the mounting is thought provoking a I deal wth the same tight space got an idea about raising the seat about 1" with machinery vibration isolation pads?
I have two rows of Tuscany. One I bought in 2020 and one in 2022. Both have different frame. One from 2020 is same as yours. Other one doesn’t have wood back board. I want to add butt kicker to the seats which doesn’t have wood frame. It is all metal frame. I may have to put board front to back on metal frame. Any thoughts?
@@budala1969 I ended up in buying everything including butlickers, amp and plywood but didn’t do anything yet. It has been a year now. I just need some motivation to flip those chairs and figure it out. I think I may be able to do side to side. I have to make some holes in the frame and I will need to put plywood on top of side frame( not under the frame) to avoid plywood to touch carpeted floor. If it touch carpet I may loose some vibrations in the wrong direction.
Thanks for the helpful insight on this.. In the case of having two bass shakers and no middle arm section for the Valencia Tuscany love seat.. Would I still benefit more doing it this way than having closer to the seat springs? Any insight is appreciated!!
Do you know if it would work doing it this way with the aura sound bass shaker on the Tuscany recliner? After getting a second look of the measurements it doesn’t look like the aura sound would fit with a bolt coming out the other end cause of the heatsinks sticking out. Would you advise going with the buttkickers instead? I love the lower frequency rumble but don’t want to be overkill and spend more than necessary. Any help is appreciated and enjoy the content!
9:15: can you talk a bit more about what how the shaker should and should not be set on the MDF? This part you said so quickly that Ibcould not understand what I need to avoid. Thanks!
Coming from the sim world I’m wondering if you can feel the difference between. The two when sitting. I guess I’m this application they both have same signal so I guess I’m answering my own ?… at least RUclips algorithms will like the comment lol
I really like these videos. The setup is WAY more advanced than my system, but I get good info and “one day I will” ideas.
Love these videos, very helpful and inspiring. Still would wish for a BOM to be posted in the description though.
Nicely done!
the mounting is thought provoking a I deal wth the same tight space
got an idea about raising the seat about 1" with machinery vibration isolation pads?
Do you think the mid sized Buttkicker would fit in the middle as a single instead of two mini ones?
No
@@COGuyStuff thank you sir
I have two rows of Tuscany. One I bought in 2020 and one in 2022. Both have different frame. One from 2020 is same as yours. Other one doesn’t have wood back board. I want to add butt kicker to the seats which doesn’t have wood frame. It is all metal frame. I may have to put board front to back on metal frame. Any thoughts?
This is exactly what I'm considering. What did you end up doing?
@@budala1969 I ended up in buying everything including butlickers, amp and plywood but didn’t do anything yet. It has been a year now. I just need some motivation to flip those chairs and figure it out. I think I may be able to do side to side. I have to make some holes in the frame and I will need to put plywood on top of side frame( not under the frame) to avoid plywood to touch carpeted floor. If it touch carpet I may loose some vibrations in the wrong direction.
Thanks for the helpful insight on this.. In the case of having two bass shakers and no middle arm section for the Valencia Tuscany love seat.. Would I still benefit more doing it this way than having closer to the seat springs? Any insight is appreciated!!
Yes this is still better
@@COGuyStuff Thanks for the reply. Would 1 inch thick wood be too thick?
Doesn’t matter
Do you know if it would work doing it this way with the aura sound bass shaker on the Tuscany recliner? After getting a second look of the measurements it doesn’t look like the aura sound would fit with a bolt coming out the other end cause of the heatsinks sticking out. Would you advise going with the buttkickers instead? I love the lower frequency rumble but don’t want to be overkill and spend more than necessary. Any help is appreciated and enjoy the content!
Yes they would fit, I had those before. Almost the same size.
9:15: can you talk a bit more about what how the shaker should and should not be set on the MDF? This part you said so quickly that Ibcould not understand what I need to avoid. Thanks!
Sorry. I just said make sure it’s not touching the metal seat frame
need picture of the friend's setup :)
He's still building and upgrading - when he's done or near done I'll hit him up for a video tour :)
Coming from the sim world I’m wondering if you can feel the difference between. The two when sitting. I guess I’m this application they both have same signal so I guess I’m answering my own ?… at least RUclips algorithms will like the comment lol
Wait no invite 🤣 3beers