GTMedia Finder V8 (V73-HD, Latest Gold Colour Model) QO-100 Beacon - Octagon Green Cap Quad LNB
HTML-код
- Опубликовано: 11 дек 2024
- Was just aligning one of my dishes and thought i'd see if this thing would work with the QO-100 Beacon, indeed it does and tunes outside the normal domestic satellite range. I will have to see if it will tune in lower SR's
Cheap useful tool for alignment and an added bonus you can align to the QO-100 Beacon.
حبيبي يا باشمهندس
Nice video how much price this finder
Sorry
Disculpe, para la recepcion de los canales libres, por ejemplo del Satélite Aztra brinda, me sirve una antena satélital vieja? Y/O a esa antena se le necesita comprar LNB universal, ya que (la antena con su lnb) era de una compañía de tv Satélite de paga.
Salam satfinder v8 uzbi nece acilar
Hi Dale ! Nice video / thanks. Have same V8. Could you advice me how to find Es'Hail on this device? Did you manually find the satellite or via scan ? ( In my sat listing there is no Es'Hail 2 or 1 to be indicated. etc. Ye advicve is highly appreciated. 73 Albert PA5OXW
Hi Albert,
There are 2 ways to do this. Either manually add a transponder on an existing satellite such as BADR 4 (Easier for aligning as you can move the dish to a strong BADR 4 transponder/Channel such as BBC Arabic) Or manually create a Satellite and name it Eshail2/QO-100, you just need to enter in the frequency/symbol rate of the transponder you want such as the QO-100 beacon/promo, also it will receive DATV on 1000KS or above. All this can be done directly on the device if you have the Gold V8 V-73HD
If you need any more information please ask me. de 2W0ODS
Thanks Dale ..will try again tomorrow ..bear with me ..73 Albert PA5OXW I
Hi Dale..unfortunately no luck yet..assume you fill 10495 Mhz & 6500ks with sat at 26 E ? You are using different / more data ? 73 albert
@@avdeur Hi Albert, the frequency you need to add is 10492 H 2000SR, what LNB are you using?
Ok Dale! Thanks yr reply again. I will use yr indicated freqs. Have an unmodified Octagon duo feed with very standard lo's of 9750 and 10600. Keeping you posted again! 73 Albert PA5OXW
Hey, When setting up antenna, does the LNB freq need to be 9750 or 10000? I’ve tried with both and can’t get the qo100 beacon, but I get a shed load of channels from badr.
What LNB do you have? If its a Standard Universal LNB just set it to "Universal" 9750 - 10600. If it's anything different post the model here and I'll find the frequency of the LO.
Dale Robins I’m using a new LNB which is just about to be released called a bullseye. Ultra stable without mods. But yes, that’s the correct freq. I think I figured it out why mine isn’t working and that’s coz my dish is pointing to BADR so need to move it a few degrees for qo100. Cheers!
@@TechMindsOfficial What's the LO for that LNB?If you are getting BADR you should receive QO-100, its less than a few degrees. Does it have a High and Low LO? You might just be picking up signals from one band or polarisation, check the same band and polarisation on a known working transponder that's on BADR which is Horizontal and Low band.
เครื่องติดตั้งจานผมมันไม่มีดาวที่ผมต้องกานครับช้วยหน่อยครับ
بكم سعره وين موجود في مصر
i need siftware
Nice video .but this finder is too bad. Especially gtmedia v8 model no v-73 is not good. Fake battery , no any software update and it read very low quality