new subscriber here from Australia of Greek born parents im 51 & lost my father when i was barely turning 20 only met 1 of my grand fathers but hearing you talk of your grand father and your memories shared & learnt and the tools initial owners past on was beautifully brilliant... thanks for your time making this video love watching shop tours i got a small panel paint shop always looking for ideas & inspiration as my shop is about 300sqm add the booth office lunch/kitchen room & mix room space gets taken up quickly.. thanks again for your time & efforts great set up you should be proud
Thank you! I wouldn't be able to do this if it wasn't for the great men that came before me! All of these tools have a great story, and I'm glad I got to share some of them.
I am sure Many watching this, would ❤to have shop like this. I especially liked the Miller Welding machine. Perfect for any shop trying to decide what machine they should buy. Great to see a Genuine Made in England Record Vice sitting on your bench. Most now are cast in China with the Made in England, still cast on the side ?? A Tidy Shop is Always a Happy space to work in. Thanks for the tour. Peter 👍
Thanks Darrell! I wouldn't be doing this if it wasn't for your help and inspiration over the years! Thanks for checking out the video! Miss you guys!!!!
You got a sub. Cause your Canadian. Like the look of your shop. Plus it’s well organized. Sure your grandfather would like that you think of him for inspiration.
Thank you, we are very proud of our shop space,and it has only gotten better over the last 6 months. Looking forward to showing more in the near future
Dude!!!! That’s man is an absolute dream of a shop, the lay out is mint and you utilized every square inch just right eh, the cleanliness and organization and set up is all on point for sure. Nice work in this one and congratulations on this RUclips journey I’ll be here following along
I would love to get into 3-D printing I would also love for you guys to make a video on 3-D printing I am old-school and new technology is hard for me but my passion is cars as well as yours. If I could see 3-D printing utilized in the automotive world especially hot rod and customization it would be amazing
3D printed bead roller dies? Can the filament / plastic stand up to the pressures? Or do you use it to cast in sand? Super curious to see that process!
Thanks so much! Its totally different now, we may have to do another tour video this year! The epoxy floors hold up ok. I'd prefer just bare concrete, but these floors were already installed when we got the shop. I've definately melted a couple little holes in the epoxy, but with all the little color chips you barely notice. As an added note, if you drop anything small on the floor, it disappears into the color chips haha
The pallet rack workbench. Do you see any downside to that set up? Lighting looks great there. When you paint all the pallet racking....is that a fast spray or do you put a lot of effort into sanding down etc? tHanks for the great video
Honestly I love using the racking for benches! It's super strong, and a great way to help keep the shop organized. And as far as painting goes, all the racking is how I bought it. No cleanup or paint at all. Just lucked out finding a 24" deep rack in good shape!
Very nice and well organized shop. I was doing a search for shop tours and found your video. Now I have to subscribe to see how your cars turn out. Thanks for sharing your shop with us.
new subscriber here from Australia of Greek born parents im 51 & lost my father when i was barely turning 20 only met 1 of my grand fathers but hearing you talk of your grand father and your memories shared & learnt and the tools initial owners past on was beautifully brilliant...
thanks for your time making this video love watching shop tours i got a small panel paint shop always looking for ideas & inspiration as my shop is about 300sqm add the booth office lunch/kitchen room & mix room space gets taken up quickly..
thanks again for your time & efforts great set up you should be proud
Fantastic video, I love how respectful you are to the tools passed on from those not with us anymore.
Thank you! I wouldn't be able to do this if it wasn't for the great men that came before me! All of these tools have a great story, and I'm glad I got to share some of them.
Came hereafter seeing you on Mikes video!🇦🇺👍
You are an outstanding young man! A young person with enormous talent and has respect and admiration for your elders. Much praise to you!🙏☮️🇺🇸
Thank you so much for the kind words! And also for checking out our channel!
Extremely nice layout to the shop. Can clearly tell you take care and appreciate it. Can't wait to see more content from you.
Thank you! I love the shop, it has always been my dream to have a space like this!! Thank you for the comment and supporting the channel!
Very nice shop, I love the respect you have for your things. I hope nothing but the best!
Nice work, shop and outlook mate.
Thanks for sharing.
Thank you for taking the time to see what I'm up to! Glad you enjoyed it!
Very cool video. The deeper you went into the shop and shared stories the more the video captured my full attention.
Thanks for watching! Really appreciate it!
Keep the videos coming! Your shop is amazing
Thanks Josh! More content coming soon! Just in a bit of a time crunch at the moment!
Fabulous tour Preston! I love your respect for the tools and those who have used them before you.
Thank you so much for watching Jean! I wouldn't be doing this without those tools so they deserve all the respect I can give them!
I am sure Many watching this, would ❤to have shop like this.
I especially liked the Miller Welding machine.
Perfect for any shop trying to decide what machine they should buy.
Great to see a Genuine Made in England Record Vice sitting on your bench.
Most now are cast in China with the Made in England, still cast on the side ??
A Tidy Shop is Always a Happy space to work in.
Thanks for the tour.
Peter 👍
Thank you so much for taking the time to check out the shop. Both the Miller welder and the Record vice have been great tools for me!
Well done Preston you have come a long way glad to see Buds tools in your shop. Keep up the good work.
Thanks Darrell! I wouldn't be doing this if it wasn't for your help and inspiration over the years! Thanks for checking out the video! Miss you guys!!!!
Great tour Preston, always enjoy the glimpses into your business. Keep on doing what you do. You are a skilled craftsman. Cheers
Thank you so much Wayne! You've always been a huge supporter of what we do!!!
You got a sub. Cause your Canadian. Like the look of your shop. Plus it’s well organized. Sure your grandfather would like that you think of him for inspiration.
Very nice shop. You give me very good ideas to start my own one. Thank you.
Thank you, we are very proud of our shop space,and it has only gotten better over the last 6 months. Looking forward to showing more in the near future
Nice work my friend! Looking forward to getting back to the road this spring! Better get my car back together.. haha!
Thank you Dan! Really appreciate all your support and encouragement on our RUclips journey!
Great shop and video !!!!!!
Thank you so much! Will be getting back to videos here shortly
Very nice shop set up!
Sweet shop! Dig the Lincoln.
Very nice shop,love from India.
Thank you for checking it out! I love how with RUclips you can see shops all over the world!!!
Dude!!!! That’s man is an absolute dream of a shop, the lay out is mint and you utilized every square inch just right eh, the cleanliness and organization and set up is all on point for sure.
Nice work in this one and congratulations on this RUclips journey I’ll be here following along
Thanks Colin!!! Looking forward to seeing your beautiful Impala on that hoist!
@@lakeviewfab7796 I can’t wait either man I’m itching to get it up that way to be under your knife
What an amazing space!
Thanks Ali!
Very nice bro!!!!
Thanks for checking it out!
awsome, can't wait for the furure videos :)
Thank you! Appreciate you checking out what we do!
Very nice shop. 👍👍
Thank you for checking it out!
awesome shop
Awesome shop and video , thank you for sharing. Can you provide overall shop dimensions?
Woooow le professionel bravo c est tellement bien ranger
I would love to get into 3-D printing I would also love for you guys to make a video on 3-D printing I am old-school and new technology is hard for me but my passion is cars as well as yours. If I could see 3-D printing utilized in the automotive world especially hot rod and customization it would be amazing
A organização, limpeza e diversidade de ferramentas facilita o trabalho. Nos serve de inspiração.
3D printed bead roller dies? Can the filament / plastic stand up to the pressures? Or do you use it to cast in sand? Super curious to see that process!
cool - 👍👍😎👍👍 - I've sub'd and look forward to catching up as well as seeing new content.
Thanks for watching!
Such an awesome shop.
How do the epoxy floors hold up to the welding and plasma ?
Thanks so much! Its totally different now, we may have to do another tour video this year! The epoxy floors hold up ok. I'd prefer just bare concrete, but these floors were already installed when we got the shop. I've definately melted a couple little holes in the epoxy, but with all the little color chips you barely notice. As an added note, if you drop anything small on the floor, it disappears into the color chips haha
The pallet rack workbench. Do you see any downside to that set up? Lighting looks great there. When you paint all the pallet racking....is that a fast spray or do you put a lot of effort into sanding down etc?
tHanks for the great video
Honestly I love using the racking for benches! It's super strong, and a great way to help keep the shop organized.
And as far as painting goes, all the racking is how I bought it. No cleanup or paint at all. Just lucked out finding a 24" deep rack in good shape!
Justed subscribed UK follower and street rod builder
Thanks for following along!
Great video as always. You have nice and well laid out shop. If you don't mind me asking, what size shop and wall height is it?
Thank you so much! The shop is 50ft deep at the main bay, 42 ft at the shorter bay. 30ft wide with 15ft ceilings.
Very nice and well organized shop. I was doing a search for shop tours and found your video. Now I have to subscribe to see how your cars turn out. Thanks for sharing your shop with us.
@@larryh7760 thank you for checking it out! Appreciate you taking the time to comment and subscribe!
wow! Shop goals. What is the size of the shop?
Thanks so much! Shop is 30x50 approximately!
What dewalt grinder have you got there?
What’s the model miller all in one setup?
Did I miss it? What size is your building? I see the offset doors...
Shop is roughly 30x50. With one door offset in about 8ft and a 10x10 office overhanging the corner and a 5x3 bathroom in the back corner
What brand are those nut and bolt bins? Did they come orange?
I just bought them from our local hardware supplier, no brand on them anywhere and yes, they did come in Orange
Just saw u on rust Bros
Thanks for coming to check out our channel!
I was all in until you started showing off Chevys. Haha, just joking but Ford is better. 😆 Nice shop brother.. keep the videos coming.
Chevy's live outside, it's all Ford's inside!! Model A and Lincoln haha
Can you share exact model of mid scissor lift? Thanks
It is a Peak MR-06 from Babco Canada!
That’s why u don’t use electric power tools air all day long
Trucks should go up, not down. 🤔
Don't worry! We have that covered as well with our 2018 4x4 GMC elevation!
4wd trucks go up, 2wd trucks go down!
👍👍👍😎😎😎
Thanks so much! New videos coming soon
@@lakeviewfab7796 👍
Well I’m not selling you any of my equipment. I’d be dead by the next morning
Hahah love it. I don't have room for any more anyways!