Thanks but I was lucky and had no issues with mine, one of the few. I made this video as a joke if you watch till the end. Sorry you had to cancel yours.
Look great!!! Thanks for posting this videoI hope my De Lorean doesn’t have weathered tires or broken axles. 😂 I can’t wait to get my De Lorean and 89 Batman and Batmobile!
@@ghostbusterspluscollector9624 amazing!!! I get mine in a couple months and would love to do some screen accurate mods to so I’ll keep an eye out for your vids dude ☺️
@@ghostbusterspluscollector9624 what wires did you buy? I got the zip ties/extra plates from mike lane... but I figured the colored wires on this vehicle comes with are good enough. But now you got me thinkin hahaha
Since this Mark II is elevated on the stand, I would guess that they chose to use a lot more plastic than on the first version just to keep the weight down.
So nice...I might have to pull the trigger on this?! How high or how tall is this with the stand? I may need buy a display case too to cover this from dust
That’s true the quality seems low Danobys was broken on arrival I’m a little concerned and the other problem is sideshow told me I wouldn’t get mine until they receive stock and the reason as to why is due to a miscount and shortage
Danoby broke his by not extending the wheels fully. Got mine yesterday and it's fine. Didn't have problems with the wire clips or anything like this guy said. No issues with the wheel conversion
@@8bitflea obviously you weren't that careful if they broke lol. But yeah they're designed in a way where I could see people breaking them. Having been building PCs since I was a youngster I've mastered the art of "restrained forcefulness." Sucks about the mirror though. You should almost certainly be able to get a replacement if you act quickly enough. Also KINDA sucks with those clips because there's no way those things are being removed without breaking. They're essentially permanent fixtures. So hope nobody gets one of these with intent to sell it later as it won't be able to be safely repackaged.
Thanks! That is a Haslab afterlife pack that I FULLY modified everything on to make it more real and movie accurate. It has all real hardware, hoses wires, fittings and an accurate motherboard on the back and accurate GB1 Ribbon cable. It would probably take $2000 to get off my hands lol.
@@ghostbusterspluscollector9624 no doubt!! I've seen every video you've done on that pack. LoL two grand is a bit rich for my blood at the moment. Saving up for a new vehicle and my wife will blow a gasket if I spent that much on a proton pack. Unfortunately lmao but you've have one of the sweetest setups I've seen and I've watch hundreds of RUclips videos on these haslab packs. Outstanding sir!!!
I love Quantum mechanical scientific technology very much and sometimes i created the Ghostbusters protonpack and it came out weird but i respect you for Harold, Bill, Dan, and Ernie, for them And the 80s" ❤
@@ghostbusterspluscollector9624 Awesome, thank you. The changes on the first delorean looked really good, looking forward to seeing what you do with this
Oh, by the way, I have two Haslab proton packs with uninstalled mods. I am afraid to mailing it movie accurate. I don’t want to mess it up. I am interested in your pack. I am clearly not as talented as you when it comes to modding 😂
Thanks! It has all real hardware, hoses wires, fittings and an accurate motherboard on the back and accurate GB1 Ribbon cable. It would probably take $2000 to get off my hands lol. But honestly been thinking about putting it up for sale.
Ghostbusters plus collector is going to need to change name to Back to the Future plus collector… tsk tsk sell proton pack to buy Future stuff. … shameful. Doing all that work to sell it???
The paint speckling on the tires and the bottom are weathering but I do agree they should have done it better or just left it off entirely.
👍🏻
It looks amazing. I'm waiting for mine.
👍🏻
I have seen many people had issued with this Mark 2. I had to cancel my order today. Sorry to hear that you had issued on yours too.
Thanks but I was lucky and had no issues with mine, one of the few. I made this video as a joke if you watch till the end. Sorry you had to cancel yours.
Look great!!! Thanks for posting this videoI hope my De Lorean doesn’t have weathered tires or broken axles. 😂 I can’t wait to get my De Lorean and 89 Batman and Batmobile!
Thanks! Hope yours comes in good condition as well 🤞🏻
Thank you!
Are you gonna do a video of you customising it? Would love to see the process
Yeah I’m going to try to 👍🏻
@@ghostbusterspluscollector9624 amazing!!! I get mine in a couple months and would love to do some screen accurate mods to so I’ll keep an eye out for your vids dude ☺️
@@ghostbusterspluscollector9624 what wires did you buy? I got the zip ties/extra plates from mike lane... but I figured the colored wires on this vehicle comes with are good enough. But now you got me thinkin hahaha
@@ghostbusterspluscollector9624 anychance you can make me a "wire set"? I will obviously pay you whatever you want
Te quedasteis sin mesa 😂😂😂
Since this Mark II is elevated on the stand, I would guess that they chose to use a lot more plastic than on the first version just to keep the weight down.
Could be
mine got the silver on the tyres as well not sure what they tried to do
Yeah I have no idea, do you also have it under the car where the lights are?
So nice...I might have to pull the trigger on this?! How high or how tall is this with the stand? I may need buy a display case too to cover this from dust
I will have to measure for you when I get home later
Can I just ask where I can buy the 2015 die-cast number plate you are getting?
Mike Lane Mods
@@ghostbusterspluscollector9624 Thank you. Much appreciated 👍🏼
That’s true the quality seems low Danobys was broken on arrival I’m a little concerned and the other problem is sideshow told me I wouldn’t get mine until they receive stock and the reason as to why is due to a miscount and shortage
Danoby broke his by not extending the wheels fully. Got mine yesterday and it's fine. Didn't have problems with the wire clips or anything like this guy said. No issues with the wheel conversion
@@stephenpatterson8056 I guess that’s reassuring thank you
Hope you get yours soon and that all is good on it. 🤞🏻👍🏻
mine came with a broke side mirror and one of the front bumper clips broke even tho I was extremely careful
@@8bitflea obviously you weren't that careful if they broke lol. But yeah they're designed in a way where I could see people breaking them. Having been building PCs since I was a youngster I've mastered the art of "restrained forcefulness." Sucks about the mirror though. You should almost certainly be able to get a replacement if you act quickly enough. Also KINDA sucks with those clips because there's no way those things are being removed without breaking. They're essentially permanent fixtures. So hope nobody gets one of these with intent to sell it later as it won't be able to be safely repackaged.
the brown looking front bumper on the mark 1 is TERRIBLE. They fixed the color on this one so that was the deciding factor me
I agree 👍🏻
Awesome!! And fyi what's the price on that pack? Interested lol
Thanks! That is a Haslab afterlife pack that I FULLY modified everything on to make it more real and movie accurate. It has all real hardware, hoses wires, fittings and an accurate motherboard on the back and accurate GB1 Ribbon cable. It would probably take $2000 to get off my hands lol.
@@ghostbusterspluscollector9624 no doubt!! I've seen every video you've done on that pack. LoL two grand is a bit rich for my blood at the moment. Saving up for a new vehicle and my wife will blow a gasket if I spent that much on a proton pack. Unfortunately lmao but you've have one of the sweetest setups I've seen and I've watch hundreds of RUclips videos on these haslab packs. Outstanding sir!!!
LOL I hear ya! Thank you so much for the kind words!
Where did you get the metal license plate? And loved the video!!!!👍👍👍👍😃
Thanks! Mike Lane Mods
@@ghostbusterspluscollector9624 Thanks for the quick response!....and bless!👍😃
I love Quantum mechanical scientific technology very much and sometimes i created the Ghostbusters protonpack and it came out weird but i respect you for Harold, Bill, Dan, and Ernie, for them And the 80s" ❤
The tires thing is "weathering". This car is awesome but super fragile.
Super fragile and worst weather job I’ve ever seen lol
Hey, could you link the wires you are getting for your delorean? the inaccurate coloured and lack of cables on the interior bother me.
I will try to find it for you. Got them a while back
@@ghostbusterspluscollector9624 Awesome, thank you. The changes on the first delorean looked really good, looking forward to seeing what you do with this
Thanks!
If you don't pull the wheels all the way out before folding them under, they will break.
Yeah I was so scared when I did it. Plus when the wheels were down I tried not to roll the car much or put any extra weight on them
Oh, by the way, I have two Haslab proton packs with uninstalled mods. I am afraid to mailing it movie accurate. I don’t want to mess it up. I am interested in your pack. I am clearly not as talented as you when it comes to modding 😂
Thanks! It has all real hardware, hoses wires, fittings and an accurate motherboard on the back and accurate GB1 Ribbon cable. It would probably take $2000 to get off my hands lol. But honestly been thinking about putting it up for sale.
I might be interested for the price 😅. If you do decide to put it up for sale, how can PM you?
Poor quality control there. Expect better for the price. But will say its a 1/6 delorean, how can it not be great. Should have just been better made.
Agree
Ghostbusters plus collector is going to need to change name to Back to the Future plus collector… tsk tsk sell proton pack to buy Future stuff. … shameful. Doing all that work to sell it???
That was a joke lol that pack will be buried with me lol