A Garage MUST HAVE - Wall Mount Pressure Washer | Active 2.0 w/ CoxReel
HTML-код
- Опубликовано: 4 фев 2023
- If you appreciate a clean car - you will appreciate this setup! Stoked to finally have a wall mount pressure washer in the garage!
Entire Kit: clean-garage.com/active-2-0-p...
Cox Hose Reel Wall Mount: www.obsessedgarage.com/produc...
Hose Clamps: www.lowes.com/pd/HoldRite-3-4...
Budget Friendly Reel, gun & wand: clean-garage.com/mtm-complete...
25ft Garden Hose: www.amazon.com/YOTOO-25-Feet-...
Link to all products used on my channel (sorted by build)!
www.amazon.com/shop/ajlodato
The above link allows me to earn a small commission helping grow the channel. Thank you in advance! 
Авто/Мото
You did a great job with the video and with your component selections. Many times people miss the primary points of a video. I think your overall plan and execution are great for someone who wants a “better than bottom” level of equipment without being excessive or extravagant. Plus, your secure arrangement on the wall and location within the garage are exactly where I’m planning to place mine. Really great to see an effective video that hits the target.
I do my best with these videos, so the kind words are great to hear!
I second the clean garage. They were very helpful and easy to work with than some other place. They were patient and didn’t make me feel like I was bothering them.
Agreed - still live OG, but clean garage is awesome to work with too!
@@AJLoDato22 yeah I was a big fan of OG too until I saw some of the shady and hypocritical stuff going on.
The crappy garage floors they sell. Have fun keeping that shit clean. But they wouldn’t be able to sell polyaspartic the way they can sell plastic Lego floors.
@@Brian-tu7yn For coatings, Sherwin-Williams is the place to go. They make a ton of super specialty stuff, even for nuclear power plants. You just have to find an industrial store.
Third on Clean Garage.
While he has knowledge, Matt (OG guy) comes across as a dick. The video berating customers for being stupid for not realizing a QD shipped with two parts mated together sealed it for me.
"We get this same call constantly." You people are so stupid, etc. Wasting our time, disrupting our operations, etc.
I came up in a military where you look to own problems instead of blaming others. If that many customers were calling, I'd conclude that I was doing a bad job in providing directions. New units would be shipped with a bold fluorescent sticker on them.
Yet the OG way is to make a video belittling customers instead of taking a simple step to minimize disruption of operations.
Very nice. I was on the fence on the MTM or Cox reel. I'm going to go with the Cox, seems like it's worth the extra $. Thanks.
Hey loved your set up and explanations. Thanks for putting this together. Just an FYI, I could be wrong but it looked like you wrapped that Teflon tape the wrong way. On that fitting you want to wrap it clockwise so when you screw on the threaded piece it doesn’t go against the direction of the “tear”. The way you did it will cause the tape to ball up inside and it won’t seal properly over time. Just respectful constructive criticism. Cheers.
Woah I really appreciate you letting me know. I will actually go and check it out right now. The last thing I want is a leak or a clogged tip. Thank you!!
Get all my stuff for business at clean garage! I’m lucky enough to live near their retail store. Great guys over there!
Woah that’s cool to hear!
Nice video. I live 2 miles from the Clean Garage and they are THE BEST as far as customer service, product selection and product availability.
I always wondered, is it a physical store that you can go in to?
@@AJLoDato22 yes! They have a huge showroom with a ton of products on the shelf from rupes polishers down to microfibers. Basically one half of the building is a showroom and the rest is warehouse space. They offer local pickup on any item in stock same day if you live within 50 miles. I usually just put an online order in and within the hour I get the email it’s ready to pickup.
Nice setup. Very clean. I love how you made it work with your water heater. So did I with my setup. You should get the CR Spotless Systems deionizer and mount it below your setup. That’s the thing that helps prevent water spots when washing a car. I have that and I use pex piping to connect my pressure washer to it, but I use the giraffe tools all in one pressure washer.
I am definitely considering the deionizer and may make the leap here soon. Appreciate the support!
How long does your CR Spotless last until it needs to be 'serviced'. I am looking into this more now, but fear lots of m\aintenance.
I went with the Adam's spotless Deionizer system. It's really hard to say how long it lasts, because it depends on many factors, mainly water hardness and usage. You can greatly prolong the life of the resin by saving the resin for the rinse stage of your wash (use regular tap for the wash/pre-wash). I went with the Adams since it has bypass controls built-in. It's basically inline with the hose, just before the pressure washer. I leave it in the bypass setting, and only run water through the DI tank when I'm getting ready to rinse.
I didn't even know that was an option to bypass. That's really good to know because I didn't want to waste the tanks when i use it to wash things other than the cars. Thanks for the info!@@BalanBro2
The pressure washer hose is probably one of the best on the market, if not the best for washing vehicles
This far, it has been awesome!
I would first, screw a sheet of plywood on the wall, finding the studs and use 2 1/2 screws, then all your washing components over that
That way, you reinforce that wall/plywood when pulling the hose and have the set up wherever you want and not worry about where the wood studs are and may not be the location you want for all the components
First use primer and then paint the plywood the color you want to make it pop
But as it is works great!
There is absolutely zero benefit to adding/using a backer board UNLESS the location of the studs do not line up with where you want the shelf and reel installed. The entire purpose of using backer boards is to give you something solid to mount things to when you can't otherwise mount directly to the studs, most often when you're installing smaller bits and/or anything that can't accommodate 16"OC or 24"OC. The mounting holes for both the shelf and the hole reel mount are designed for mounting to standard spaced studs.
Nice setup, good for you . Sweet Toyota to.
Thank you!!
Pretty neat. I too am getting tired of dragging my gas one out. I love detailing pur cars also. May look into a similar setup. Have you saw the wall mount vacs?
I absolutely recommend this setup - it makes me not even hesitate washing the cars now. I see OG is doing some experimenting with the vac’s. It’s on the list as well!
That’s the one I’d really like. That vacuum with a hose reel and it would be amazing!
*FUNCTIONAL EXCELLENCE*
😎😎😎
Man I've watched this video several times and I feel the same way. Perfecting my car is my Hobbie and I'm sick of pulling out the pressure washer and hooking everything up so now its time to invest. My only issue is figuring out how to run water into my garage from a outside spigot and I can't find any videos for help.
I have seen people run a hose to just outside their garage door. Then put a quick connect on it and a quick connect on the pressure washer. Then each time they use it, they quick hookup and turn the water on outside. However you get it figured out, it is 100% worth it!
Nice upload
"Budget friendly" option isn't really budget, MTM is one of the most expensive brands. There's good reels around $100, good guns around $50, good hoses around $50, good foam cannons around $30. Can pretty much do an identical setup for $400, including pressure washer, garden hose and quick connects.
Yeah the Amazon basics real is only 38 bucks
ruclips.net/video/ZZgnx80r69I/видео.html
@@ja.935g67 That's an air hose reel, careful not to order that for a pressure washer, PSI rating is way too low.
Going amazon type crap your gonna have issues down the line. My gun, reel, whip line, quick connects, ettc.. are all mtm. High quality, step down from mosmatic but less headaches.
@@whitegoodman7465 All my equipment cost me a few hundred, all raving reviews on Amazon and have lasted me years. I drive a German sports car in one of the wealthiest towns in the world, I can figure out how to get quality products without being a brand whore.
Awesome Video!! Question….What diameter garden hose water source inlet should I use with the Active 2.0?? 5/8 in OR 3/4 in diameter?? OR doesn’t it matter?? Thank you…Sr Bob
I’m not sure what the recommendations are on hose diameter, but mine is a 5/8” with 3/4” hose connector. So far it has been great!
Hello! Awesome setup; I love how organized it ended up looking. So, it's been a year since you posted the video. Can you tell me how good the pressure washer actually is? Because I've seen people say that it doesn't last too long when it starts to lose power (PSI).
Overall thoughts - still AMAZING. No issues or loss of pressure with the Active 2.0. Within the past week I did have the elbow connection integral to the Cox reel go out (spewing water). Aside from that no issues with the pressure washer, reel, hose or wand.
Very clean setup. Is there a way to get the Active 2.0 and the Cox reel only? I already have the foam cannon and spray gun/wand.
Yup I believe both OG and Clean Garage sell those individually
AJ, I already have the OG mosmatic gun, 50ft hose, wand, and MTM 2.2 soap cannon using these with a cheap sun joe press washer.
It's fine, but... I'm looking to do what you did with the on wall solution.
So I'm thinking all I need is the shelf, reel, active 2.0 washer, and a jumper hose.
Question:
Do you have a video on how you did your
Above ceiling mounted storage system?
In regards to the shelf, I will make a full garage video when I get her all done! In the meantime, I can send you links and pictures if you message me on IG (aj_lodato).
I ordered my kit through Clean Garage. They can help you with the right fittings too in addition to your list. Got the Cox Reel mount from obsessed garage. Links in the description.
Instead of putting on the wall many have set their units in cabinets while running everything out the back
Awesome setup. Where did you buy the mount for your house reel? I'm having a hard time finf one for my pressure washer unit I just bought from clean garage
I bought the hose reel mount from obsessed garage!
Amazing setup! Does machine have to be attached to the stainless mount? Or does it now rattle and stay in place?
Mine stays in place, but a lot of people have seen it shake off. There isn’t really a good mounting place other than a zip tie all the way around it or Velcro strips on the bottom.
Never thought of getting water source from water heater ? Can anyone assure it’s safe to do so ? I would love to have split end attachment to add my pressure washer to wash cars and home. Instead of dragging hose all the way from back of my home !
Lovely setup
To clarify, this hose bib is from my main water line coming in the house not the water heater. The builder put a hose bib and shutoff valve for the house. Then T’s off to the water heater. Hope this helps!
You should have just gone for the AR630 pressure washer. Sure it's a little more expensive, but the active will need replacement in the future while the AR can be worked on. In the long run you will spend more with those disposable pressure washers.
Though I agree, it was out of my budget for what I was willing to spend at the moment. Got other garage mods in the pipeline.
I was on the fence and went Active as well. Will sell it ASAP if I decide I like the foam cannon thing. Other big issue is that AR630 requires a 20A outlet. Where the Active was designed from the ground up to work from 15A of power. While I can easily pull wire for the 20A GFCI, the Active is certainly more versatile.
The 2.0 addresses a ton of the previous issues. Time will tell, but this unit is MORE than most of us will EVER need.
@@RICARD01 No question. Now only if DA U could address their issues. 'Canes need to start recruiting criminals again! As Urban Mayer has proved, there is a direct correlation between # of arrests and good football.
@@ILruffian We made the FINAL FOUR. Good enough for me. Lol
Nice setup. congrats. do you have a link to those clamps you used?
Sure thing - I updated the description to include the link.
Have you had any problems with the pressure washer falling off the shelf? Mine did on the third wash. It basically vibrates around until it reaches the end of the shelf and goes over. I couldn't find a designed in way to secure it, so I ended up using a strap. It looks crappy but it works. Hate to loose a $350 washer by it falling off the shelf.
I haven’t had that issue, but a lot of people are concerned about it. I wish they made holes in the bottom so you could at least zip tie it to the shelf. I plan on using Velcro or figuring a way to strap it down too.
Aj, thinking of going with the black shelf from clean garage. Do their shelves accommodate 16" on center studs?
Yup the one I got was 16" OC, which was very helpful.
Did you bolt the pressure washer to the shelf? If not, does it try to move while running?
The hose clamps on the wall help it stay in place for me. I will likely do Velcro to hold it down as lots of folks have had issues.
Damn that thing has a high pitch. I hope the 2.3 active I just bought isn’t that loud 😕
It certainly isn’t quiet. Let me know how the 2.3 is, I think it’ll be a big upgrade over this.
I see a lot of people using 1/4" M22 hose for auto detailing, I see you have 3/8" X 100. Any upside or down side to 1/4" vs 3/8"? I already have 3/8" X 100" of hose on a reel for my gas pressure washer system. I'm looking to buy the Active 2.0 or VE56
First - I’d definitely recommend the Active 2.0. It’s a great unit. Honestly I didn’t look too deep into hose sizes as I was looking for budget options and needed to go with the whole bundle, and this is what they had. From some quick research it looks like 1/4” would help up the pressure, but for me the 3/8” is great with just enough pressure and awesome flow.
"Sure", he tells the wife..hahahaha
Clean setup bro.
😂😂 avoid price conversations at all costs!
Hello I ordered the same reel in black like yours from same vendor. By any chance did your reel have over spray almost like bumps inside where you connect the hose?
I don’t think mine had any overspray. It could be a manufacturer defect. Depending on where it’s at, it may be hidden by the hose.
Did you have any issues with your garden supply hose running up your wall? I know you said it was temporary, but this might be my only option for a wall mounted solution.
Nope no issues at all, and I still have this setup (it worked too well). No issues with condensation either with water/outside air temp differentials. The clamps ended up not working because the nail didn’t have enough bite into the wood stud.
What height did you set your reel and shelf at? Looking at doing the same setup but can’t figure out dimensions/height and yours looks perfect
Sure thing!
Center of Reel: 43”
Top of Shelf: 57.5”
It does look good. But remember to figure your own height into things. At 6'4", I tend to put stuff way higher than most people. It's going to cause problems when I sell my house. "Why is the shower head a foot higher than normal?"
did you use the giant lug screws that came with the cox reel to mount the mounting plate?
Yup, directly into the studs. Super stout.
What size jumper hose did you go with? 3 foot? I’m wondering if the 2 foot would work or if that’s cutting it to close.
I did a 3’ jumper (included with the kit). I wouldn’t go much shorter unless you make your setup more compact
Great setup but the stainless shelf has to amplify sound no?
It probably does a little bit compared to wood, but I like the clean look of it.
May I know the bigger connector that you u connect with 2.0 that machine is it water inlet from ur water tank?
I don’t understand your question - if you could re-phrase I will try to help.
I have it wall mounted too but my Active rolls/tilts a lot when in use. How did you keep it sitting still? To combat my fear of falling down, I have it sitting on the ground for now.
I haven’t had any issues with it moving too much. I did hear stories similar to yours, so I plan on doing small pieces of Velcro on each corner. Or if it gets bad, one large zip tie around the unit and through the shelf.
@@AJLoDato22 so in the end, installed a random steel bracket (0.5 in thick) to keep it from moving. It has been solid for the past month at holding it steady.
@@alvinlu7631 That is great to know - thank you!
Great video dude. Do experience any surging at all with this setup? I’m think about pulling the trigger on the active 2.0 with a 50 foot hose. There seems to be a few mixed reviews out there indicating surging.
Thank you! Knock on wood, the 2.0 has been problem free for me, and I have been using it 2-3 times per week for the past year. No surging issues, but it will quick turn on every minute or so when you’re off the trigger which I thought was it trying to keep pressure on the line.
The people who have surging issues are using non steel braided hoses like Uber flex. Get the mtm kobra jet and you will not have issues.
@@johnnelwhite In the end I went with a Kranzle. Best move I could do I think. I’m tired of years and years of dealing with pressure washers that very quickly become a pain. So far so good. Seems like a quality piece. If it remains reliable it will be well worth the cost.
@@dlj1285 nothing wrong with that. It will probably be the last pressure washer you will ever purchase.
@@johnnelwhite That’s the theory. I guess we’ll see what happens in practice. It sure does feel quality. I’m just looking for a consistent experience/performance/quality and not have to think about reliability. If this won’t do it then nothing will. That’s my thinking.
Are the shelf legs 16” apart? Also, if you mounted the reel higher would the handle hit them? Thanks in advance - looking at making a similar purchase.
Yup the legs are conveniently 16” apart. You can nearly install the stainless reel mount up against the shelf legs. The handle of the reel stays within the diameter of the spool which great.
That’s great info thanks!
Does the hose get stiff when in use? I'm looking for a power washer hose that stays pliable when in use. Thanks!
Nope it’s pretty easy to maneuver when water is going through it. Similar if not identical to when no water is going through it.
did you have to mount the 2.0 to the shelf so it didn't vibrate off???
Not yet, but plan to use Velcro
I already have the jumper hose for the pressure washer, but where did you get the other little jumper hose for the water connection?
If you’re talking about the 3’ water connection hose, that came with the bundle. But is also sold individually on Clean Garages website.
@@AJLoDato22 just to make sure we're on the same page - you're not talking about the high pressure jumper, right? I'm specifically referring to the thing you're attaching at 4:19 in the video. If so, could you drop the name / link to it? Thanks so much for your quick response!!
AJ, I have the same kit from CCG. One question, how do you prevent the Active 2.0 from tipping down from the weight of the hose and how do you prevent it from moving around when it kicks on?
I haven’t had any issues with it tipping down because the jumper hose is fixed. I am going to install a hose clamp to keep the jumper hose secure to the shelf. I do have the issue of the unit sliding around a bit. I was going to velcro it down (haven’t done it yet though).
@@AJLoDato22 Thanks for the response. I meant the garden hose and not the jumper hose. The weight of my garden hose actually tips the washer downward on the garden hose connection end.
@@ckp4394 Ohh shoot - no problems thus far. The hose clamps I used are into a stud though, so the hose is super stout and not pulling down on the unit.
Mine is on a metal cart and it almost flipped over from the weight of the two hoses so I used a zip tie in the front and in the back and it works absolutely perfect no movement whatsoever but not sure if you can do that on a wall mount
Aj, which items did you get from obsessed garage??
And what did you purchase your other items from??
Links in the description. Obsessed Garage and Clean Garage.
Better to get all your mosmatic stuff from kleen rite and everything else directly from MTM
AJ, did you buy everything from Clean garage except the mount for your reel?
Yup that is correct.
AJ, can you please provide dimensions on the reel mount plate? Width, high etc. That would be great 👍
What is the exact nozzle guard tip you have? I am setting up the exact same set up you have with the same active 2.0
It is a MTM Acqualine 4.5 Office / 40 Deg
@@AJLoDato22 awesome thx
Does the machine rattle off of the shelf?
Mine hasn’t moved at all since I installed it. But there are a lot of people that have had to strap or Velcro theirs down.
@AJ LoDato, Hello, would you like to review the new MJJC foam cannon S V3.0? Thanks.
Sure - I’d love to! Feel free to DM me on instagram aj_lodato.
@@AJLoDato22 Thanks. Will do.
My active 2.0 when engaged flips on its side from the torque.. Is there a way to strap this thing down or do you have that issue?
Woah mine doesn’t do that, thankfully. I would try maybe a large black zip tie all the way around it to the shelf.
@@AJLoDato22 that's what I ended up doing, just was curious if others had that issue. It almost fell from 6 feet off the ground, I caught it in time
4runner looks great what lift is on it?
It is a Daystar lift - I have a playlist of videos on the 4runner too!
Great setup. Can you share the dimensions from wall to the outer edge of the entire setup? I reckon I have about 14" of room before it protrudes into usable parking space in my garage.
The reel sits out the furthest at 14”. If you leave the wand on it (handle only) mine sits at 16.5” off the wall.
@@AJLoDato22 This is super valuable info that no one else has provided! Thank you!
@@AJLoDato22 Update! Thanks for your feedback, it was super helpful in creating my setup on my channel, not the same budget as yours but I feel it was a great way to demonstrate proof of concept for future upgrades.
@@houdavn Watched your video - nice work. Is the stainless steel hose going down for an outdoor hose hookup?
@@AJLoDato22 Thank you! Yes, I have a 6ft garden hose on the other side of the wall that connects to the hose inside from the pressure washer. Plan to add a water spigot inside the garage so I no longer have to do that.
What are the details on the pressure hose itself? Mine is too rigid - would love to know the brand of yours.
Mine is a KobraJet Veloci, 3/8”, 100’. It’s certainly not super flexible, but has been easy to handle around a car. Love it so far!
@@AJLoDato22 Thanks so much!
anyone know where I can buy this? It's sold out on the original website.
Shoot - you're right. They did have good customer service, and may be able to help you out.
At the time you posted, nowhere. Everyone, including Clean Garage, has since re-stocked when Active shipped a boatload of them to the US. I backordered with Clean Garage and got it three weeks earlier than promised. Highly recommended over the other johnson.
Hello, where did you get the 25 foot hose?
Hey there - I got the garden hose off Amazon.
What screws did you use for the wall shelf?
I used two inch lag bolts into studs. Worked great.
@@AJLoDato22 Spot on. 1/4" lag bolts about 2" long are they way to go. Pilot hole for those is 5/32". If he can't hit a stud on one side, 1/4" toggle bolts (Snaptoggle brand is excellent) are the way to go.
How are you securing the pressure washer to this shelf?
At the moment I don’t have anything securing it (no issues so far). Some people have mentioned hot glue, velcro or zip ties.
@@AJLoDato22google active 2.0 mounts. I just ordered a pair it's two brackets that the feet pop into that can be taped or velcroed to the shelf. I just got my 2.0 and I didn't want to put holes in to the shelf.
Did you bolt the pressure washer to the metal shelf?
I didn’t, mine just sits on it. But there’s a lot of discussion in forms on how to secure it, because a handful of folks have had theirs vibrate off.
@@AJLoDato22 That was my concern.
How do you like the hose, been going back and forth between the gray cause it looks better on my black cox reel, but Matt at OG says to buy the blue one
I was torn between the same decision. So far I have no regrets, and it has been amazing. No issues and I have been using it weekly for about a year.
Awesome thanks for the reply.
How has the pressure washer been holding up. I ordered the obsessed garage vacuum solution and order this now
The active 2.0 has been great for me - no issues at all. Some folks have issues with it tipping off the shelf, but fortunately I have not. The vacuum is next for me, too!@@kevinderenzis7193
What length hose did you go with? I am torn between a 75 or 100
hi, what is the 25 ft hose that you are using?Thanks.
I added the link in the description. Thus far, it has been great 👍🏼
@@AJLoDato22 thank you
I am currently using the Uberflex hose. I got it bc i saw few reviewers mentioning that it was an upgrade to the oem hose.
Now I will agree that it is an upgrade to my Sunjoe hose and doesn’t kink but the uberflex tangles too easily and really tedious to work when in constantly does that.
I see your using a garden hose? Do you recommend me cvs going to that one instead of my current uberflex hose ?
I use a garden hose from the hose bibb to the machine then a cobra jet hose for my pressure washer hose. I believe yours is a pressure washing hose, right? If so a swivel-optioned wand is the best for reducing kinks.
Just invest in Kranzle K1322TS with advanced or ultimate package for an everlasting pressure washer.
Don’t need to spend close to that much to get a quality unit and set up
Should of got Giraffe wall mount pressure washer, everything all-in-one with 100ft hose
I like those too, just didn’t know the longevity of the unit
Hard pass. In addition to AJ's concerns about longevity, it is only rated to push 1.2 GPM. That's the factory's claim. Who knows what reality is?
Except those giraffe pressure washers are absolutely terrible
@@ILruffianyou did a gpm test?
No, but the factory did. The spec sheet lists 1.2 GPM. I believe them. Pretty much anyone reputable says you need 2.0 GPM to run a foam cannon well.
So I've only used this pressure washer one time. ruclips.net/user/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP The one time I used it, it worked great. I recently had new siding installed but kept the old gutters and small areas surrounding my house that weren't replaced so they looked horrible and dirty because of the new siding. I needed to get it cleaned asap. When I used the pressure washer, man it just melted all the dirt and grime that was on those areas of my house. I used that krud kutter soap and it was over after that. Easy to assemble, feels durable, very simple to use. Also, I purchased a used one to save money and there was absolutely nothing wrong with it. I want to get more use out of it so I think I'll be washing the cars and update this comment as time goes on.
My main concern with the active is the flow rate won’t be enough.
Her: You stayed within the $500 budget, right? Him: sure I did. 👀
In times like this, I give the least amount of details 😅
You wash you car everyday?
No no no - every weekend! lol
You put the Teflon tape on the wrong way.😁
Had someone call it out early and I was able to fix it. Thanks!
$1200?!! For the active 2.0?? Good lord.. I’ve priced out clean garage for about the same setup At about half that.
Check the link in the description - I bought from clean garage. I also spec’d this out not as a kit and it came out to a little more. You can certainly get parts that function the same for much less.
nice setup
i got the money for it but it's not worth 1200$ maybe 6 700 tops. when your gun and hose cost more than the pressure washer no thanks. 😅 there's other options that cut the cost in half without sacrificing quality. but to each their own. do what you like. im a mobile detailer and have had expensive units and tools and washers they all break. Honda, AR's, Simpson, Ryobi, Kranzle, Greenworks Morthstar., Active. in the end they all wear and fail and need replacing. this is a business decision. purchase what gets the job done for the cheapest price and then replace it when it fails. it's a business expense. so no need for the top of the line products for work.... now if it's your home , for personal use.. complete opposite, get whatever you feel like.. the best thing you can afford. i have a Electric NorthStar commercial washer with serviceable pump and total stop. 1400$
1100 to 2600 psi and 1.4 to 3.0 gpm. all for the same price as a Kranzle 1122 it blows all other electric washers out of the water not wall mounted its on wherls but never moves just connected to a retractable 100 ft pressure pro hose. gun is a swivel gun from Suttner
Agreed, to each their own. Sounds like you got a nice setup too! I went expensive on the accessories knowing I’ll keep them long. I went cheaper on the unit knowing I’ll replace it as it fails over time.
Music was a bad choice enduring else was greatly presented
Dude you put your Teflon tape on the wrong direction!
Someone told me right after posting the video and I was able to get it fixed. Appreciate you looking out for me!
$1,200 I feel like you got ripped off 😮
To each their own, right 🤷♂️
and do you think tha's expensive top notch !!!! hahahahahahahah😂😂😂😂 emericans !!!!
Elaborate…
1,200.00??? Damn. This same machine is less than 200.00 right now on Amazon. And the cat one made by active. Don’t see what cost you 1200??
The cost is really in the accessories and the quality of them. You can certainly do a similar setup cheaper!
Pressure washing a car’s paint could be very destructive don’t do it unless you know exactly what you are walking into
Noted
The Active 2.0 and others (Kranzle, AR Blue Clean) are made specifically for car detailing. They have good gallons per minute flow but not excessive PSI pressure. But, you are correct - don’t use too small of a nozzle which will raise the PSI - it’s best to keep it around 1000 PSI or lower.
Not worth the money.
To each their own, right? 🤷♂️
Is awfully lound
Not so much in person. It is average with other electric pressure washers.
Detailing a car, any car weekly, is the most narcissistic, vain thing ever.
Signed,
Owner of 15+ new vehicles at 56 years old that doesn't give a phuggk about when I wash a car. I get to it when I get to it.
Fail 👎🏼
lol 😂
Did you tap into your water supply by your hot water heater for the hose connection? If so, how did you do it?
Nope, this is actually the main water line into my house and the builder came out of the wall to put whole house shutoff valve on it. They also put the hose bib on it, too. So it is a cold water connection.
@@AJLoDato22 ah gotcha, thank you.