.
damn your knots! all 6 came undone! I watched this video to tie a 3mm braided carpon clothesline. These knots do not hold if the diameter of the rope is small, and come undone with normal stretching
The last one is my favorite. I bought some roof and had the last knot. I figured out how to tie myself without anyone teaching me. And now I just saw your video and I tied it the same.
That is called the double fisherman's knot. That's very impressive it came up with it on your own, climbers trusted as the best way of trying two rope ends together. I think.
Nice knots, but they al have the disadvantage that they will get stuck in cracks when you try to pull the rope. Just tie both the ropes together in a single stitch. When you pull the rope, the knot will turn outside whilst moving over the rocks.
Interesting video, clever attention grabbing subject. The next level would be to display each knot under increasing tension until failure to show the effects each style has on the rope's limit. My guess is, with all knot styles using the same rope and force application rate, the knots that have a center mass not inline with the force axis, might fail from the knot shearing the rope, and probably with considerably less force. I'll bet on the first knot, kinda like a square knot with one extra loop on the first wrap. Well, if the experiment interests you, I'd watch and like! Gonna check out your other videos, good job 👍
Anyone who was a boy scout from the 1940's to 1960's was taught all these knots as well as the art of lashing and splicing. as well as knots used in sailing and climbing.
Many years ago, we were given a synthetic rope to test. We set up a pulley system and used knot number 6 to make a loop. We then pulled on that loop until it broke with a huge release of force. The interesting thing was that the knot strands has fused together.
I used nr 6 after watching another toturial to join the tiny threads for my blinds after they had snapped. I remembered it when we moved out, they held for years!
I use the first of these to join main-line to Shock Leader for beach casting. I find that it is more likely that the main-line will break before this know plus it is relatively small when passing through the eye of my rod guides.
3 & 5 is the Zeppelin knot or Zeppelin Bend. A popular sailing knot for securely joining two ropes, which can be loosened relatively easily even after a heavy load. It actually consists of two intertwined simple knots. The commonly accepted name for this knot stems from its alleged use to moor airships.
If I had a PRACTICAL need for a knot (I don't, generally), I would never use any knot shown to me where the presenter could not immediately tell me the name of the knot. Further, some of the knots seem to be variations of known knots, not exact examples of same. Hence, it should not be given that name because variations can be inferior (sometimes vastly so) to the conventional knot. The standard way of tying a given well-known knot has stood the test of time even though the knot itself may have known weaknesses or risks. And if a knot "does not have a name" then that can only mean the knot is generally unknown or not commonly used and thus its reliability is also unknown (or more likely: it is just NOT RELIABLE, since good knots do have names). We are not reinventing the wheel. This is all common sense but some posters don't seem to have that.
1 непригоден для разного размера шнуров 2 3 5 непригодны для проходного узла который двигается через препятствия 4 непригоден для переменных нагрузок 5 непригоден для нагрузок выше 1/3 нагрузки самого шнура 6 стандартный для альпинизма. Непригоден для эластичных шнуров имеющих высокий коэффициент растяжения
Сергей Лёвкин (старику Бари привет) Чётко, то чётко, только если бы был ковбоем, и ли каюром, и вязал бы их на дню ......,а то один узел, чтоб просто петля была полдня шмурыгал, а на утро ну как назло на фаркопий петельку потребовалось накинуть, ну и хули? 5минут повыстебывался и на ,,два узла" затянул
now show us how much weight and vibration each knot can take, tying a knot is easy, but having it come handy where you need, is a different story. for example towing a car with rope can be challenging if you use wrong knot. some knots are more useful when putting lot of load on rope, while others are more useful when having them in environment where they get lots of vibration, like something that is holding an object that is hanging in wind or securing something on roof of your car, some knots can shake apart due vibrations.
1 and 6 are knots I've used and trust. I find knots, where the tails are at right angles, where the tails are at right angles are more prone to rolling under load.
В 1 не помешал бы Контрольный, 4 - понравилась, годится при переправе (понятно, что, для того, чтобы реп (шнур, веревку1 забрать с собой, петля будет длиннее..
Buenas tardes :hace unos días compré el monocular y no cubre mis espectativas ,no consigo ponerme en contacto con la empresa ,les ruego se pongan en contacto conmigo como lo hicieron para pedirlo gracias
@@handknottips4591: Just the simple one where you make your loop and then bring the end back around and through the loop... except with the two ends together.
1 Surgeon's Ligature - 0:01
2 (Knot Sure... Anyone?) - 0:34
3 Hunter's Bend - 1:19
4 Slipped Sheet Bend - 2:01
5 Hunter's Bend - 2:41
6 Double Fisherman's Knot - 3:27
@@fermleegrasspit2187 A square knot is a well known knot, also known as the Reef Knot but that is not this 2nd knot. If I Google "Square Knot" that 2nd knot is not what comes up either. Is there another name, or care to elaborate? Thanks!
3 and 5 are actually zeppelin bends, not hunters bends. In a zeppelin bend, the first 2 turns are separate. In a hunters bend, the first 2 turns intersect each other.
@@ajnosek1528 Incorrect. Look closely, 3 & 5 are Hunter's Bends. Look at each knot at 01:49 & 03:07. Each internal part of the rope is under each loop. That never happens with the Zeppelin Bend it does with the Hunter's.
@@johnsettles3 okay, I believe you are right in that they aren’t zeppelin bends. But these are not tied correctly to be the hunters bend. A true hunters bend doesn’t start with 2 separate eye holes. They need to intersect each other first.
@@ajnosek1528 OK, I've looked at both sides of the knot, and the way the ropes lay on both sides is consistent with a Hunter's bend. I am pretty sure those are Hunter's bends. Where do you see the difference? I think you should look closer. By all means if I'm missing something let me know... There are many ways to tie a knot, but what matters is the end result. From what I can see these are Hunter's bends when completed. Knots can be tied in reverse and sometimes appear different, but are the same knot. Anyway, I'm open to observations...
Knots 3 and 5 are actually the same knot. Good Video!
Hunter's bend knot
That last one (number 6,) is so nice and clean. I mean, they all are, but some of them have the working ends coming out perpendicular to the standing part which never looks quite as tidy as when they're all parallel.
Your skill and knowledge must be very satisfying. My grandpa used to teach me tons of knots and I really wish I had kept up with such a useful skill. Maybe I should get some rope and a book of knots!
Nice and clean but very difficult to untie after loading. Zeppelin bend or sheet bend is better for reusability.
And maybe even adopt a new grandpa
two of the ones that are perpendicular (go off at a ninety) are quick release.
It's a double fisherman's knot. IDK why he didn't put the names of the knots in there.
Three and five are the same knot. If you put the names in, it would reveal that he accidentally included the same knot two times.
Would be curious to know which knots are strongest based on a pull test.
I second that request 👍
@@mach1553 Some work well with rope but not so much with strings. I tried a few and even some that look to be self locking on rope slide so easily with thinner hemp string. The last one has always been my goto for that and works a treat. Hemp string will break before the knot can give way. pretty handy around the garden
@@ledoynier3694 the first knot was almost a "surgeons" knot. Easy double square knot. I've used this on 1/8" poly line to pull electrical wire in conduit.
Depends a lot on how it's attached and the lay of the rope.. Example a bowline is about 53% if it's 3 strand rope. You can eyeball a knot, bend, or hitch and estimate the % based on how sharply bent the rope is where the greatest tension is going to be. You have to be careful tho. Example if a piece of nylon rope has previously been put under a high strain it may have lost some strength at the point where the most strain was applied. That's one reason why you don't put a rope at a high strain. You are supposed to use a conservative safety factor. In the old days it was 1/6 of the breaking strength of the rope. These days if possible 1/10 is recommended.
The more telling test is a release test. Some of these knots will hold under tension but come loose when tension is released. There is a reason you don't use square knots for lifting people or heavy items over head.
Adding the names of the knots would be useful!
none of them have names because he just made them
@@arnaudpelham6906 Sorry, one of them is called "Bowline on a bight".
Please, tell me, how does the name effect how to tie the knot or its functionality? If you want a video on knots, how to tie them, and the name make it yourself since you seem to be knowledgeable about them since you decided it was some kind of flex to name one of them. If the name doesn't effect its functionality its unimportant thus not needed.
@@eatonknass247 Simple. Knots have names! I think some of your knots also have names. Or, I could drag my laptop into the wild, and when I need to tie a knot, I'll just watch your (supposedly) Unique-to-you knots!
@@eatonknass247 Are you serious with your post?
You're asking how does naming something effect how it works or it's functionality?
For starters this video is about education & the spreading of educational materials.
Giving things names or putting the names where they belong allows EVERYBODY to refer to them easily & allows for structure of this material.
That you'd want to sit there & watch a subject/topic WITHOUT names being given to that topic is just asinine.
Nice knots, the last one is beautiful the way it slides into its locking position. Cheers.
Number four was hot af. This was some real knotty stuff you did. Loved it!
What's as important to know about knots is when and where to use each one.
#3 and # 5 are exactly the same knot, just tied different ways. #4 is a quick-release sheet bend. the problem is ALL of these reduce the overall strength of the connection, sacrificing as much as 50% of the rope strength or more.
There are two knots that preserve much more of the rope strength but still provide for a positive connection that will not come undone under load. the Water-knot and the Figure-8 knot. A Water knot is much like #6 though more interlaced, however is suffers from the problem that under a severe load, it will "weld" itself together and become nearly impossible to remove. (someitmes to the point of soaking it and beating it with a mallet) The single best knot to connect to ropes together, is the Figure-8 knot. It preserves 75-80% of the rope strength, and is easily undone by flexing the knot itself till it loosens.
Check out zeppelin bend, for two ends of similarly sized rope that you plan to untie, I know of no better.
6 is the double fisherman knot and the only secure one among those demonstrated in this video
The catacomb deep-skull knot blows all of these away! Yall should look it up! We used it cave diving in bora bora during WW2.
@@LuLe232топ 3: плоский, цеппелин, лиановый.
@@_PaRaDoXxXxX_ Sorry, I can't read cyrilic.
I wish I could remember these knots when I need to tie one!
I don't generally get excited over knots and all.. But, this is one of my favorites... Sadly, I got rusty. I do want to thank you for the reminder! Not rocket science as they say.. However, do it correct, and we all can trust in it. THANKS!
Knot something I will ever remember but this was an excellent demonstration, even my shoelaces are tricky, tricky, tricky😉
Best demonstration I’ve ever seen. Much better than drawings. Good choice to use diferent color ropes.
How about showing the names and best use?
Thank you for your comment, I will explain in detail in the future
@@handknottips4591 Can you tell me which video explains these details?
I am absolutely in awe by the Knowledge of Knots, the utility & the sheer Ingenuity of what one can do with the simple rope or string.
Last year, after a small shipwreck, my sailboat got partially stuck in shallow waters, so I used the no.6 to anchor boat on a beach tree and some boulders, and it's safe to say that this knot is indestructible. It held a 5 ton sailboat during a high wind storm for 3 days.
Knots are only as good as the rope and anchor points
I'm more impressed with the tree.
I use that knot to tie two pieces of fishing line. It's a really strong knot.
Узел может и выдержит. А вот ваш швартовый это не шкертик. Может не выдержать.
Вы когда нибудь видели как рвуться концы дивметром 80-100 мм.
Звук плётки и удар в брашпиль как кувалдой. Человека ломает как тростинку!
@@ConReese 😂
В такелаже морском, верёвок нет. Там концы. А хрен верёвкин сидит на причале!🤗
Nr 6! Bcoz the ends are not sticking out and looking weird. Great upload thx!
試用第一種：美觀、牢靠、易拆⋯真是太巧妙了👍
Surgeon knot
Шесть узлов - это хорошо, но все ли они равноценны? Какой из этих узлов используют альпинисты? Может какой-то из них позволяет связывать верёвки разной толщины? Может какой-то из них нельзя использовать на верёвках, которые тянуться или мокрые? Вопросов много, ответов нет.
Six knots is good, but are they all equal? Which of these knots do climbers use? Maybe one of them allows you to tie ropes of different thicknesses? Maybe some of them should not be used on ropes that are stretchy or wet? Many questions, no answers.
Никакой узел из перечисленных не используется в альпе
@@александрмалышев-в9ь грепвайн используется
@@cfvfn12 да, грейп есть, невнимательно посмотрел
@@cfvfn12 причем еще как используется. и для карабинов и для связывания веревек и для создания петель
No idea why I'm watching knot tying videos at 2 am but the last one is pretty cool I guess
Thanks for showing us the ropes!
All variations on a good ol' simple square knot! When you're in the thick of it simple is better.
I usually use the double fisherman's knot (#6) sometimes a blood knot which is fast and easy and works well on flat rope. Neither will work loose or compromise the rope strength as much as many other knots do. Untie with hacksaw 😂
Interesting demonstration and a good presentation but I would add the names and uses of the knots. They all join rope but they have different applications to be used safely.
Piggybacking bs for views. Sheet bend or square knot wil do.
Lots of ways to do it. Hell, a plain square knot will work if you keep the two standing lines on the same side. Two questions you should ask yourself when deciding how to tie the ropes are how easily it can be untied loaded or unloaded, and how easy to untie if the lines are wet.
Thanks for this video!!! Is there a kind of mini lighter that you can use to precisely flame the ends of a rope?
근데 영상 진짜 너무 깔끔하네요. 너무 잘 보고 갑니다.
더 많은 매듭 정보 기대하겠습니다.
No. 3 is a zeppelin bend. It is stable, very easy to untie, and will not slip under load. It's my favorite bend to join two ropes or even musical instrument wire. Edit: This actually seems to be a Hunter's bend. Thanks to J Settles for picking up on this. I still really like and highly recommend the zeppelin bend.
3 & 5 are a Hunter's Bend, similar, but different from a Zeppelin Bend. It jams up easier FYI.
@mstalcup Sorry, but respectfully, that's not true, those are hunters bends. Look at those final knot & then look at a Zeppelin Bend, there are differences, and in knots a tiny difference makes a completely different knot. Those are Hunter's Bends, different from Zeppelin Bend.
So which is the better knot to be both strong and to be able to untie, the Zeppelin or the Hunter?
@@haliaeetus8221 Zeppelin is better. Sheet bend also work well when doubled.
@@bjooo Thank you for advising.
damn your knots! all 6 came undone! I watched this video to tie a 3mm braided carpon clothesline. These knots do not hold if the diameter of the rope is small, and come undone with normal stretching
They all hold the same purpose only they look a bit different, but which is the strongest I wonder? … Cool vid dude 😎👍✨
色々な結び方出来るの素晴らしい✨
てか、掌の筋肉すごいっっ💪
They're all so simple yet I can never remember them when I need to tie anything together.
You shouldof put the names too. I love knot names. Usually nautical links
The last one is my favorite. I bought some roof and had the last knot. I figured out how to tie myself without anyone teaching me. And now I just saw your video and I tied it the same.
That is called the double fisherman's knot. That's very impressive it came up with it on your own, climbers trusted as the best way of trying two rope ends together. I think.
Приятно смотреть, класс, спасибо
Very interesting video. It will be more educative if it is also mentioned as to where (or in which situation) the knots are more userful.
Very interesting and useful. Fantastic video.
Круто) и понятно всё, благодарю)!
Спасибо за просмотр
3 and 5 are the same knot made in a different way
They both appear to be faulty zeppelin bends.
Nice knots, but they al have the disadvantage that they will get stuck in cracks when you try to pull the rope. Just tie both the ropes together in a single stitch. When you pull the rope, the knot will turn outside whilst moving over the rocks.
Interesting video, clever attention grabbing subject. The next level would be to display each knot under increasing tension until failure to show the effects each style has on the rope's limit. My guess is, with all knot styles using the same rope and force application rate, the knots that have a center mass not inline with the force axis, might fail from the knot shearing the rope, and probably with considerably less force. I'll bet on the first knot, kinda like a square knot with one extra loop on the first wrap. Well, if the experiment interests you, I'd watch and like! Gonna check out your other videos, good job 👍
a polite way of telling that it's actually not a good job. no knot names, advantages, disadvantages etc.
@@AndreiChera I don't get it (?)
Yea the 1’st one looks the strongest to me.
Probably knot easy to undo after load though 😂
Thank you! I coinjoined two ropes to make my jump rope work.
I did not learn any of these in boy scouts many years ago. Thanks.
Anyone who was a boy scout from the 1940's to 1960's was taught all these knots as well as the art of lashing and splicing. as well as knots used in sailing and climbing.
How about ditching the annoying background “music”!
Mute
There is no sleight of hand but it still looks like a magic trick.
# 6 works great & easy to tie BUT, if it's subjected to a significant load then it is permanent.
Can you do a follow-up video where you test how much force each knot can withstand?
4 ый способ понравился👍, и развязать обратно можно быстро
I was curious of many people know how to make a thief knot? I learned this when I was young and never asked anyone! Good day mateys!
Many years ago, we were given a synthetic rope to test. We set up a pulley system and used knot number 6 to make a loop. We then pulled on that loop until it broke with a huge release of force. The interesting thing was that the knot strands has fused together.
I don't understand unless you meant to write you used knot number 6 (not numerous 6)?
It is called a double fisherman's knot.
It is generally considered the only knot you should be using to connect 2 ropes together in rock climbing.
Thank you for telling me a good way to tie a knot!!!!!!
#6 is probably my favorite knot in the world...
I've usted the last one many times for abseiling joining two ropes together and works wonderfully
I used nr 6 after watching another toturial to join the tiny threads for my blinds after they had snapped. I remembered it when we moved out, they held for years!
Great knots, but turn the volume down to avoid music trauma
#6 is double fisherman's knot. Crazy strong. Hard to undo.
Super easy to undo with rope. Each knot slides on the opposing rope.
Popular knot for hammock sleeping
#1 is nothing more than a surgeon’s knot. I like #4: the undoable sheetbend. If low-tension (lanyard), #6 is adjustable length, probably very strong.
1 is also known as the weaver's knot.
Square knot
#4 is also called a slipped becket. # 6 is a double fisherman’s knot
I like #4
many many thanks ! I think it is 1 of a skill need to introduced in the curriculum .
I use the first of these to join main-line to Shock Leader for beach casting. I find that it is more likely that the main-line will break before this know plus it is relatively small when passing through the eye of my rod guides.
The first one is called "Webeleinsteg" in German.
Wow, that is so simple and good.
Will all these work with thinner, more flexible, rope/cord (paracord for example)?
1번이 단순하면서도 깔끔한데, 4번은 나중 해체까지 완벽하네요
Can you kindly advise which method is the strongest to tie 2 robes together ?
Is number 3 the same as number 5? Are the both Zepplin bends?
По-моему это два способа завязывания одного узла.
3 & 5 is the Zeppelin knot or Zeppelin Bend.
A popular sailing knot for securely joining two ropes, which can be loosened relatively easily even after a heavy load. It actually consists of two intertwined simple knots. The commonly accepted name for this knot stems from its alleged use to moor airships.
that was awesome dude...thanks for sharing
The third one is best. It can be untied and works well on connecting different sized ropes.
My dad told me that the best knots can hold a very high amount of force, but can also be taken apart with a single pull.
Then your dad is a narrow minded fool. Bless his heart.
Guess you had better get to testing them. Just saying. And applying them to your daily. Good Luck
If I had a PRACTICAL need for a knot (I don't, generally), I would never use any knot shown to me where the presenter could not immediately tell me the name of the knot. Further, some of the knots seem to be variations of known knots, not exact examples of same. Hence, it should not be given that name because variations can be inferior (sometimes vastly so) to the conventional knot. The standard way of tying a given well-known knot has stood the test of time even though the knot itself may have known weaknesses or risks. And if a knot "does not have a name" then that can only mean the knot is generally unknown or not commonly used and thus its reliability is also unknown (or more likely: it is just NOT RELIABLE, since good knots do have names). We are not reinventing the wheel.
This is all common sense but some posters don't seem to have that.
do they have names? and 3 and 5 look identical. 4 is a becket bend with a slip (schotstek auf slip in german).
The 1’st one was the most simple and elegant to me
OMG, it's a noose! Always remember the formula C+T=N, or Cordage + Twist = NOOSE. Let's all go to our crying closet immediately.
After a big tug, how do you get them apart?
Double fisherman knot is so hard to open after it has been tensioned. Is it meant to be permanent joint?
Название узлов желательно указывать!
И назначение. Большенство узлов в определённом случае используется.
у него много названий.двойной рыбацкий
They must be using the whole Chinese Peking Philharmonic Orchestra composing that torturous / annoying background noise. Mindnumbing . . . .
Спасибо.полезное видео. уже научился
Главное не научиться,а не забыть))
Last one: double fisherman's knot. 😉
Ткацкий
1 непригоден для разного размера шнуров
2 3 5 непригодны для проходного узла который двигается через препятствия
4 непригоден для переменных нагрузок
5 непригоден для нагрузок выше 1/3 нагрузки самого шнура
6 стандартный для альпинизма. Непригоден для эластичных шнуров имеющих высокий коэффициент растяжения
Чётко, просто и надёжно!
Сергей Лёвкин (старику Бари привет)
Чётко, то чётко, только если бы был ковбоем, и ли каюром, и вязал бы их на дню ......,а то один узел, чтоб просто петля была полдня шмурыгал, а на утро ну как назло на фаркопий петельку потребовалось накинуть, ну и хули? 5минут повыстебывался и на ,,два узла" затянул
@@ГаражУЛьвовича был бы ты такелажником промышленным альпинистом или моряком.... нормально их вязать и быстро ковбои соврать не дадут
Интересно насколько они надежны?
@@567Бубалайф половина из показанных узлов - точно бесполезны и не важно на сколько они надежны...
3:27 esse é o nó que tanto estava esperando que aparece na Thumb Neil
now show us how much weight and vibration each knot can take, tying a knot is easy, but having it come handy where you need, is a different story. for example towing a car with rope can be challenging if you use wrong knot. some knots are more useful when putting lot of load on rope, while others are more useful when having them in environment where they get lots of vibration, like something that is holding an object that is hanging in wind or securing something on roof of your car, some knots can shake apart due vibrations.
1 and 6 are knots I've used and trust. I find knots, where the tails are at right angles, where the tails are at right angles are more prone to rolling under load.
If you want security, use 6, the double fisherman. Once it takes a heavy load, it will take a lot of time and effort to untie.
Which one was the sheepsbend?
В 1 не помешал бы Контрольный, 4 - понравилась, годится при переправе (понятно, что, для того, чтобы реп (шнур, веревку1 забрать с собой, петля будет длиннее..
Just tie a reef knot , left over right and under,right over left and under
Buenas tardes :hace unos días compré el monocular y no cubre mis espectativas ,no consigo ponerme en contacto con la empresa ,les ruego se pongan en contacto conmigo como lo hicieron para pedirlo gracias
сколько можно два конца связывать ? а как привязаться одним концом к канату ?
Узлы шкотовый, брамшкотовый.
Ты ещё скажи что последний “6” - «двойной ткацкий»🤣🤣🤣🤣🤣
3 und 5 sind gleich. Ein Zeppelinknoten.
Und beide Male falsch geknotet...
Vende pra mim um pendrive, cd ou dvd com vídeos ensinando a dar nós. Sou apaixonado por este hoby.. obrigado pelo vídeo.
5 just a worse version of 3? 6 was really nice.
This is the video I always need when my wash line breaks
Muito bom fez devagar deu pra entender
釣りでラインとリーダー連結で使えそうなやつあるかな？6番目が使えそうだけど
Why no standard knot (the two ends are parallel to each other as they go around)?
I don't know what knot you're talking about
@@handknottips4591: Just the simple one where you make your loop and then bring the end back around and through the loop... except with the two ends together.
@@HelloKittyFanMan An overhand knot? That wouldn’t support anything if it got shocked
Why not, @@muffinconsumer4431?
Wow! Nice video!
I love the final knot, good for necklace
#6 is the nicest !
Next demonstration you could show us how to tie up damsels😀
Boy Scouts, learned how to tie-up Girl Scouts. Sorry, bad joke...or was it.
Look up the handcuff knot. Very easy to tie
The 600th comment🎉