Checking out an import lathe and putting on a 4 jaw chuck. Indicating the spindle. The Morse taper 3 in the headstock has a bit too much runout for me. The faceplate is very good.
Thank you Jaap, for this very good informations about the lathe. After watching the videos I've ordered one and as a beginner I'm happy with the accuracy I can reach at the moment. The biggest "tolerance" ist the person in front of the machine at the moment. Have a good time in your shop. best regards
Vielen Dank für den Tipp mit der Reinigung der Riemenscheiben und des Riemen. Auch meiner ist verschmiert und ich habe die Maschine erst 4 Wochen.....lg Holger
Hallo Jaap I have the same problems. In The first i sell an MK hohnig Tool an the first problem ist fixt. Then i mountet the Chuck and grind the arms vom the Cuck inner an auter. It wast a long time Job to kame in 1/100 mm Thanks vor the video
Hi there. I have a question for you about this lathe and if it's worth the money? I'm a beginner and I will mostly turn resin and small metal pieces. Will this lathe do and is it accurate enough for serious hobby work. Hope you can answer my questions best regards H
Hi, Im thinking about getting this lathe too ... have you since measured the outrun on a bar ? And did you get the tailstock offset fixed ? Would you recommend this lathe? Thanks for the info ;)
your ruler test doesn't mean anything, centers are not conical to the point. that is to say, the point geometry can be variable in the spec, only the cone surface behind the point is 60% between some tolerance. the point is not a critical dimension.
Thank you Jaap, for this very good informations about the lathe. After watching the videos I've ordered one and as a beginner I'm happy with the accuracy I can reach at the moment. The biggest "tolerance" ist the person in front of the machine at the moment.
Have a good time in your shop.
best regards
You're welcome
Vielen Dank für den Tipp mit der Reinigung der Riemenscheiben und des Riemen. Auch meiner ist verschmiert und ich habe die Maschine erst 4 Wochen.....lg Holger
Hallo Jaap
I have the same problems.
In The first i sell an MK hohnig Tool an the first problem ist fixt.
Then i mountet the Chuck and grind the arms vom the Cuck inner an auter.
It wast a long time Job to kame in 1/100 mm
Thanks vor the video
There are so many chucks online.
Do you have a link or specific specifications for the chuck?
I want to buy that 4 jaw chuck.
Hi there. I have a question for you about this lathe and if it's worth the money? I'm a beginner and I will mostly turn resin and small metal pieces. Will this lathe do and is it accurate enough for serious hobby work. Hope you can answer my questions best regards H
I think it is worth the money...if you want a better machine, you pay double the price...
Хороший обзор.Супер у самого такой же станок на моем канале WM210V. Лайк и подписка!
Lindo torno moderno
Hi,
Im thinking about getting this lathe too ... have you since measured the outrun on a bar ?
And did you get the tailstock offset fixed ?
Would you recommend this lathe?
Thanks for the info ;)
The lathe is o.k. for the price, but if you need a precision machine, you have to check for runout, linearity and parallelism, like I did.
Thread cutting on a lathe holzmann ed 400
where did you buy the 4 jaw chuck If I may ask ? Thanks
I bougt it from Ebay, I forgot where, I'm sorry
Get rid of that bloody music! Apart from that good video . John
Hi Jaap,
where is the PART3 ?
Thanks!
Working on it.
I'm working on it
me interesa comprar este torno que tengo que hacer para comprarlo?
www.holzmann-maschinen.at/ES/productos ordenar y pagar...?
your ruler test doesn't mean anything, centers are not conical to the point. that is to say, the point geometry can be variable in the spec, only the cone surface behind the point is 60% between some tolerance. the point is not a critical dimension.
Yes you are right
when Part3 .
Working on it
Is it Chinese made?
Yes I think so
I don't like the music 😄
Neither do I