Why doesn't my Lionel whistle tender make any sound?
HTML-код
- Опубликовано: 10 сен 2024
- Maybe you just got a Lionel postwar or prewar locomotive, and you put in on the track and the whistle tender doesn't do anything. It looks like its in good shape so you better look under the shell. This video goes into detail about the steps to checking out a whistle tender to identify some possible issues that may be causing yours not to work
I truly appreciate everyone's comments and support in this community we all built. A few more ways to help are:
Get some MERCH designed for you railfans! At WarrenMuzakArt.redbubble.com
or
Want to grab a coffee? www.buymeacoff...
or
Postwar Guy page at patreon.com/PostWarGuy
Excellent video with good explanation. It’s also reassuring to see someone else leave out a part (brushes) like I’ve done so many times.
Excellent video with good explanation. It’s also reassuring to see another person leave out a part ( brushes) because I’ve done that before.
Thanks for watching! More times than I care to admit after a complete tear down and reassemble, the reason my locos wont work is because I forgot the brushes (LOL), OR an original solder joint broke.
One thing to watch for on these whistles with the motor. If the motor is spinning the wrong way, you will also get mostly an air sound and not a whistle sound.
Great videos. Im new to these trains and learned alot from you! Thanks!
Thanks for watching! Its always great to hear from folks new to the hobby because thats truly who my videos are geared towards. The point being these locos are easy to work on with simple tools and can be enjoyed for many more years, or even generations!
Master.-
A little over kill with a crescent wrench…no? A nut driver should be more than adequate to remove a #6, #8 or #10 nut……..LOL. I had one where the impeller moved on the armature shaft and rubbed. Simple reposition impeller and all is working as it should again. Brushes look short (worn)? Good presentation.
Hey Gene thanks for watching. My selection of tools is limited so I use what I have. Its important to me to include all levels of Lionel and model train fans, some all the tools and specialized hobby tools, those that don't should not feel excluded.
I hope get younger people involved and included in the hobby by showing how to make do with what you got. Tinker and have fun. Keep the Lionels OUT of the garbage and on the track, the best way you can.
If I had more resources I might expand my tool set, for now, what I can afford to spend, I'll spend on locomotives, rolling stock and track!
Thanks again for your support and comments. Have a great week!
W
I would replace the old wires that connect to the truck rollers too, the isolation is already cracking and is only matter of time before they start losing more of it and make a short circuit.
What gauge wire should you use ?
@@banjomanmi76-hu8wf Any 20 or 22 AWG stranded wire will do. It is not critical as it is just a short piece of wire and there are no high currents involved. More importantly, it should be flexible enough to allow the trucks to move freely.
Lighter fluid works well to clean the carbon and it doesn't leave a residue.
P.S. it's an impeller 👍
I would hope lighter fluid didn't leave a residue. One spark and its flame train.
Impeller, yes, thank you.👍
Great video. Loved it.
I am saprized you did use a small socket to take those nuts lose.
When I run my o gauge layout I have all the sound effects turned off all the smoke turned off it gets to be too much after a while.
Is it your favorite because it whistles? 😊
I really like the shape and size of it. It looks great with a lot of locos.
I think some folks referred to this as a "coffin" type. It doesn't really look like a coffin to me.
Do you find the fibres that the brite pads leave behibd an issue?
Hey Ken, thanks for watching! I have never had an issue with them. If I see any residue from the pad on a part, I just blow on it, and that clears it.
@@warrenmuzakpostwarguy4331 Thanks for the reply.
I had one of these tenders and it would not work. I went on the OMG blog and someone suggested reversing the power to the track. Since it is AC I couldn't understand how that would work, but I tried it. And guess what...it worked.
The whistle actually works with DC: Lionel transformers have an internal diode (selenium or copper-oxide type on older units) that gets connected into the circuit when the whistle button is pressed (or the whistle handle turned); the DC activates the relay in the tender which in turn starts the motor. Both the tender and locomotive motors are of universal type, so they work equally on AC or DC. But sometimes the tender relay becomes magnetized and thus more sensitive to certain polarity, and that's why reversing wires help. It may happen also that the diode inside the transformer fails, in which case it should be replaced by a modern silicon type.
@@Crosley-1520 thanks.
its funny you keep referrring to the train car as 'she'
Things that we LOVE but cause us lots of problems and aggravation are naturally referred to as SHE
Falta sellar las raniritas del motor para que no se escape el aire y salga con mayor fuerza hacia los silvatos porque se pierde fuerza