I might have an oilcooler..i think its for an 230, but its look like the same size. I will check it out tomorrow. Btw, i live in Sweden, and if you pay for the shipping, its yours for free! :-)
Hello :)! There is some time I would like ask to you about, I hope you will don't take it bad. So, why are you using the dremel with a metal brush for cleaning the aluminium part? It's a thing i often see, and it always a paint to watch it as it scratch and alter the aluminium surface in the process. Why don't you use instead some soda blasting on the aluminium part, it's a good compromise for removing greases film and contaminant as paint. That's especially really effiency for cleaning sensitive part as carburators. Always found it (little ;)) damaging your overall resaerch of high quality and clean as possible restaurations. Otherwise, as usual, good continuation to you ;)!
Nice. But use the original Nuts and Bolts back on t he engine. Hate seeing Made in China bullshit on classics. The quality of German steel is so much better than today's made in china stuff :/
You should know it's easy and hard to make that much profit. I say EASY because it's very possible to make that much, and Hard because you'll need professional assistance to do it, I'd suggest you get assisted by a market advisor.
I can't disclose too much, but yea I've been using a coach called 'Mrs Mary Margaret Refior and through her guidance, I've been able to make approx. $24,000 in dividends on a monthly basis, it is pretty straightforward, not as complicated as it used to be.
@Andrea Stefano You don't need to be surprised Andrea because I'm also trading with Expert Mary Margaret Refior she helped me recover all that I lost trying to trade by my self.
4:53 oi, those timing chain sprockets are really really worn. See the way they are bent over and even broken at the tips? Might want to think about replacing those. Great episode.
Despite that, for the age of the engine it seems pretty well taken care of. Sure they get old and worn out and replacement would do it good, but I'm surprised at the lack of well, destruction here.
@@RestoreIt Well, if the client doesn't want to shell out money for a new part, you might be able to do this: If the sprocket is simply keyed to the cam AND if the hub is symmetrical (no offset) you could turn the sprocket around and gently file the tips that are gnarled over so the chain seats nicely. Just don't forget to transfer any timing marks to the other side of the sprocket too. That will buy some time before the part fails.
Hey man look on autodoc for the oil cooler and you can get one for a w116 Is not the exact one and it has top and bottom inlet/outlet connection but with some slight modification you can make it fit. I did it on my w123 and it sits nicely. Good luck
Hey man! I've seen some pretty gnarly injuries from using a bench grinder/wire wheel without gloves. It makes me scared when I see you do it.... Stay safe
ive been in a hurry before and once had my index fingered sucked into a bench grinder. it doesnt happen twice. get some pliers and gloves. it aint worth the pain and inconvenience of healing....
Will you replace the starter motor brushes as a sort of preventative maintenance or are they not really worth replacing until the starter stops working properly?
For the love of god please wear a respirator when sanding, cleaning and de-rusting surfaces :/ Love your videos I have already learned a lot about Body work and welding just from watching your work :)
there are people who make custom oil coolers and radiators for very cheap...overhere in Portugal you would be looking at about 200€ tops for a custom oil cooler in aluminium and very similar to the original....
I would go with Hydroblasting to clean up the parts , it also takes off rust and doesn’t leave pitting like sand blasting. Didn’t know about Ice blasting before this video.
This dinky dink neighbor had a 300CD in wonderful condition someone GAVE him!He knew nothing about cars and even less about Mercedes Benz!When it became obvious he was just going to tear the car to nothingness I decided to set him straight...good God almighty I came close to violence before he came to his senses and sold to a man who,at least,knew how to deal with such an automobile.Neighbor got $1000 out of it and this wonderful car got a new lease on life!
Hello !… J’savais même pas qu’il y avait des 5 chez Merco ! V’la la pollution avec tout ces produits chimiques , mais c’est le résultat qui compte. J’en remets une couche, vidéo pas finie 😿
I can only imagine what you could do with a 500 Watt Laser Cleaning machine. You would save many hours of time. Not sure how expensive they are. Have you considered one?
The black paint on the bell housing is overspray from the factory, and wasn't necessary to remove. The shift linkage was a non coated steel when new, and was never painted. Only a yellow inspection paint mark on each end would have been present. The Exhaust gas recirculation pipe is stainless steel, and was left bare when new. It was not painted. However, the nuts on each end were yellow zinc plated. In addition, the top of the EGR valve was yellow zinc, not clear zinc (silver). The fan and pulley on the alternator were clear zinc plated when new. They were never painted.
Just a friendly. Never grind valve covers or manifolds unless you flatten them before install. Since you haven’t done that yet I would recommend it. Good job on it so far.
´the wire whell doesnt take off material...i use it in the shop to clean off old gaskets and sealer on valve covers and sumps and if you look closey it doesnt even remove the machining marks...you just have to use a not very aggressive wire wheel and dont force it, obviously
I was searching and looking forward to the dry ice blasting video, but it’s nowhere to be found despite that this deep clean video is already 6 months old.
I wee people spend thousands on these cars getting them like new, then selling them for a lot less than it cost them to do so, just to keep them there. That model next to the rover p6 are worth saving for what they taught us.
great going champ 🤜🤛 as for the cooler, get a reputable radiator joint and ask them to either repair the one you have or make a better one (more cores) usually they come up with a better bigger and more durable solution also look up forums until then, keep the grrat content coming 🥃🥃
May I ask what the make and model is of that steam cleaner? I may want to purchase similar equipment if it's within my budget. Thanks for another great video!
Very satisfactory to watch, all though I was just at the dentist today and removed a tooth and that high pitched dremel sound brought back bad memories. 😳😁
Great job! Just wondering, where does the grease go when you steam clean? I expected to see it dripping off but it seems to just evaporate or disappear?
It's funny that we still call that a rocker cover even though there may not be rockers under it. Someone smarter than me ought to come up with a better name for it.
I also restored a M110. I think you won't get around redoing the head. Valves, valveseals, valveseats, resurfacing, you know the drill... Should be around 2000 Pounds
Curious if you know Sandro over at Auto Craft Car Detailing in Melbourne. He’s practically the best detailer in the developed world. Look him up and his channel up. You guys deserve to have a beer together.
Where do you leave the water with the paint remover? and which rust remover are you using? Here in the netherlands I can almost choose of just 1 remover and 1 reformer..
I agree with degreasing and steam cleaning but I would have covered alternator and ignition distributor & other sensitive parts..also rubbing with the dremel and the rotating brush the alloy head cover is not a recommended treatment, hope it was at least a brass brush, not steel
I might have an oilcooler..i think its for an 230, but its look like the same size. I will check it out tomorrow. Btw, i live in Sweden, and if you pay for the shipping, its yours for free! :-)
For the cooler, could you use a fin comb tool to straighten the fins and repaint the outer housing?
My goodness! You are clearly a very patient & painstaking man!
I cant wait for the E30 to finish
Hello :)! There is some time I would like ask to you about, I hope you will don't take it bad. So, why are you using the dremel with a metal brush for cleaning the aluminium part? It's a thing i often see, and it always a paint to watch it as it scratch and alter the aluminium surface in the process. Why don't you use instead some soda blasting on the aluminium part, it's a good compromise for removing greases film and contaminant as paint. That's especially really effiency for cleaning sensitive part as carburators. Always found it (little ;)) damaging your overall resaerch of high quality and clean as possible restaurations. Otherwise, as usual, good continuation to you ;)!
I was going to mention the same thing. You especially don't want to on the mating surfaces.
Hi,
What brand of wire wheel do you use for the dremel?
I bought some, but they fell apart in a few seconds of use.
Aliexpress 2 ~ 5min use (buy set x100)
Nice...👍.
What’s the steam cleaner you’re using?
What am I missing here? 5 cylinders with 6 exhaust ports?
Hey I have an idea about the rad you want replacing.
6:38 não fica bravo não.
Привет из России !
Nice.
But use the original Nuts and Bolts back on t he engine.
Hate seeing Made in China bullshit on classics. The quality of German steel is so much better than today's made in china stuff :/
Wear a mask... you are breathing in all that metal dust !!!!
And potential Asbestos in the gaskets
I have about 5% of my portfolio in uranium stock any advice on any other stock that I can grow my $300k capital to a million dollars?
You should know it's easy and hard to make that much profit. I say EASY because it's very possible to make that much, and Hard because you'll need professional assistance to do it, I'd suggest you get assisted by a market advisor.
I can't disclose too much, but yea I've been using a coach called 'Mrs Mary Margaret Refior and through her guidance, I've been able to make approx. $24,000 in dividends on a monthly basis, it is pretty straightforward, not as complicated as it used to be.
@Maxwell Cannon You can message her on this number below
+𝟭𝟯𝟰𝟳𝟲𝟲𝟳𝟬𝟭𝟯𝟱
@Maxwell Cannon WHATSAPP
@Andrea Stefano You don't need to be surprised Andrea because I'm also trading with Expert Mary Margaret Refior she helped me recover all that I lost trying to trade by my self.
4:53 oi, those timing chain sprockets are really really worn. See the way they are bent over and even broken at the tips? Might want to think about replacing those. Great episode.
Thanks Daniel, I wish this was my project haha. I'd replace so much. But cheers I'll tell the owner and see what he says...
Despite that, for the age of the engine it seems pretty well taken care of. Sure they get old and worn out and replacement would do it good, but I'm surprised at the lack of well, destruction here.
@@RestoreIt Well, if the client doesn't want to shell out money for a new part, you might be able to do this: If the sprocket is simply keyed to the cam AND if the hub is symmetrical (no offset) you could turn the sprocket around and gently file the tips that are gnarled over so the chain seats nicely. Just don't forget to transfer any timing marks to the other side of the sprocket too. That will buy some time before the part fails.
@@danielprivate7442 damn, thats a neat idea actually.
I work as a mechanic and have 9 years of skill from Algeria. I am looking for a job in your country. I like your country very much. I am 29 years old.
Hey man look on autodoc for the oil cooler and you can get one for a w116
Is not the exact one and it has top and bottom inlet/outlet connection but with some slight modification you can make it fit.
I did it on my w123 and it sits nicely. Good luck
Hey man! I've seen some pretty gnarly injuries from using a bench grinder/wire wheel without gloves. It makes me scared when I see you do it.... Stay safe
ive been in a hurry before and once had my index fingered sucked into a bench grinder. it doesnt happen twice. get some pliers and gloves. it aint worth the pain and inconvenience of healing....
@@dietsausage1 I was always taught not to use gloves on a bench grinder because it can suck your hand into it. I honestly don't know which is correct.
Me too. It made me cringe.
@@ridethroughlifertl yeah, i just use them in case the tool slips
Don't use gloves, a thread from gloves caught in the wheel is far far worse than it just catching your bare skin
that was so interesting ! i wish i had all the tools and spacework to get similar stuff done too
Will you replace the starter motor brushes as a sort of preventative maintenance or are they not really worth replacing until the starter stops working properly?
For the love of god please wear a respirator when sanding, cleaning and de-rusting surfaces :/ Love your videos I have already learned a lot about Body work and welding just from watching your work :)
there are people who make custom oil coolers and radiators for very cheap...overhere in Portugal you would be looking at about 200€ tops for a custom oil cooler in aluminium and very similar to the original....
I would go with Hydroblasting to clean up the parts , it also takes off rust and doesn’t leave pitting like sand blasting. Didn’t know about Ice blasting before this video.
Your videos are always great! As an old Mercedes fan I loved it.
This dinky dink neighbor had a 300CD in wonderful condition someone GAVE him!He knew nothing about cars and even less about Mercedes Benz!When it became obvious he was just going to tear the car to nothingness I decided to set him straight...good God almighty I came close to violence before he came to his senses and sold to a man who,at least,knew how to deal with such an automobile.Neighbor got $1000 out of it and this wonderful car got a new lease on life!
What kind steam cleaner did you use?
Excellent video.
Kärcher SC4
a couple of old welding sleeves would keep your arms clean from dirt and rust...
Hello !…
J’savais même pas qu’il y avait des 5 chez Merco !
V’la la pollution avec tout ces produits chimiques , mais c’est le résultat qui compte.
J’en remets une couche, vidéo pas finie 😿
I can only imagine what you could do with a 500 Watt Laser Cleaning machine. You would save many hours of time. Not sure how expensive they are. Have you considered one?
The black paint on the bell housing is overspray from the factory, and wasn't necessary to remove.
The shift linkage was a non coated steel when new, and was never painted. Only a yellow inspection paint mark on each end would have been present.
The Exhaust gas recirculation pipe is stainless steel, and was left bare when new. It was not painted. However, the nuts on each end were yellow zinc plated. In addition, the top of the EGR valve was yellow zinc, not clear zinc (silver).
The fan and pulley on the alternator were clear zinc plated when new. They were never painted.
Just a friendly. Never grind valve covers or manifolds unless you flatten them before install. Since you haven’t done that yet I would recommend it. Good job on it so far.
´the wire whell doesnt take off material...i use it in the shop to clean off old gaskets and sealer on valve covers and sumps and if you look closey it doesnt even remove the machining marks...you just have to use a not very aggressive wire wheel and dont force it, obviously
Huh…my feed on this vid is full of ads for some sort of erectile dysfunction drug. Guys, doncha think that vids like this are better than Viagra?
Which steam cleaner are you using? I've been debating on getting one for my own projects.
He was telling that SC4 which is a karcher steamer
I was searching and looking forward to the dry ice blasting video, but it’s nowhere to be found despite that this deep clean video is already 6 months old.
just so everyone understands things. w-123 is a chassis style. there could be any number of engines, gasoline or diesel installed....
Do not use bosch spark plugs. This part is poor on quality. Or keep that in mind.l if there will be misfire.
I wee people spend thousands on these cars getting them like new, then selling them for a lot less than it cost them to do so, just to keep them there. That model next to the rover p6 are worth saving for what they taught us.
great going champ 🤜🤛
as for the cooler, get a reputable radiator joint and ask them to either repair the one you have or make a better one (more cores)
usually they come up with a better bigger and more durable solution
also look up forums
until then, keep the grrat content coming 🥃🥃
May I ask what the make and model is of that steam cleaner? I may want to purchase similar equipment if it's within my budget. Thanks for another great video!
Very satisfactory to watch, all though I was just at the dentist today and removed a tooth and that high pitched dremel sound brought back bad memories. 😳😁
Please include window seal replacements in a future video! I have a 300CD and love these videos so far.
You can use a fin comb for radiators on the oil cooler.
It’s worth to remove oil pan clean all and inspect shaft bearings 👍🏻also valves?
Don't use caustic degreaser. It will severley attack the aluminium.
Very satisfying to watch! Awesome work
Great job!
Just wondering, where does the grease go when you steam clean? I expected to see it dripping off but it seems to just evaporate or disappear?
It drips down. You can see he has a large pan under the engine to catch it.
The valve guides and seals wear out on these. He should have redone those and looked at the tensioner guides at a minimum
As always, a great restoration 👍
I appreciate how his clips don't have unnecessary music playing on them
Awesome content! This project is turning up pretty great
Great progress, looking forward to the next episode. Once again, great camera work.
Open connections on the K-jetronic fuel system cant be good?
Living one of my ADD dreams. I wish i was doing this so bad lol
Keep dirt there don't matters.. Still working 😢
I didn't know such a thing as ice blasting existed.
...lookin' good ,stay safe and have a great week....
Cheers Bob, you too!
I used to work on loads of those 110 engines years ago, always needed valve guides and seals.
I always enjoy watching you work. a nice job like always.
You must go through a hell of a lot of the small rotary wire wheels ?
It's funny that we still call that a rocker cover even though there may not be rockers under it.
Someone smarter than me ought to come up with a better name for it.
Valve cover?
Excellent restoration
I like the way this gentleman works keep it up
Hit the word "more" beneath the film site.
I honestly don't care about the ED medicine ad. Irrelevant on a car repair channel. But that's just my opinion. Honest feedback.
Hey bro, we all feel very manly working on our cars, but I don't understand why you don't protect your hands while working with the grinder 7:50
U missed replaced water plug pastile
Restaurering? Ommålning hade jag inte lagt tid att titta.
I also restored a M110.
I think you won't get around redoing the head. Valves, valveseals, valveseats, resurfacing, you know the drill...
Should be around 2000 Pounds
Always makes my day seeing an upload from you 😊
Curious if you know Sandro over at Auto Craft Car Detailing in Melbourne. He’s practically the best detailer in the developed world. Look him up and his channel up. You guys deserve to have a beer together.
2.8 6 cylinders M110
Nutela... too worried not to get dirty
Where do you leave the water with the paint remover? and which rust remover are you using? Here in the netherlands I can almost choose of just 1 remover and 1 reformer..
I agree with degreasing and steam cleaning but I would have covered alternator and ignition distributor & other sensitive parts..also rubbing with the dremel and the rotating brush the alloy head cover is not a recommended treatment, hope it was at least a brass brush, not steel
What is the name of this steamer ?
great video but i would change the title to mercedes m110 (.924?) engine rebuild
Great job. Cheers 👍
3 wks! What going on?
The fins of the alternator also have to be zinc plated, the exhaust manifolds are originally ceramic coated in a light grey paint ( almost white)
That L800 part, is that an oil cooler? That seems ridiculous if it is.
bonjour
pouvez activer les sous titres svp ?
merci
Je suis surchargé de travail en ce moment mais je m'y mettrai dès que possible. Ou faire participer quelqu'un d'autre. À votre santé
for the heat exchanger, why not use one of those "combs" to pull the metal fins straight again?
I'm looking forward to the ice blasting results!!!
Kärcher show
Grit job man
Better plug up those ports to prevent contaminating the combustion chambers mate
Awesome information to restore that engine back to new condition.
I see you still have a Titan paint stripper can from Spain!
what are some of the bands you are listening to on your headphones?
Dude, what about the BMW E30 cars. You still haven't finished patching their Chassis and put them back together. What gives.
I mean, I was taught to finish what I started before I started on my next project
Steam cleaner? That’s thing is what my wife cleans in the house with
I am kind of hoping to see you take on the automatic transmission
nice job did you look on ebay for that alternative thing?
👍👍🌺
just repaint and cleaning!!! not restoration!!!
What rust converter did you use please?
👍
Restorarion? Clean and paint? Ehh not good
Why do you use a CHEAP OIL 🤮🤮