I have an excellent tip for you. Say you need a 900mm flat bar, you would buy a metre long flat bar, cut in into 100mm lengths, then weld together 9 pieces
Muy buenas ideas casi todas, aunque la última es innecesaria ya que sabiendo cargar la pala, no necesita ruedita. Por lo demás, muy bien! ------ Very good ideas almost all of them, although the last one is unnecessary since to know how to load the shovel you do not need a wheel. Everything else, very good!
Some pretty cool little ideas there. At least to incorporate into other ideas. Good job! Now… let's talk about the music… shall we? I was near jumping out of my window and imagining it was on the 10th floor… and hoping that if I really believed it, THAT would kill me?
На 14:15 удивился назначению инструмента. Думал, одна из насадок с "будки для самоубийства", родригез заценил бы) Но инструмент кажется эффективным, должен заметить
Я тако замок делал, он открывается когда на себя дверь сильнее потянешь. Проверено, надо немного больше загиб внутри языка делать, как клюв у орла, тогда на кругляше будет держать при открывнии. А открывать с обратной стороны, так можно с низу в язычку приварить пятак, а с обратной стороны проверить отверстие для толкания этого пятака(защёлки) можно использовать штырь, гвоздь и тд.
This is the sort of thing that YT and the internet was made for. To raise your intelligence and to better yourself. Not look for more utter nonsensical drama that's not in your location.
watching you weld, i think you should seek out some instruction, because it doesn't look good. keep practicing instead of just doing a series of tack welds
Exactly my thoughts... Clean your metal BEFORE you weld all the rust /paint into it... And practice more.. Idea's 6 out of 10 (most are copied from other sites) Welding 2 out of 10
Of course... if you have more money than time... and... if you have access to supply. Many don't. Then there are those who would rather not enrich China's economy at the expense of their own. Lots of reasons to be a maker. I want this guy on my side as the zombi apocalypse approaches, not some couch potato with a remote and a credit card. This guy saved more sh*t from the landfill in one video than most of us discard in a day. I say... BRAVO, Mr Technic! Keep on a makin'.
6:50 - Save some time and buy a brand new one for $4-5 17:20 - Why not just use a ratchet and socket? 🙄 25:30 - Yes, then we can destroy all our tools for no reason. This is idiotic. 27:19 - I have absolutely no words for how stupid that is. 🤣
the idea 1 is frankly bad and it won 't last that long + only under 1 diameter , which makes no sense 2 is too expensive relative to analogues from the store 3 uses constantly 4 only in rainy places where plants have a small root system 5 there are cheaper analogues from the store 5 damage to a cheap tool is no more than 6 option normal , but from quickly the cut needs to be done , what needs to be cut here will not work out because of the thickness of the metal 7 the idea is successful , but it is made because of the gear very expensive to the problems of the idea that it will not work if the bolt is really sour 8 the idea is not applicable to shovels of small cubes because coal or other heavy loose muck is not tolerated in such conditions with the right level floor .
Yeah then you would have to tighten and loosen your vice every single time as well as make sure that your mark is perfect every time before tightening device. There's a reason why they make benders, if you need to pump out a bunch of these twisting your vice a million times is a big waste of time and energy
Good tools and a smart person thank your post... 💪👉👏🏼👏🏼😍👍👍.
Great solutions for problems that dont exist
В любой непонятной ситуации приваривай подшипник👍😁
I have an excellent tip for you. Say you need a 900mm flat bar, you would buy a metre long flat bar, cut in into 100mm lengths, then weld together 9 pieces
Exactly a lot of solutions to problems that I don’t have
Thanks for saving me 27 mins of my life
@@dirtfarmer747211
Thanks👍👍👍
Quá hay. Cảm ơn bạn
Chia sẻ video hay lắm 👍
شكرا جزيلا على الدقة في العمل و بساطة طرح الفكرة.
Gracias por compartir tus conocimientos y videos
Muy buenas ideas casi todas, aunque la última es innecesaria ya que sabiendo cargar la pala, no necesita ruedita. Por lo demás, muy bien! ------ Very good ideas almost all of them, although the last one is unnecessary since to know how to load the shovel you do not need a wheel. Everything else, very good!
Exelente gracias por compartir
Thích thích thích
Glad you trust your welding
Good prep and proper penetration is overrated apparently lol
Because I sure wouldn't
@@davidhattenburg2609 worst welds ever
Super 👍.
Thanks for sharing!
Waouuuuuu 🤗😂😂👍👍👍
Merci j'apprécie beaucoup vos vidéos frères
Gostei,super engenhoso
Видео класс!!! но музыка по голове прям бьёт!!!!
Good 👍👍
Buenas ideas caseras útiles te agradesco
Watchng your vdo 4 d 1st time n i like it. So i jst subcrbd.
Ingeniería de anticipación !!!
.muito bom 👍
I loved every moment of this video 🤸♀️🤸♀️🤸♀️🤸♀️
Love the creativity on display here.
Like we knew you would.😄
If you can drill a wrench you have quality tools
Awesome ideas 💡. Subbed 👍🇺🇸
Some pretty cool little ideas there. At least to incorporate into other ideas.
Good job!
Now… let's talk about the music… shall we?
I was near jumping out of my window and imagining it was on the 10th floor… and hoping that if I really believed it, THAT would kill me?
На 14:15 удивился назначению инструмента. Думал, одна из насадок с "будки для самоубийства", родригез заценил бы)
Но инструмент кажется эффективным, должен заметить
Excellent 👍
Congratulations my friend I am amazed!!!
Thank you very much!
As suas ideias são maravilhosas e um trabalho não tão simples assim valeu tudo de bom
Excelente video gracias x enseñarnos
its another great idea thank you for sharing
बहुत ही काबिले तारीफ हुनर है आपके हाथ में । आपका प्रोजेक्ट बहुत ही अच्छा लगा । धन्यवाद
very good idea as a result it is very useful tool for making rings / stirrups 👍👍
Мега лайк
Alangkah lebih bagus bila ditambahkan cat/pelapis.
Trimakasih untuk ide nya.
You make vacuum cleaner pipe one for drill bit all the dues vacuum by vacuum cleaner
Galing👍
sir, post a video for sliding gate double latch
Very very good work 👍👍👍 on
nice
6:50 👏👏👏👏
Good work 👍👍👍👍👍👍
Where did you find that pinion gear for the slide hammer? I've been looking for that gear for a project.
Certain. A shame to use it for that as it can be replaced with any object that has weight.
Co bán ko anh oi
spent more in electricity, materials and time building that door latch then it would have been to pay 4 bucks for one. lol
Maybe he didn't have 4 bucks
I bet you one you buy wouldnt be as good
Said it before, say it again. Never weld a bearing!
Good job
The shovel hack reminded me of my new sneakers that made me run faster...
А как такой запор с наружной стороны открывать?
El vídeo de mas cosas voludas o inservibles que vi ,parece un chiste ,cuando lees y que dice buenas ideas
отличный замок на втором видео а если захлопнулся за тобой как с той стороны открыть??
Я тако замок делал, он открывается когда на себя дверь сильнее потянешь. Проверено, надо немного больше загиб внутри языка делать, как клюв у орла, тогда на кругляше будет держать при открывнии. А открывать с обратной стороны, так можно с низу в язычку приварить пятак, а с обратной стороны проверить отверстие для толкания этого пятака(защёлки) можно использовать штырь, гвоздь и тд.
I only realized at 9:45 you were the Tyr It Out guy, keep 'em high and tight jeans, see you in may, and it's hot out so remember to drink water!
Verynice
Nice bro 😄👍🙂 please 🙏 hlp
Nice 👍❤️❤️
Demo videos don't need a stupid music track! Raising awareness.
The shear idea is good but not perfect, good job.
This is the sort of thing that YT and the internet was made for. To raise your intelligence and to better yourself. Not look for more utter nonsensical drama that's not in your location.
что за болезненная страсть, сваривать подшипники, ключи, резьбы?...
Calling this a painful passion hahaha these comments are gold!
1st vote for #1.
watching you weld, i think you should seek out some instruction, because it doesn't look good. keep practicing instead of just doing a series of tack welds
Exactly my thoughts... Clean your metal BEFORE you weld all the rust /paint into it... And practice more..
Idea's 6 out of 10 (most are copied from other sites)
Welding 2 out of 10
Great ideas, now I just need a shop and all the tools to do that. $50-100k
Ну этот рукоблудец хоть не красит свои извращения перед тем как выкинуть
Автору срочно вручить "Орден Святого Полуляха" !
You spent many hours and lots of cash....to make a $2 gate latch! 😂
He probably had the material, the skill , time and tools to do this in the comfort of his own home, why waste the money
Mr. Technic got his music from Mr. Techno!😂🤣😂🤣
10:57
Доктор после просмотра этого видео, рыдает над взорвавшимся полнохуйняметром....
Доктор шкалу новую заказывает в наноляхах
о, сварка подшипников?! срочно вызывайте экзорцистов!
Проеб времени, думал последнее будет по-любому что-то годное, но блять там оказалась лопата... Серьезно подшипник+лопата Карл..
По ходу у человека много металлолома. Проще сдать металлолом и купить инструменты.
woow
Even with modern day tools, still third world.
Por qué se gastan haciendo éstas pavadas.!?
😁
I've never seen a round saw blade with out a center hole. 🤔
Защіпка працює тільки в 1 сторону,а назад тоді як?)
Exceptional nonsense. Such inventions are useful on a desert island.
Ппц. Столько вопросов, но самый главный нафига
You spend alot of time making things that would take less time and money to buy
Of course... if you have more money than time... and... if you have access to supply. Many don't. Then there are those who would rather not enrich China's economy at the expense of their own. Lots of reasons to be a maker. I want this guy on my side as the zombi apocalypse approaches, not some couch potato with a remote and a credit card. This guy saved more sh*t from the landfill in one video than most of us discard in a day. I say... BRAVO, Mr Technic! Keep on a makin'.
👍👍👍👍👍👍👋👋👋👋👋👍👍👍👍
Thrs
good ideas but a very brutal worker
Why is that?
@@MrTechnic you weld directly steel to a bearing and tongs and precision is also not yours. but your ideas are good.
E, това последното, с лагера заварен за лопатата, направо изби рибата...!
15:00 . . Bend the end of that very cheap and nasty spanner!
Док дью где ты?
6:50 - Save some time and buy a brand new one for $4-5
17:20 - Why not just use a ratchet and socket? 🙄
25:30 - Yes, then we can destroy all our tools for no reason. This is idiotic.
27:19 - I have absolutely no words for how stupid that is. 🤣
сюда нужен доктор дью
@Доктор приди сюда
those are some of the worst welds I have ever seen
какой из тебя диайвайщик если ты варишь подшипник сварщик невпизд?
Really annoying music which detracts from the video. Such a shame!
Such awful monotonous musak, thank goodness for the mute button
the idea 1 is frankly bad and it won 't last that long + only under 1 diameter , which makes no sense 2 is too expensive relative to analogues from the store 3 uses constantly 4 only in rainy places where plants have a small root system 5 there are cheaper analogues from the store 5 damage to a cheap tool is no more than 6 option normal , but from quickly the cut needs to be done , what needs to be cut here will not work out because of the thickness of the metal 7 the idea is successful , but it is made because of the gear very expensive to the problems of the idea that it will not work if the bolt is really sour 8 the idea is not applicable to shovels of small cubes because coal or other heavy loose muck is not tolerated in such conditions with the right level floor .
У меня только один вопрос где ты находишь это жравое говно? О остольном я даже молчу
Додивився до моменту де приварили металевий прут до підшипника. Висновок - дивитися далі не буду.
The rods could have been bent just as easy in your vice that was holding your tool that you made. Duh
Yeah then you would have to tighten and loosen your vice every single time as well as make sure that your mark is perfect every time before tightening device.
There's a reason why they make benders, if you need to pump out a bunch of these twisting your vice a million times is a big waste of time and energy
prutsbear