well........ actually, it does. in thailand, as well as other asian countries that run these propulsion systems, the water is salt or brackish, very rarely fresh and pure. a mild steel pipe (basically what the kkk or sps prop shaft tube is) will corrode rapidly in those conditions, so in those countries they do pump the housings and the shaft housing full of grease until it escapes from the shaft bearing, to prevent any salt water from getting inside the tube. the grease is not a lubricant, just a water displacer. the cheapest grease would be used, probably rancid yak fat... the grease cups would get rotated on a schedule and refilled when empty. the system would constantly leak grease into the environment, hopefully just the rancid yak fat and vegetable oil... and families would depend on these things for their existence. they had to be cheap, reliable, economical to run and long lasting. but in 'murica, people get tired of their new toys quickly and throw them away, so that part wasn't shared with you. they also tend to run in fresh water and don't leave their motors in the water all of the time. on my old kkk i've never run it filled with grease and i only use it in fresh water. i take it apart to inspect it yearly and it's still corrosion-free. bought it in the 90's
The model i have is a gx200 tqx2. I didn’t know they sold a low rpm model because I would have got it ,but I will tell you this with the after market muffler,jet,springs and air filter this thing looks and performs awesome
@@801Outdoors actually happened to me one time because i didnt put the lagbolts in (was a normal outboard though ), engine hung on the steeringrod so i got it back on the boat but gotten dunked running at wide open trottle anyway , that was a costly mistake to fix (push pull steeringrod was bend prop taken a chuck of fiberglass out of the boat ) , engine never was the same after that and a lot of the moving components seized up a few times over the period i owned it (ignition retard trottle etc)
![FNAF vs TF2 - Episode 2 [SFM]](http://i.ytimg.com/vi/z5b3V2-VLb0/mqdefault.jpg)
You ought to extend the transom bracket to take advantage of the 4 holes as supplied on the boat transom
It’s gonna be sweet. A nice job well done. One these day I will build one myself. Thanks, for the nice video it’s give me some ideas.
That's a pretty cool setup man you don't see that too often at least around here the matter of fact I don't think I've ever seen that here
Dang its loud so can it be control to be quiet?
Good afternoon, could you give me information where I can buy this type of engine
3:03 When you hear the airbus engine instead of longtail engine 🤣🤣👍
Live right over a airport lol
Where can I buy mud skipper long tail???
Cool man
👍👍👍👏👏
Where can I order this item I want to buy like this
Can you do another video about this mud motor set up please? I am looking to make one of these set ups and I have a Honda 4 hp.
fast engine
Hello dear friend! Where can I buy a kit such LONGTAIL? Please write a link to the seller’s website!
Aleksandr Abramov www.mudskipper.com thanks for watching
Mantap
What is the weights of fan and how many wing
Supper
The grease in the housing is the only fitting to insert grease ? Is that same grease suppose to ride down into the entire shaft ?
no the shaft does not require grease
well........ actually, it does. in thailand, as well as other asian countries that run these propulsion systems, the water is salt or brackish, very rarely fresh and pure. a mild steel pipe (basically what the kkk or sps prop shaft tube is) will corrode rapidly in those conditions, so in those countries they do pump the housings and the shaft housing full of grease until it escapes from the shaft bearing, to prevent any salt water from getting inside the tube. the grease is not a lubricant, just a water displacer. the cheapest grease would be used, probably rancid yak fat... the grease cups would get rotated on a schedule and refilled when empty. the system would constantly leak grease into the environment, hopefully just the rancid yak fat and vegetable oil... and families would depend on these things for their existence. they had to be cheap, reliable, economical to run and long lasting.
but in 'murica, people get tired of their new toys quickly and throw them away, so that part wasn't shared with you. they also tend to run in fresh water and don't leave their motors in the water all of the time.
on my old kkk i've never run it filled with grease and i only use it in fresh water. i take it apart to inspect it yearly and it's still corrosion-free. bought it in the 90's
I have the motor please send me the link what motor kit I need
Nice what website did you find the stuff at I want to try an build one just like this an is it pricey?
mudskipper.com
How much sir tail long kit thnks
Which Honda GX200 model you use
(LHB 2 (LOW RPM 1800 RPM))
The model i have is a gx200 tqx2. I didn’t know they sold a low rpm model because I would have got it ,but I will tell you this with the after market muffler,jet,springs and air filter this thing looks and performs awesome
@@801Outdoors thanks
Good
That is freaking dopppppe
Some question sir Can i ask ????
ask away
can't wait to see it in action
in philippines the have a materials?
Bag bisa konfirmasi lagi bag
Where can I get this kit
Hi sir... I have a problem this machine
Quanto é o preço longtail
Para Panamá quiero conseguir una pata de estas como ago
HI SIR CAN YOU SEND ME THE LINK AS I WANT THIS ENGINE TO BE DELIVERED IN INDIA.
Did anyone else notice the chrome piece says kkk🤣
Batang sap bot galah bergegar
That bushing isnt going to last long running it out of the water..
Speed
🤣🤣🤣🤣
Has it worked ok on this boat?
its worked great have alot of video to put up
Bisa krim ke indonesia
Can u help me?
Naitaji rakini nipo tazania
Alguna dirección donde los pueda conseguir
Hi
200cc and just 6.5 hp? an XR 200cc motor is about 13-15 hp....
Giá bao nhiêu 1bo
I noticed you got this from KKK. How much for kit and shipping?
Roger Smith EBay shipping was free
Je veux acheter 2 moteurs au Maroc
hope you bolt that engine down to the boat or it will flip of the mounts and end up in the lake
watahyahknow wow that’s a bummer man sorry you’re engine flipped off your boat and ended up in the lake
@@801Outdoors actually happened to me one time because i didnt put the lagbolts in (was a normal outboard though ), engine hung on the steeringrod so i got it back on the boat but gotten dunked running at wide open trottle anyway , that was a costly mistake to fix (push pull steeringrod was bend prop taken a chuck of fiberglass out of the boat ) , engine never was the same after that and a lot of the moving components seized up a few times over the period i owned it (ignition retard trottle etc)
@@watahyahknow im going to bolt mine down for sure thanks for the tip
toi muon mua may nay o dau vay
Minh Hai b mua đc chưa
Blue Locktite ..... Folks .
Cheap insurance .
Ne-uh wrong engine. Add a second cylinder to that
Muốn mua bộ đuôi này ak
Mua dc chưa
+huong duc chưa
Luyen Truong tìm ních VJET NGUYEN mua
Luyen Truong bộ đuôi này bao nhiêu vậy
+Trượng Phan chưa
Someone should tell that company what KKK means here. I don't think they know.