I used this video yesterday to remove my first stuck case in over 40 years of loading..... worked like a charm... thanks saved an embarrassing trip to my Gunsmith
I've been reloading for 28 years and tonight was the first time I've ever had a rifle case stick. You're video with the drill and tap removal was excellent. I was able to remove the case with out any swearing, that was reserved for getting it stuck in the first place. I normally use a lube which I wipe on but was trying a spray on and obviously didn't use enough. Thank you again!
I've known this trick about drilling and tapping the hole technique but when you reversed the die into the press and used it as your vise, i thought wow thats genius!! Love all your videoes, keep up the super work! I look forward to all your videos. They are so easy to follow and informative! Have a great day and GOD BLESS my friend!
Can't thank you enough for keeping this video posted. I stuck a brand new Starline 6.8 SPC case last week. I have the Hornady Stuck Case Remover tool, but despite following instructions I couldn't unstick the case. I was on the right track, but when I encountered stiff resistance I stopped...thinking I'd bottomed out the tool. No...I just needed to try again, applying a bit of lubricant (gun oil) around the case head. It took actually watching your process to understand that I'd done everything correctly (mostly) but gave up when the case didn't just pop out. A bit of lube...and voila! I don't care much about one destroyed Starline case...it was the unusable sizing die that was jamming me up.
I've been reloading for about ten years. Several years ago I watched your video and filed it away "just in case". I'm glad I did because needed your idea. You really saved my bacon. Thank you.
Thanks for this vid brother.. my son jammed a .30-06 case in my new die tonight. He thought we were going to have to buy a new die. When I showed him this trick, he thought his old man was pretty smart. I have to give credit were credit is due. Thanks brotha, you saved our bacon.
Technique #2 saved the day for a Lyman die where I'd put in a properly lubed cartridge with a rim just bent enough that it failed on the downstroke, leaving the brass jammed in the die. Without a machine screw, however, I used a 1/4" hex bolt and turned that to remove the shell. Worked like a charm! Many thanks!
Whenever using taps, it's imperative to go forward for a little bit, then reverse so you clean the threads. This will also prevent your tap causing the die to turn so easily. It will cause less stress on your tap, too. When tapping steel, you will break the tap if you don't use this procedure.
Been there and done that. If using RCBS Dies, can't completely remove Decapping/depriming stem. Use a spacer on the drill bit to prevent drilling deeper than about 5/16-3/8" or drill bit will jump through base of cartridge case, and bend/destroy Decaping/DePrimer pin. Don't ask me how I know that. Lol.
Dude, that works great, I just unstuck a .243 case out of a Hornady die, my fault, didn't use enough lube, will never make that mistake again. It took some work but your method works fantastic.Thank you so much for putting this video together.
When describing tools needed to drill-tap method use said 7/32" drill bit. Then in the process you said 7/16" drill bit (way bigger bit). Regardless, your video was a great help. I had tools on hand and was able remove my stuck cartridge with your help. Greatly appreciate you!
Thanks so much for another excellent, top notch well explained tutorial. I already watched your videos on reloading 9mm and reloading 223....You have a great gift of being able to accurately and precisely and calmly explain processes while also offering up some extra options of solutions for various challenges one would encounter in the reloading experience. Thank you so much for all your excellent, well made and great videographed videos. I have them saved to my favorites and before reloading I review them so I will be on the correct track. Thank you sir and I will continue to subscribe to your excellent tutorial videos. 👍
Just worked for me. I had a rcbs die and got it done with your second technique. Saved me a month of waiting for a new die set. You da man. Thank you. Schooling us, also learned to reload from you!
A 1/4 20 socket head cap screw. It's a screw untill you put a nut on it then it becomes a bolt ! I'm not criticizing you ,just informing you on the proper terminology! Great viedo and information ! Thank you !
I know that this is an older vid, but it is what I needed today. A quick trip to the hardware store took longer than the removal using your method. Believe me when a .50 Beowulf gets stuck in a Redding die it is stuck. The next time, hopefully not, it will come out in a jiffy. Thanks a million.
Great video! I happen to have everything in my shop to use your method to remove my stuck case. Giving the drill bit and tap size fast and easy. Thank You!
I was getting ready to tell you... When drilling metal(of any kind), apply plenty of pressure, and use very little rotation. I've learned to do this by "feel", because I've been drilling holes into hard strata(sandstone) all of my life, in the coal mining industry. I've sat and watched a lot of "rookie" roof bolter operators, grind down bit, after bit, after bit, because they were using too much rotation. I always let them struggle for awhile, before I tell them the "secret". LOL I heard you say how you had your drill set "slow", on purpose. Go even slower, with more pressure, for even better results. Great video! Thanks for the help!! I got a RCBS Rock Chucker Supreme for Christmas. I'm waiting on my dies to come in, then I'll be going at it. I've been watching tons of videos on reloading, to learn all that I can.
The second step worked like a charm. Spent $6.47 at HD for the 1/4”-20 tap with matching drill bit and $0.97 for a 2” matching screw. A couple sockets and washers worked as a spacer and it came right out. No need to order a kit online.
Had a 30-06 case stuck in Lyman sizing-decapping die. Drilled with .219 (7/32") bit, threaded with 1/4 x 20 tap, put grade 5 screw through washer and socket, and turned screw into case and out it came as you described. Thanks very much for this lesson.. Lesson #2: use proper amount of lubrication in future sizing operations.
Tried the punch method. I am glad I didn't get to aggressive with it. Redding dies have a pin collate that can come loose and remained in casing. Hitting it with a punch would have been costly. However, drilling then tapping worked exactly how explained. Smooth as butter. Thanks for sharing
Hey its me again. Your method worked for me like a charm. The decapping pin broke so I will be heading to Scheels tomorrow to get replacements. Too much lube is better than not enough.
This video...along with your other ones....have been so helpful/informative. Thank you for putting up content that is in depth and easy to follow. Subbed.
Sir Used your suggestion for placing die upside down in my turret press. This method will prevent the die from turning when the force is applied to the tapped case head. Was able to remove stuck .30-06 case with the socket and washer method. Many thanks!
Thanks so much for the awesome tips! I haven't encountered having a stuck case yet but I'm sure it's only a matter of time, I've only been reloading for about a year-and-a-half. It is something that I have thought about since I've had a couple of close calls. I feel like you have now equipped me for that eventuality. Thanks again, excellent video and excellent tips!
Great video! You just save me $29.00. I just had a stuck case and pounded it out destroying a Redding die and almost damaging my Lee press. I was just about to order the stuck case kit from Midway USA and now I don't have to. I have all the tools here and now the knowledge to remove future stuck cases. THANKS
When running a tap in, it's important to back the tap out 1/4 turn for every 3/4 turn (or so) that you go in. This action breaks loose the chips being pushed up by the thread cutters and moves them into the flutes, which keeps the tap from getting stuck. Also, use a squirt of cutting oil on the tap - it makes the tap much easier to turn, cuts cleaner threads, and your tap will stay sharp a lot longer.
So after hammering the crap out of my stuck case to no avail, I went to RUclips. This second method worked great even though I has mangled the bottom of the case. Thanks for the tip - I hope I never have to use it again!
I've never had a tap break by tapping a piece of brass for removal and I've been doing it this way for a long time. I'm not tapping steel. I guess you're right though. Sounds like a good technique. I'll try it out. Maybe it'll be smoother. Thanks for stopping by and leaving your comment. have a good evening! :)
After reloading 10, thousands over the past thirty years I just had my first stuck case man what surprise that was well I tried your punch method first and WOW within a couple minutes I was back to reloading thanks for the info.
Did it just like you said worked just fine. I did it on .223 rem. He misspeaks about the hole size once. remember its 7/32 inch [just under 1/4] i used a 3/8ths in socket for my bushing with 1/4 inch drive. Id also recommend bying different lengths of screws. The more threads you drive in before you start drawing out the casing, the less likely it is the threads will strip.
This works! After seeing this, I actually used the RCBS primer pocket swager that I already had, which comes with almost the identical "bushing" just a tad shorter in height.
Great video! I did everything except for I kept upsizing my drill bit until I’ve got a shell skin pretty much, tried a screw back out tool. Then ran across your video. Amazing! However mines still very very much in there. So I’m going to use a dremel bit and remove a side, collapse it on itself and then pull it out. Much praying too lol. Sure wish I’d seen your tip before I went all Rambo on mine lol. My cases were even lubed up. Just not fair, especially since I just got my hands on 20 boxes of primers. Ugh lol.
I’ve been reloading for 30 or so years never had a stuck case. But this is good to know in case I do get one stuck. Thanks. I have all the parts to make up a removal tool kit..
Question: after removing the.decapping assembly, can't you just run an appropriately sized drift thru the die to seat on the floor of the case and just hammer the case out? One mild blow I think would do it.
used method #2 this evening to pull a stuck .223 casing. Once I found the right bolt in my garage stash, was able to get it out no prob. I used a 1/4"-20 bolt. Better than spending the $$ on the tool at Scheels or Cabelas. Thanks so much!!
Thank you for producing this video. I made a dummy round to practice with my Handi Rifle and the brass stuck to the walls? I tried the first technique, simple success with the second. I went to Lowes and got the screw, washer, and a tap tool. I'm not sure what else I can tap around here, but that was fun.
How long is your machine screw. I am going to try and fix my brand new 300 blackout die but I may have messed it up. I might just shoot out the stuck case.
Here's a tip from a machinist: Buy a Tap Wrench. Turn the tap in reverse to break the chip. Use a drop or two of oil. Use a #5 drill for a 1/4-20 tap. If your tap is DULL replace it.
Thanks for the video. My first stuck case lack of Lube! Got it out no problem the expander ball nut an pin stais inside I cut the case with cable cutters no problem
Very good video. ---- Alternative technique: Instead of "backing up" the die with the ram, it is equally effective to clamp a pair of vise-grip pliers onto the die body. The pliers will arrest the die from spinning when they encounter the body of the press. This will allow you to use both hands on the workpiece, instead of having to use one hand to maintain pressure on the handle of the press.
Alright, you sold me on the lee die. My RBCS thread stripped when I tried to remove a stuck case. Thank for sharing. Did you ever see the thread in the brass stripped? Can you start over at this point with a larger bit or you are done and need a new die?
+David Cazes Cool! Once in a while I see the brass strip, but not that often. Thank you for the kind words and support you give my channel. Have a beautiful evening!
+jiujitsu2000 in the second method, once the die is threaded in the press upside down I use a piece of broken cleaning rod to push the case out with the ram, just find something to cover the hole in the shell holder. it usually works pretty good, and you save the case.
Well I'm screwed. I tried to use this method and the screw kept popping out stripping the threads in the process. I try again and the hole I drilled keeps getting bigger & bigger to now I just have a hollow brass tube stuck in my 223 hornady resizer die....
after screwing down the black hex screw into the brass, the case didnt back up like its meant to. What else can i do? Update: got it out! just had to screw down the black hex screw to the very bottom, until you hit the xpander pin.
The RCBS Stuck Case Remover is worth the money and it comes in a die box, so stores where you'll find it easily. When I bought my first press in 1981, my friend the LGS owner sold me a kit with the Rockchucker press. I have used it twice since then and loaned it to a friend once. Well worth the money, I was back in business in minutes. Good video, thanks.
I got a 300 blk case stuck and the primer pin was sticking out of the flash hole. The sizing ball was stuck in the case after it was sized.. Got any good ideas?
I've been reloading for about 7yrs and never had a stuck case. I used Hornady One shot for the first time on a batch of 20 cases and got my first stuck case about 15 cases in... Unfortunately, while I have the same Lee die in .308, the punch method is not working for me. On to tapping.
I made the mistake of using one shot case lube to lube my die and a casing got stuck but using the punch method worked great. Second time I had a case stuck and I am going to try and salvage my other die. I got frustrated and just used vise gripes and a hammer instead of being calm. The airframer came out in me! I just needed a bigger hammer! :)
Kyle Delorme One Shot is great for running pistol brass through a carbide die on a progressive, and a light spray on a neck brush works great, but for rifle sizing I’d use conventional lube on a pad.
I used the pound it out method. My new decapper/expander tip and adjusting screw will be here in a couple days. Oh, well, I've spent more to learn less.... Lube them cases!
I used this video yesterday to remove my first stuck case in over 40 years of loading..... worked like a charm... thanks saved an embarrassing trip to my Gunsmith
I've been reloading for 28 years and tonight was the first time I've ever had a rifle case stick. You're video with the drill and tap removal was excellent. I was able to remove the case with out any swearing, that was reserved for getting it stuck in the first place. I normally use a lube which I wipe on but was trying a spray on and obviously didn't use enough. Thank you again!
+Mudonface Thank you!
I've known this trick about drilling and tapping the hole technique but when you reversed the die into the press and used it as your vise, i thought wow thats genius!! Love all your videoes, keep up the super work! I look forward to all your videos. They are so easy to follow and informative! Have a great day and GOD BLESS my friend!
Thank you for taking the time to stop by and share your kind words as well as there support you give my channel. Have a beautiful day! God bless!!
Can't thank you enough for keeping this video posted. I stuck a brand new Starline 6.8 SPC case last week. I have the Hornady Stuck Case Remover tool, but despite following instructions I couldn't unstick the case. I was on the right track, but when I encountered stiff resistance I stopped...thinking I'd bottomed out the tool. No...I just needed to try again, applying a bit of lubricant (gun oil) around the case head. It took actually watching your process to understand that I'd done everything correctly (mostly) but gave up when the case didn't just pop out. A bit of lube...and voila! I don't care much about one destroyed Starline case...it was the unusable sizing die that was jamming me up.
I've been reloading for about ten years. Several years ago I watched your video and filed it away "just in case". I'm glad I did because needed your idea. You really saved my bacon. Thank you.
Carlos Spicy Weiner Thank you for the kind words and support you give my channel!
Thanks for this vid brother.. my son jammed a .30-06 case in my new die tonight. He thought we were going to have to buy a new die. When I showed him this trick, he thought his old man was pretty smart. I have to give credit were credit is due. Thanks brotha, you saved our bacon.
Awesome! Thank you!!
Technique #2 saved the day for a Lyman die where I'd put in a properly lubed cartridge with a rim just bent enough that it failed on the downstroke, leaving the brass jammed in the die. Without a machine screw, however, I used a 1/4" hex bolt and turned that to remove the shell. Worked like a charm! Many thanks!
Whenever using taps, it's imperative to go forward for a little bit, then reverse so you clean the threads. This will also prevent your tap causing the die to turn so easily. It will cause less stress on your tap, too. When tapping steel, you will break the tap if you don't use this procedure.
Been there and done that. If using RCBS Dies, can't completely remove Decapping/depriming stem. Use a spacer on the drill bit to prevent drilling deeper than about 5/16-3/8" or drill bit will jump through base of cartridge case, and bend/destroy Decaping/DePrimer pin. Don't ask me how I know that. Lol.
Great Video. Nice Job. Thanks From an Old Timer. Started Reloading back in 1968.
Yeah it breaks the chip.
chip breaking. long continuous chips are hell on taps
Loose the shifter, even a crescent wrench can round a nut, use the right size socket or ring. With the tap use a T tap wrench.
Man, thank you even 9yrs later this video you put together helped me remove my case. I hope your well.
It’s almost 2024 and this video is still helping me! Thanks!!!!
Dude, that works great, I just unstuck a .243 case out of a Hornady die, my fault, didn't use enough lube, will never make that mistake again. It took some work but your method works fantastic.Thank you so much for putting this video together.
good to hear! thank you!!
When describing tools needed to drill-tap method use said 7/32" drill bit. Then in the process you said 7/16" drill bit (way bigger bit).
Regardless, your video was a great help. I had tools on hand and was able remove my stuck cartridge with your help. Greatly appreciate you!
Thanks so much for another excellent, top notch well explained tutorial. I already watched your videos on reloading 9mm and reloading 223....You have a great gift of being able to accurately and precisely and calmly explain processes while also offering up some extra options of solutions for various challenges one would encounter in the reloading experience. Thank you so much for all your excellent, well made and great videographed videos. I have them saved to my favorites and before reloading I review them so I will be on the correct track. Thank you sir and I will continue to subscribe to your excellent tutorial videos. 👍
Awesome information. Beats the heck out of a punch, anvil, and hammer idea.
Just worked for me. I had a rcbs die and got it done with your second technique. Saved me a month of waiting for a new die set. You da man. Thank you. Schooling us, also learned to reload from you!
A 1/4 20 socket head cap screw. It's a screw untill you put a nut on it then it becomes a bolt ! I'm not criticizing you ,just informing you on the proper terminology! Great viedo and information ! Thank you !
I know that this is an older vid, but it is what I needed today. A quick trip to the hardware store took longer than the removal using your method. Believe me when a .50 Beowulf gets stuck in a Redding die it is stuck. The next time, hopefully not, it will come out in a jiffy.
Thanks a million.
Great video! I happen to have everything in my shop to use your method to remove my stuck case. Giving the drill bit and tap size fast and easy. Thank You!
I was getting ready to tell you... When drilling metal(of any kind), apply plenty of pressure, and use very little rotation. I've learned to do this by "feel", because I've been drilling holes into hard strata(sandstone) all of my life, in the coal mining industry. I've sat and watched a lot of "rookie" roof bolter operators, grind down bit, after bit, after bit, because they were using too much rotation. I always let them struggle for awhile, before I tell them the "secret". LOL I heard you say how you had your drill set "slow", on purpose. Go even slower, with more pressure, for even better results. Great video! Thanks for the help!! I got a RCBS Rock Chucker Supreme for Christmas. I'm waiting on my dies to come in, then I'll be going at it. I've been watching tons of videos on reloading, to learn all that I can.
Your knowledge has helped me remove two stuck cases. My thanks to you for sharing your skills. You sir, are amazing!!
The second step worked like a charm. Spent $6.47 at HD for the 1/4”-20 tap with matching drill bit and $0.97 for a 2” matching screw. A couple sockets and washers worked as a spacer and it came right out. No need to order a kit online.
cabronsaim 1/4-20 Tap.
Fixed. It was 1/4 inch. 20 thread :)
Had a 30-06 case stuck in Lyman sizing-decapping die. Drilled with .219 (7/32") bit, threaded with 1/4 x 20 tap, put grade 5 screw through washer and socket, and turned screw into case and out it came as you described. Thanks very much for this lesson.. Lesson #2: use proper amount of lubrication in future sizing operations.
Thank you for sharing! Good day!
Tried the punch method. I am glad I didn't get to aggressive with it. Redding dies have a pin collate that can come loose and remained in casing. Hitting it with a punch would have been costly. However, drilling then tapping worked exactly how explained. Smooth as butter. Thanks for sharing
RodnLori Glenn j
Hey its me again. Your method worked for me like a charm. The decapping pin broke so I will be heading to Scheels tomorrow to get replacements. Too much lube is better than not enough.
that's great! thank you
Good video, very helpful & excellent instructions.
Thank you for taking time to teach. Exactly what I needed.
This video...along with your other ones....have been so helpful/informative. Thank you for putting up content that is in depth and easy to follow. Subbed.
Sir
Used your suggestion for placing die upside down in my turret press. This method will prevent the die from turning when the force is applied to the tapped case head. Was able to remove stuck .30-06 case with the socket and washer method. Many thanks!
Thanks so much for the awesome tips! I haven't encountered having a stuck case yet but I'm sure it's only a matter of time, I've only been reloading for about a year-and-a-half. It is something that I have thought about since I've had a couple of close calls. I feel like you have now equipped me for that eventuality. Thanks again, excellent video and excellent tips!
What do you do when you pull the threads out of the case?
Thanks....have a wildcat custom die, only a few made, got a case stuck for the first time in my 40 years of reloading, this worked!!!!!!
Nice job brother. Thank you for teaching that technique to all of us who needed to learn.
Great video! You just save me $29.00. I just had a stuck case and pounded it out destroying a Redding die and almost damaging my Lee press. I was just about to order the stuck case kit from Midway USA and now I don't have to. I have all the tools here and now the knowledge to remove future stuck cases. THANKS
When running a tap in, it's important to back the tap out 1/4 turn for every 3/4 turn (or so) that you go in. This action breaks loose the chips being pushed up by the thread cutters and moves them into the flutes, which keeps the tap from getting stuck. Also, use a squirt of cutting oil on the tap - it makes the tap much easier to turn, cuts cleaner threads, and your tap will stay sharp a lot longer.
If you were tapping something harder like steel then what you are saying is true, but for something as soft as brass that is not strictly necessary.
@@sghost128 true, but them little bastards find a way to break in the dumbest ways sometimes. Might as well break the chips instead.
Correct. ( Spent 4 spent years drilling & tapping out brass cable glands). Keep speed low on drilling as well.
new reloader here-you are an awesome instructor ,thank you
Great tips! Hope you feel better soon. Thanks for all your excellent videos.
Thanks for the pointer. I just started reloading rifle cases and case #86 just got stuck in the die. Will give this a go.
So after hammering the crap out of my stuck case to no avail, I went to RUclips. This second method worked great even though I has mangled the bottom of the case. Thanks for the tip - I hope I never have to use it again!
Thank you
Bang on video good work. Thanks for sharing. Regards from Saskatchewan
I've never had a tap break by tapping a piece of brass for removal and I've been doing it this way for a long time. I'm not tapping steel. I guess you're right though. Sounds like a good technique. I'll try it out. Maybe it'll be smoother. Thanks for stopping by and leaving your comment. have a good evening! :)
After reloading 10, thousands over the past thirty years I just had my first stuck case man what surprise that was well I tried your punch method first and WOW within a couple minutes I was back to reloading thanks for the info.
Awesome! thank you for the kind words and support!!
Did it just like you said worked just fine. I did it on .223 rem. He misspeaks about the hole size once. remember its 7/32 inch [just under 1/4] i used a 3/8ths in socket for my bushing with 1/4 inch drive. Id also recommend bying different lengths of screws. The more threads you drive in before you start drawing out the casing, the less likely it is the threads will strip.
This works! After seeing this, I actually used the RCBS primer pocket swager that I already had, which comes with almost the identical "bushing" just a tad shorter in height.
hey thanks again for making another helpful viedeo.. i really aprichiate the time you take to make these video's... thank you!!
+Harold Cuebas Thank you!
Just starting my reloading experience and this is great information! Many thanks!
Great video! I did everything except for I kept upsizing my drill bit until I’ve got a shell skin pretty much, tried a screw back out tool. Then ran across your video. Amazing! However mines still very very much in there. So I’m going to use a dremel bit and remove a side, collapse it on itself and then pull it out. Much praying too lol. Sure wish I’d seen your tip before I went all Rambo on mine lol. My cases were even lubed up. Just not fair, especially since I just got my hands on 20 boxes of primers. Ugh lol.
Thank you for taking the time to make this!! So helpful. I have a .223 stuck and a 270 stuck. Lol. Bow I know exactly how to get em out!!
Does the kit work on any caliber? Pistol or rifle?
Worked like a charm! Thanks for the video!
excellent thank you for stopping by
I’ve been reloading for 30 or so years never had a stuck case. But this is good to know in case I do get one stuck. Thanks. I have all the parts to make up a removal tool kit..
Question: after removing the.decapping assembly, can't you just run an appropriately sized drift thru the die to seat on the floor of the case and just hammer the case out? One mild blow I think would do it.
I believe so. thank you for stopping by and support you give my channel. have a great evening!
used method #2 this evening to pull a stuck .223 casing. Once I found the right bolt in my garage stash, was able to get it out no prob. I used a 1/4"-20 bolt. Better than spending the $$ on the tool at Scheels or Cabelas. Thanks so much!!
I'm really liking the reloading vids. Cant wait for the survival vids. Thanks brother!!
Just had my first stuck case. Used the socket. Thanks.
Thank you for producing this video. I made a dummy round to practice with my Handi Rifle and the brass stuck to the walls? I tried the first technique, simple success with the second. I went to Lowes and got the screw, washer, and a tap tool. I'm not sure what else I can tap around here, but that was fun.
thank you for the kind words and support you give my channel. I'm happy this helped! have a great day
You sir are a hero among reloaders
Thank you!
It is 2021 and this video still helping! Thank you!
Hi from France, thanks for your helpful video !
+gilles jill Hello from Arizona! Thank you!
Great video, one question: How did you remove the de-capping assembly? I have an RCBS and I can loosen the pin but it wont come all the way out .
Sweet! Thank you for the support. I'm heading out today to film a survival video! Have a great day! :)
Saved my day from being major brain damage. Thanks for taking your time to save our butts.
Brillant, one of your better vids yet.
How long is your machine screw. I am going to try and fix my brand new 300 blackout die but I may have messed it up. I might just shoot out the stuck case.
Best reloading videos are here!
Thank you
You sir are awesome!!! Thank you for this video
Thanks you just saved me time and money!
Here's a tip from a machinist:
Buy a Tap Wrench.
Turn the tap in reverse to break the chip.
Use a drop or two of oil.
Use a #5 drill for a 1/4-20 tap.
If your tap is DULL replace it.
Thank you!
Good information, much appreciated!
What size drill and tap for a 50BMG/DTC? Serious question
Thank you this video really helped me out a lot!!
Wow! Thank you! I appreciate the kind comment and the support you give my channel... Have a good day! :)
Thanks for the video. My first stuck case lack of Lube! Got it out no problem the expander ball nut an pin stais inside I cut the case with cable cutters no problem
Thank you for stopping by!
Great video,.Very informative. Thanks
Glad it was helpful!
That's awesome how you showed an alternative to buying somebody's product to pull the casing out.
Very good video. ---- Alternative technique: Instead of "backing up" the die with the ram, it is equally effective to clamp a pair of vise-grip pliers onto the die body. The pliers will arrest the die from spinning when they encounter the body of the press. This will allow you to use both hands on the workpiece, instead of having to use one hand to maintain pressure on the handle of the press.
thank you!
Very well explained particularly the self made kit. Thank you.
Thank you!
Alright, you sold me on the lee die. My RBCS thread stripped when I tried to remove a stuck case. Thank for sharing.
Did you ever see the thread in the brass stripped? Can you start over at this point with a larger bit or you are done and need a new die?
+David Cazes Cool! Once in a while I see the brass strip, but not that often. Thank you for the kind words and support you give my channel. Have a beautiful evening!
+jiujitsu2000 in the second method, once the die is threaded in the press upside down I use a piece of broken cleaning rod to push the case out with the ram, just find something to cover the hole in the shell holder. it usually works pretty good, and you save the case.
First technique worked like a charm, thanks and time to use more case lube!
That's great! Glad I could help. Thank you!
Great explanation. I used a tap and a die from a kit. The die instead of the socket, same thing.
Yep this works! Thanks. My 44 mags sometimes get stuck.
A nicely done tutorial.
Well I'm screwed. I tried to use this method and the screw kept popping out stripping the threads in the process. I try again and the hole I drilled keeps getting bigger & bigger to now I just have a hollow brass tube stuck in my 223 hornady resizer die....
How did you remove the case from the shel holder?
good video. just drilled and tapped an .06 case stuck in the resizing die.
thanks!
Thank you for stopping by and sharing your comment. Have a beautiful evening!
after screwing down the black hex screw into the brass, the case didnt back up like its meant to. What else can i do?
Update: got it out! just had to screw down the black hex screw to the very bottom, until you hit the xpander pin.
Thanks man. Great video. I just bought a stuck case remover. I think I bought one before but who knows where it is. ha ha haha. Thanks man.
So helpful! Thank you
Thank you! You just saved me a lot of frustration if I would have found your video earlier I would have saved more lol
Good tips! Keep up the great work!
The RCBS Stuck Case Remover is worth the money and it comes in a die box, so stores where you'll find it easily. When I bought my first press in 1981, my friend the LGS owner sold me a kit with the Rockchucker press. I have used it twice since then and loaned it to a friend once. Well worth the money, I was back in business in minutes. Good video, thanks.
But what if its a short case and the pin has to be removed from the bottom
what if it still has an unused primer and rim came off ?
This saved my bacon. First stuck case is 11 years of reloading.
Good vid. Nicely done. I wish I would have seen this before I destroyed the decapping rod on my new dimension dies.
Thanks! I've learned the hard way before too! Good day!
I got a 300 blk case stuck and the primer pin was sticking out of the flash hole. The sizing ball was stuck in the case after it was sized.. Got any good ideas?
+tires2burn I use this technique on many cases
I got the case out and then used a small tubing cutter to cut the head off & out fell the expander ball.
Was not what I expected. Did not see a broken case that needed to be removed to me the case was stuck. Methods shown to remove stuck case were good
use always good sizing lube and you get no stuck case .:-)
Hornady One Shot does *NOT* fit that bill!
Wrong I still get them time to time and I use case lube
I've been reloading for about 7yrs and never had a stuck case. I used Hornady One shot for the first time on a batch of 20 cases and got my first stuck case about 15 cases in...
Unfortunately, while I have the same Lee die in .308, the punch method is not working for me. On to tapping.
If you have an appropriately sized broken screw extractor and drill bit, that works as well.
I made the mistake of using one shot case lube to lube my die and a casing got stuck but using the punch method worked great. Second time I had a case stuck and I am going to try and salvage my other die. I got frustrated and just used vise gripes and a hammer instead of being calm. The airframer came out in me! I just needed a bigger hammer! :)
Kyle Delorme One Shot is great for running pistol brass through a carbide die on a progressive, and a light spray on a neck brush works great, but for rifle sizing I’d use conventional lube on a pad.
I used the pound it out method. My new decapper/expander tip and adjusting screw will be here in a couple days. Oh, well, I've spent more to learn less.... Lube them cases!