MHW-3Bomber Blade R3 Grinder Review: Is the Sifting Screen Worth It?
HTML-код
- Опубликовано: 8 июл 2024
- In this video, I'm sharing my thoughts on the new MHW-3Bomber Blade R3 hand grinder. Its unique built-in sifting screen caught my eye, but does it make coffee taste better? I’ll take you through the unboxing, the grind settings, and performance tests for both pour-over and espresso. I'll also share some user-friendliness issues I encountered.
Note: I made a mistake, the grinder can be disassembled without using a screwdriver.
Check out this short video: • MHW 3Bomber Blade R3 G...
Timestamps:
00:00 - Intro
00:59 - Unboxing
02:24 - Grind Setting
04:29 - Pour Over Test
06:45 - Espresso Test
09:01 - About Sifting Coffee
10:18 - Drawbacks
11:27 - Wrapping up
Despite a few drawbacks, the R3 has some impressive features for an entry-level hand grinder. If you’re in the market for an affordable hand grinder with some neat features, the R3 is definitely worth a look.
If you enjoyed this review, please give it a thumbs up 👍, and don't forget to subscribe for more coffee gear reviews and brewing tips. Leave a comment below if you have any questions or if there's another product you'd like me to review. Thanks for watching, and happy brewing! ☕️
#coffeegrinder #mhw3bomber #blader3 #coffee 
Хобби
I have it and I am enjoying it everyday.
I liked the review for the r3 grinder
I had it two weeks ago and I like it.
outer cover is excellent with me, and I didn't have any problems with it. I think the cup It causes mess
Thank you for the video
Thanks for your recommendation, and I'm glad you like the grinder. Sifting can be messy, but it's a lot of fun trying out the product.
First of all, I want to thank you for the wonderful video, but I have a question. I would like to know the difference between this grinder and the Time More x lite grinder for daily use in preparing espresso. Thank you.
How would you compare it to a Kingrinder K4?
If you want to get the hand out faster, grab the grinder from the top of the numbers.
Hey, how would you compare in to a grinder like 1zpresso X-Pro for espresso? Flavor profile and general usage? Thanks
I think the X-Pro is easier to use and calibrate. For espresso, the X-Pro offers 12.5 microns per step, giving you even more room for minor adjustments. However, it does take longer to grind. The R3 seems to produce more fine dust than the X-Pro in the espresso range, I prefer the shot from the X-Pro.
You don't need a screwdriver, you just need to move the axis at about 50 clicks and with your fingers push the bottom part, with that you loosen the top screw
Thanks, I just figured it out and removed it. You are right, the base is actually connected to the central shaft, so I don't need a screwdriver. They didn't mention disassembly in the manual. I also removed the outer ring, but it's very difficult to put back on. Now I'm learning how to recalibrate it back to zero.
@@brewcoffeehome It is very simple, you just have to do the same as if you were going to disassemble it, but instead of removing the nut you just tighten it, while trying to reach zero, in a few words, keep tightening until you reach the number you want in the video that I mentioned in the previous comment about the disassembled grinder, explain how to calibrate to zero, I think that with this in mind I could qualify this grinder as the best in its segment, which competes with timemore s3, c3 esp pro, k6 k4 and j espresso but you what's your opinion about it
@@Caneloelperro Thanks for the input! Yes, the R3 is a good all-around grinder for both filter coffee and espresso. It's also quite affordable. The Timemore S3 can't grind fine enough for espresso in my test. The C3 ESP is better in grind consistency at mid-range settings but offers fewer grind settings and has larger step (23 microns) for dialing in. 1Zpresso's grinders, like the J or K series, are better than the R3 but also more expensive, so it's not a fair comparison. I haven't tried the K4 and K6 yet.
@@brewcoffeehome I did a lot of research on the topic on reddit. And my conclusions when buying my first grinder was the R3, maybe one day you can I would like to see that comparison with the k6 since they compare it with the Fellow ode 2 in terms of pouring in terms of pouring personally, although I only get a week with the. I loved the R3 and I am considering the Sniper from the same brand for the future
I'm very interested in the burr set on this grinder. It seems there are two other grinders using the same burrset, the Yukaofes U Pro S, and the Veisimple grinder. The collar burr looks similar to something like a k ultra. But the cone burr is something completely unique. Very aggressive unflattened prebreakers with extremely short and shallow cut finishing teeth that have significant flat surfaces between each tooth. Usually the burr design is either an aggressive prebreaker with aggressive finishing teeth (1zpresso J series, kinu, timemore), or a slower feeding prebreaker with smaller and less aggressive finishing teeth (zp6, ssp mp). I don't really know what to make of this grinder.
Thanks for your insights. TBH I don’t have an in-depth knowledge of burr design myself, but it seems this grinder is designed to be an all-rounder, balancing both espresso and filter coffee. It has a built-in sifter for pour-over and offers 16 microns for precise adjustments for espresso.
thanks for the review. I have learned how my grind setting should be. I would set 1 full rot for pour over and I realized that with the video it was wrong. Nonetheless, taste was not bad at all, lol. The static is temporary but I think the only problem is (maybe it exist for only my grinder) squealing sound. My 5 grinds was not noisy, now it is screaming like a hell.
There are three bearings inside. Maybe something went wrong or they're not lubricated enough?
@furkansariaydin Benim R3 topuzundan ses yapıyor
@@mehmetak2493 evet benimki de ordanmış aşağı bastırınca düzeliyor
@@brewcoffeehome I figured it out that the noise comes from the knob. If I press a bit down, It goes away.
one small drop of Victorinox knife oil inside the hole of the wooden handle completely removes the creaking )
Thx for the excellent review. Looking at the burr geometry online, it looks like this is more geared toward all purpose without ever going to excel in neither espresso or filter. Would you agree?
Do you know on which click the burr start to rub against each other?
Thanks for the comment. I don't know much about burr geometry, could you please elaborate a bit so I can learn more? Based on my brewing experience, yes, it's an all-purpose grinder that works well for both filter and espresso. The point at which the burrs start to rub against each other depends on how you calibrate them.
@@brewcoffeehome its a 7 spoke burr that looks like a hybrid between MK3 or kingrinder 6 burr n Timemore DPMX 6 spoke burr. Unlike the MK3 it doesn't have the teeth that goes all the way to the top end of the burr.
W/o analyzing it too much, just from experience alone, the MK3 excels in producing high clarity n complexity yet lacking richness and body. The DPMX on the other hand, I like it a tiny bit more because it's more balance and 'less thinking' and yet still bright for filter n espresso. The timemore changed it to S2C660 which for me sacrifice too much brightness for even more structure.
But again, this is anecdotal and purely conjectural on my part.
Say, if 0 is when the burr is locked, at which click the burr stops rubbing against each other? I mean, the alignment can't be perfect in a conical grinder.
@@wenderis Thanks for the input. I locked it to the finest setting, and the burrs stopped rubbing against each other (no noise, spinning freely) at 16 clicks.
In my R3 the millstone turns in both directions absolutely silently from the 12th click. Surprisingly, clockwise (as I do grinding) the millstones are silent starting from the 9th click, but in the opposite direction there is still a slight noise. And, I can turn the rod relatively easily without a handle just with my fingers from the 3rd click
I do not know how true this is, but I read that the millstones completely adjust to each other after a kilogram of ground coffee - I have ground only 600 grams so far)
How would you compare it to the timemore c3esp?
I like this R3, faster grinding, smaller step, external adjustment, lower price and it feels more solid.
Can you get rid of chaff by using one of those sifters?
No, I think the sifter is designed for removing the fines, not the large particles.
I also think that fines are necessary for espresso
Not full of fines, but some must exist
On RUclips there is a video where they disarmed it, just look for the disarmed mhw 3bomber
HELLO, I HAVE THIS R3 MILL AND I HAVE TO CLARIFY THAT TO UNSCREW A SPECIAL TOOL IS NOT NECESSARY, IT IS SIMPLY UNSCREWED FROM THE TOP, I THINK THAT FOR THE PRICE 69 US IT IS AN EXCELLENT PRODUCT, OF GREAT QUALITY AND OFFERS A LOT OF MILL FEATURES MORE EXPENSIVE
Thanks for the comment. Yes, you are right. I noticed that later and made a disassembly short video, updated the description.
How would you compare it to a Kingrinder K4?
I don't have the K4 so I can't compare them, I may buy a K6 for testing soon. :)