Thanks very much for the video. Very helpful. I would very much appreciate a video on setting up a stabilized Rx...such as a SR10 plus+. Thanks again and happy New year!
Great video, wish I had seen it before I upgraded my X20S. Stabilized receiver setup will be helpful to many as the new process can cause some headaches if you miss a step or don't notice there is more information that requires you to scroll to access.
Great video and thank you, this will help a lot of people. Wish I had this video sooner, would have made the upgrade easier. I think it would be a great help for everyone to do a stabilized receiver setup as well as an SxR. Thank You!
Thanks for the video Juan! I'm holding off for a bit on 1.6.0 and currently on 1.5.9, but I saved the video for when I make the switch. And yes, it would be great if you did one on setting up the stabilized Rx's. Thanks again!
Great video - thanks for all your efforts. I would love to see a video for updating the TD SR10 receivers - I have 5 to do once I update my transmitter. Will they have to be removed from the models to update them?
Thanks! I'm currently working on a "How to setup a Stabilized Receiver" video starting from scratch. For an existing model that was setup prior to 1.6, you will need to redo the calibrations and double check other parameters. If you're able to move the model to the required position during the calibration, you could keep the rx in the plane.
Watching since I think the update process is one of the only drawbacks to this transmitter. I have radiomaster with edgeTX same issue with firmware updates never as simple as Spektrum lol
Nice vid, Juan! Do you use the X20S for everything? I've been a longtime Futaba fan, but picked up an X20S a few months ago. I started swapping planes over recently, but hesitant on using it with my big gassers. I know people are using these radios on $20K+ turbines....still hard for me to get over the hump to trust it lol.
I came from a long run with Futaba as well. I started with FrSky on a few smaller planes and am only using non stabilized rx's currently, but found the TD link great and now have everything including 6 giant scale gassers on my X20S.
I have an X20S and a X20 Pro AW (basically a fancier aluminum body, but mostly same internals and software). I use both for all my planes, from foamies to giant scale gas planes and ultra expensive turbine jets. The reason why I intially looked into FrSky was actually reliability, as I stopped trusting my more expensive Spektrum tx after some issues...
So my MacBook Pro M1 won’t recognize my ProAW. Correct cable, how do I get it to talk with Ethos suite as easily as yours is? Thanks for the video. It at least looks possible
Hi! I haven't run into issues with this other than an occasional instance where the laptop doesn't see the TX, but I have heard some reports of people having some similar problems. Some things people have found helpful: - Try a different cable (I'm sure you've already tried this). - If you get a "disk attached not readable" error, hit initialize, go to disk utility, and hit mount. - Alternatively, use a USB-C to USB-A cable and some sort of SUB-A to USB-C adapter or dock with USB-A ports. (for some reason, people have tried this and often works)...
Merci juan pour cette video car ces manipulations de mises à jour son complexes ainsi que l'installation de la langue Toi qui est pilote usine peu tu demander que Frsky installe le Wifi sur l'émetteur pour réaliser toutes les mises à jours automatiques sur le TX ou les RX tel que le propose Spektrum sur leur modèle haut de gamme je posséde le version Pro livré sans mode d'emploi !!! super radio mais manque de communication de cette firme qui nous laisse seul en france sans qui nous épauler Merci pour tes vidéos et bonne et heureuse année
Thank you for making this video on upgrading to 1.6.0. Please make a video showing setting up stabilized receivers under 1.6.0. Thanks.
Currently working on it. Should be up soon :-)
Juan great video explaining the upgrade glad I waited a bit...
Glad to hear it was helpful!
Thanks very much for the video. Very helpful. I would very much appreciate a video on setting up a stabilized Rx...such as a SR10 plus+. Thanks again and happy New year!
Thanks! I have a video covering that exact topic coming very soon!
Updated mine Yesterday...just my luck you did this video after...took me a lot longer 😂 Happy New Year🎉
Happy new year!
Great video! Thank you for sharing the new process. I’d love for you to do another video on the stabilization config on a receiver.
Great video... very thorough! Yes, please do a video on how to set the Stabilzed Receiver from that point on!
Currently working on it. Should be up soon :-)
Great video, wish I had seen it before I upgraded my X20S. Stabilized receiver setup will be helpful to many as the new process can cause some headaches if you miss a step or don't notice there is more information that requires you to scroll to access.
Great video and thank you, this will help a lot of people. Wish I had this video sooner, would have made the upgrade easier. I think it would be a great help for everyone to do a stabilized receiver setup as well as an SxR. Thank You!
Working on the stabilized rx video, should be up very soon :-)
Thanks. Very current topic and nice video.
thank you!
Great video!!
thank you!
excellent video, very clear, thank you very much
Thank you!
Thanks for the video Juan! I'm holding off for a bit on 1.6.0 and currently on 1.5.9, but I saved the video for when I make the switch. And yes, it would be great if you did one on setting up the stabilized Rx's. Thanks again!
Currently working on it. Should be up soon :-)
I am watching from Khodabande, Zanjan province, Iran...
Happy New Year 2025! Great video. My X20S is all updated and my new X20pro AW should be in hand soon.😂
Thanks! Hope you enjoy the new X20pro.
Thank you!
Great video ! Please do a video about the new stabilizer config
Coming soon!
Great video - thanks for all your efforts. I would love to see a video for updating the TD SR10 receivers - I have 5 to do once I update my transmitter. Will they have to be removed from the models to update them?
Thanks! I'm currently working on a "How to setup a Stabilized Receiver" video starting from scratch. For an existing model that was setup prior to 1.6, you will need to redo the calibrations and double check other parameters. If you're able to move the model to the required position during the calibration, you could keep the rx in the plane.
Watching since I think the update process is one of the only drawbacks to this transmitter. I have radiomaster with edgeTX same issue with firmware updates never as simple as Spektrum lol
Please do a video showing the stabilize configuration as I did everything on this video but can’t get my sr10 plus to work properly
Nice vid, Juan! Do you use the X20S for everything? I've been a longtime Futaba fan, but picked up an X20S a few months ago. I started swapping planes over recently, but hesitant on using it with my big gassers. I know people are using these radios on $20K+ turbines....still hard for me to get over the hump to trust it lol.
I came from a long run with Futaba as well. I started with FrSky on a few smaller planes and am only using non stabilized rx's currently, but found the TD link great and now have everything including 6 giant scale gassers on my X20S.
I have an X20S and a X20 Pro AW (basically a fancier aluminum body, but mostly same internals and software). I use both for all my planes, from foamies to giant scale gas planes and ultra expensive turbine jets. The reason why I intially looked into FrSky was actually reliability, as I stopped trusting my more expensive Spektrum tx after some issues...
So my MacBook Pro M1 won’t recognize my ProAW. Correct cable, how do I get it to talk with Ethos suite as easily as yours is? Thanks for the video. It at least looks possible
Hi! I haven't run into issues with this other than an occasional instance where the laptop doesn't see the TX, but I have heard some reports of people having some similar problems. Some things people have found helpful:
- Try a different cable (I'm sure you've already tried this).
- If you get a "disk attached not readable" error, hit initialize, go to disk utility, and hit mount.
- Alternatively, use a USB-C to USB-A cable and some sort of SUB-A to USB-C adapter or dock with USB-A ports. (for some reason, people have tried this and often works)...
@ thanks. I’ll give it a try a few different ways now.
Hi brother..what do you think about the 8-channel radio control T8FB Radio Link? Is this radio quality?
Merci juan pour cette video car ces manipulations de mises à jour son complexes ainsi que l'installation de la langue
Toi qui est pilote usine peu tu demander que Frsky installe le Wifi sur l'émetteur pour réaliser toutes les mises à jours automatiques sur le TX ou les RX tel que le propose Spektrum sur leur modèle haut de gamme
je posséde le version Pro livré sans mode d'emploi !!! super radio mais manque de communication de cette firme qui nous laisse seul en france sans qui nous épauler
Merci pour tes vidéos et bonne et heureuse année
Is it the same for the 18rs ? just got it . thx for the video ,
Hi! The process should be identical I believe
Do you use mode 2
Yes. Mode 2