If you take a burnt out lamp (where the filament is broken) and connect the high voltage to the live and neutral connections of the lamp the plasma will stay between the 2 pieces of metal inside the lamp.
Excellent. Thank you! Would love to see this idea expanded. I bought one of these kits a long time ago and hadn't decided what to do with it. Now I'm thinking of some kind of plasma ball thing. How do the commercial plasma ball/lamps work without a conductor on the outer glass sphere?
great channel..i have made some of your circuits, they worked very well. I made your Tesla Coils successfully. I would like to know if you can make a slayer exciter using the Tip-35c trans. If possible using 2 or 3 of in parallel. I am having problems getting one of these to work correctly...Thanks
So, all light bulb is a plasma ball? If it is empty, will it work? So, there are four things in primary, + and -, glass, and gases, and metal. You can touch it? If not, why not?
What effect will you get if you light up the filament with let say 60 volts and put the high voltage on one of the wires and the other (insulated or with the filament with isolation transformer) on top like in the video.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
If you take a burnt out lamp (where the filament is broken) and connect the high voltage to the live and neutral connections of the lamp the plasma will stay between the 2 pieces of metal inside the lamp.
I wonder how the commercially made plasma globes work? They don't have a washer or wire on top. Is your body (ground) the other electrode?
Very nice plasma demonstration :)
Thanks
Can we use a bridge rectifier for ac supply
Great Job man 👍
Thanks you
Excellent. Thank you! Would love to see this idea expanded. I bought one of these kits a long time ago and hadn't decided what to do with it. Now I'm thinking of some kind of plasma ball thing. How do the commercial plasma ball/lamps work without a conductor on the outer glass sphere?
They couple to the air through capacitance mate
You can do the same with a lamp at higher frequency
.
You actual only need the base wire since the capacity of the glass is enough to make arcs.
Great video as always!... Thank you & please keep them coming!
There will be more ✌
Ludic, thanks for a great video!
Glad you like it
Excellent video!!👍🏼👍🏼
Can I use flyback transformer from an old TV which uses high voltage DC ?? Thx
If we pv near to florence lamp what will happen sir...
Thanks 👍👍
great channel..i have made some of your circuits, they worked very well. I made your Tesla Coils successfully. I would like to know if you can make a slayer exciter using the Tip-35c trans. If possible using 2 or 3 of in parallel. I am having problems getting one of these to work correctly...Thanks
Great idea I think it can work
thanks...@@ludicscience
Provide the link for your high voltage power supply please?
ruclips.net/video/qEbMRfRHEkI/видео.html
Try this www.ebay.com/sch/i.html?_nkw=15kv+power+supply&_sop=15
will this work with a mosqiuoto bat circuit?
No
So, all light bulb is a plasma ball? If it is empty, will it work? So, there are four things in primary, + and -, glass, and gases, and metal. You can touch it? If not, why not?
Sir is it fuse bulb or not please tel me?
OMG FINALLY BEST CHANNEL THNX
😊
What happens to you if you touch the lightning with your finger?
Nasty shock you will get
How much compared to 230 volt house installation? which is most dangerous
230 v from mains
It is a high frequncy high voltage low power source. Most likely it will burn your skin, because of the skin effect. 230v main voltage is more lethal.
How does high voltage generate high frequency sounds?
Most interesting. Thank you!
✌
is it safe to touch?
thank you very much brother
Can I ask where to buy in china Solid state relays? I cant find it. I need 230 voltage on the coil and I need it to be with spade terminals
have you tried aliexpress?
@@ludicscience yes I have, mayby I didnt find anything because I dont use the correct search keys?
does it work with tv flyback ?
plasma ball is cool!
It is!
If you heat up fillament you will get a plasma rectifier.
Mmmm have to think about it
@@ludicscience this how the vaccum tubes works.
I used 60W bulb, the plasma arc is tiny...... should I use 25 W bulb instead? Thx
Are you using the same hv power supply?
Ludic Science I used larger flyback transformer with output of 15kV....
Nice video, I have a question, why is there a high pitch noise made from the plasma ball?
The arc makes the glass vibrate, the transformer also emits a similar sound
Can you tuch the metal washer
Yes
saudações do Brasil a todos. um belo efeito visual. e é bem simples. muito bom. parabéns. sucesso.
Muchas gracias obrogado
@@ludicscience . valeu. sucesso.
What effect will you get if you light up the filament with let say 60 volts and put the high voltage on one of the wires and the other (insulated or with the filament with isolation transformer) on top like in the video.
Not sure will have.to experiment nice question
One question now isit a plasma lamp or plasma ball🤔🤔🤔????
It is both
@@ludicscience 😂
@@ludicscience 😂
I saw this earlier on ur another channel
A few days ago
Very nice.
Thanks
looks a lot like an edison tube
I am goint to buy these little hv suckers. they seem to handy.
Yep for the price i bought a dozen
Very interesting
✌
thank you, pretty cool. I love it. cu Toni
Thanks Toni have a nice day
Plasma, that's cool :)
Yes 😎
Awesome
Thanks 👍
Cool
My eeeaaaaarrrssss 🙉
😂
Palsma ball is safe to touch this is not
✌
Nice
👍
84