Buy a FogHashing immersion system DISCOUNTED! voskco.in/fh Buy your own Bitcoin miners here - voskco.in/am Altair Tech PDUs and BTC ASIC parts - voskco.in/altair *Use code VOSKCOIN to save some COIN!*
Glad to see all your progress. Congrats! What I do not understand, and I don't know if you have thought about it, is why keep using 30 amp circuits for ASIC miners? If you follow the 80% rule, the 30 amp circuit will support only ONE x19j pro miner without any overclocking or underclocking. If you install, and you can do it, 50 amp circuits, you would be able to connect THREE x19j pro miners per circuit without overclocking or underclocking. I have done it (the electrician actually did it) and I am running THREE ASIC x19j pros on a single 50 amp circuit. Think about it and the amps you are wasting by just connecting one ASIC per 30 amp circuit. Just a suggestion to make the most efficient use of your power. All the best.
This seemed like a really good view into your mind and how you think. We are too much alike. It sounded like a video I would make talking about almost any project I'm working on.
Thank you so much for making you content! What percentage of your energy goes to Running minors and what percentage of your energy goes to cooling minors? Such a cool channel!
if you plan for hundreds of miners and you know how to treat water with inhibitors, pH stabilizers, etc. (in fact a small lab is needed or an automated CDU system) then HYDRO is the right choice immersion is easier but more costly upfront, you can start with just one or two miners (see DCX Bitpod), and you have dozens of different ASIC models to be selected, so for small scale I recommend immersion
the pump at the tank is 270W at max speed the dry cooler pump is also 270W plus two 350W fans at max speed (there is electronic fan speed controller that may turn the speed of fans down)
Been watching your videos for years, kudos on your success man. Awesome stuff! Edit: I find it very exciting that you show us your whole farm in this video. So much info I’ve always been curious about but never really knew how you had it set up.
PS: Don't worry about reversing the door to locate the hinges inside for security reasons, just buy security (European style) hinges that essentially have built in pins/dead/bolts that engage in each hinge by closing the hinge. You look like you need the door to open outwardly to maximize usable space inside, for the minors you haven't thought about... 😄
i still dont undertand the reasoning. how much was each immersion tank completely installed? when do you expect to ROI. maybe that will help me understand. your noise being reason number one seems ludicrous since you arent in a congested area where noise is an issue. seems more like paid promotion.
immersion is not only about the noise reduction for home-based miners this could be the main reason (that's why you wish to buy a quiet device and not a screaming pump ;-) but there is also miners protection, no maintenance, stable temperature, overclocking ability, no fire hazard, corrosion protection, and dust protection....
Luckily none of our immersion setups have been "screaming." The FogHashing unit was slightly louder in the beginning but has since quieted down and has been performing great. Both DCX and FogHashing are great immersion options for the at-home miner.
Buy a FogHashing immersion system DISCOUNTED! voskco.in/fh
Buy your own Bitcoin miners here - voskco.in/am
Altair Tech PDUs and BTC ASIC parts - voskco.in/altair
*Use code VOSKCOIN to save some COIN!*
Glad to see all your progress. Congrats! What I do not understand, and I don't know if you have thought about it, is why keep using 30 amp circuits for ASIC miners? If you follow the 80% rule, the 30 amp circuit will support only ONE x19j pro miner without any overclocking or underclocking. If you install, and you can do it, 50 amp circuits, you would be able to connect THREE x19j pro miners per circuit without overclocking or underclocking. I have done it (the electrician actually did it) and I am running THREE ASIC x19j pros on a single 50 amp circuit. Think about it and the amps you are wasting by just connecting one ASIC per 30 amp circuit. Just a suggestion to make the most efficient use of your power. All the best.
This seemed like a really good view into your mind and how you think. We are too much alike. It sounded like a video I would make talking about almost any project I'm working on.
Thank you so much for making you content!
What percentage of your energy goes to Running minors and what percentage of your energy goes to cooling minors?
Such a cool channel!
Could you please give some idea which one we should deploy... Hydro / immersion? Thank you
if you plan for hundreds of miners and you know how to treat water with inhibitors, pH stabilizers, etc. (in fact a small lab is needed or an automated CDU system) then HYDRO is the right choice
immersion is easier but more costly upfront, you can start with just one or two miners (see DCX Bitpod), and you have dozens of different ASIC models to be selected, so for small scale I recommend immersion
Do you have power usage numbers for the DCX (without the mining rigs)? How much power does it take to run the DCX by itself?
the pump at the tank is 270W at max speed
the dry cooler pump is also 270W plus two 350W fans at max speed (there is electronic fan speed controller that may turn the speed of fans down)
what is the name of material you use outside of shed
why isnt there a rubber ducky in the immersion cooler?
Been watching your videos for years, kudos on your success man. Awesome stuff!
Edit: I find it very exciting that you show us your whole farm in this video. So much info I’ve always been curious about but never really knew how you had it set up.
Love it! Glad we were able to give you a more clear behind-the-scenes type tour.
PS: Don't worry about reversing the door to locate the hinges inside for security reasons, just buy security (European style) hinges that essentially have built in pins/dead/bolts that engage in each hinge by closing the hinge.
You look like you need the door to open outwardly to maximize usable space inside, for the minors you haven't thought about...
😄
Let's vote for Vosk to make a shed dedicated for susbcribers investors hahaha
Did he say wire management? *Checks to see if skies are red*
For that door... Inside hinges and no windows would be the way to go.
Are the immersion miners using mineral oil?
The tubs have dielectric fluid in them!
Do some major security also , there are scummy people out there who can figure out your location just from outdoor pics
i still dont undertand the reasoning. how much was each immersion tank completely installed? when do you expect to ROI. maybe that will help me understand. your noise being reason number one seems ludicrous since you arent in a congested area where noise is an issue. seems more like paid promotion.
immersion is not only about the noise reduction
for home-based miners this could be the main reason (that's why you wish to buy a quiet device and not a screaming pump ;-)
but there is also miners protection, no maintenance, stable temperature, overclocking ability, no fire hazard, corrosion protection, and dust protection....
Luckily none of our immersion setups have been "screaming." The FogHashing unit was slightly louder in the beginning but has since quieted down and has been performing great. Both DCX and FogHashing are great immersion options for the at-home miner.
cool
A 42 minute commercial for asic mining rigs! 👍🏽😏
idgaf if you buy any, this is a vlog anthony
Keep your coolers on the shady side and out of the sun. They will not have to work as hard doing their job.
Such a nerd! Luv it! :)
your lack of solar and ample land hurts me. lets build a solar farm bruh!
VOSKGOAT