Not once in my life have I had a pleasent experience with those damned things. Phones, games, it doesn't matter, in the end you go through a whole pack of covers because each attempt before blows up in your face. Why can't these things just... come already ATTACHED??
A L What if the steam goes through the phone ports (headphone jack, speaker grill) and then condensation happens and now there's water in your phone that can potentially damage the phone.
Otherwise good, but it's better *not* to completely remove first sheet before start applying it. Instead, remove just start of it, press protector on screen and peel more of the first sheet as you apply the protector on screen. This eliminates changes of dust particles getting to protector and you don't have to hurry up the process.
I bought my phone last week and those people refuse to put the screen protector for me unless I pay money, seriously.. Am glad I saw this video, hopefully I'll do it perfectly. Thank you👏😍😘.
You made a big mistake. Before you even clean the screen, match up the protector to your screen so you have a good idea of exactly where you're going to try to put it. Then clean and immediately peel the first layer.
I did get a Zagg at first, but the problem was that because it covered the whole front it wouldn't work with my case (it would bubble at the ends or peel). That's why I got one of these screen protectors. But usually, I go with Zagg because I think they're better overall.
*The biggest secret to applying a screen protector* Run a hot shower as hot as you can get it, door closed, fan off, for about 15 minutes. So much so that the mirror in your bathroom starts to sweat. When you do this the steam weighs down the dust floating in the air and brings it to the floor. Then go in, close the door and keep running the hot shower (not necessary but as a precautionary measure) wash your hands very very well, then apply it to your phone. I've been doing this for years and have not had a single problem since.
Tutorial: 1. Watch this video 2. Try to put yourself the foil 3. To much dust but you still try to put it on 4. Give up ,throw the foil and go crazy because you waste the money
yeah i tried doing that and failed miserably. went to a phone shop in a mall and the nice lady did it absolutely perfect and i gave her a 100% tip, if you are not good with this sort of stuff like i am don't bother, just go to a professional:).
I took it slowly. Maybe about 10 minutes or more. Tape in the middle and top left and bottom left corners. I used a slightly damp microfiber cloth. I let it dry a bit after the screen was slightly damp. Wiped off the wet residue on the screen until everything was crystal clear. Then used the tape to pull off dust. After the dust was off completely, I pulled the back side off slowly. Then the front side slowly. What I ended up with was a virtually bubble free screen. There was only a bubble on the top right of the phone but that wasn't on the screen. Excellent video and am glad I bravely did this.
I recommend not pealing the hole back side, just a bit, then aligning it with the top and start to work your way down. as you do so you will peal the hole plastic and you should be good to go. This way you'll prevent the dust sticking on the glue of the protector itself. Worked for me 3 out of 4 times.
I got a screen protector off amazon and I had hard time putting it on straight perfectly so my finger prints got on the sticky part and I tried putting it on again it had too many stuff on it so I gave up im not throwing it away.. yet also I my got a case and I put on it and the power button wont mash on it!
you guys make it so hard for yourself lol, peel just abit of the first layer off then put the first inch of the screen protector down then peel the rest off while applying the screen protector at the same time. this way you dont get finger prints, or it flying off your finger while your trying to put it down in one go or any dust while your moving it around and also no air bubbles. peeel and apply sheit i think i need to make a video of this
Easier said that done mate, i just applied one soooo carefully and yet I still have about 30 bubbles underneath, and i tried lifting it numerous times to redo it and still had bubbles! The bloody thing is s nightmare to do, i don't make it easy for myself though, I'm doing it on a 10" tablet screen by the way, not a phone
Thanks a lot for this video, bought a new s4 and messed up with the screen protector the first time, luckily I had this the second time and it came out bubble-free!
Finally my screen is successfully protected, shortly after I watched your tutorial. You make it easy. I only got two small bubbles at the edge but its ok. Thank you so much. God bless you👌👍😘
Thanks! I just got a new phone and I bought 2 screen protectors and completely ruined the first one trying to put it on! This helpd a lot so thank you!
Helpful video, and thanks. By the way, which weather and clock widget is it that you're using? I like the old flip-numerals look and haven't seen that one in my default apps.
This is the 3rd time that I watched this and I did it as I watched you, I still got a few small bubbles but it's better than my firs time. The first time I peeled the number 1 side off and laid it down and when I TRIED to pull the 2nd TAB off I couldn't get it all the way off. After watching this and doing mine at the same time I realized what I did wrong- I left the 2nd covering on the phone ! Duh !!!!! Thanks for the video, now my phone is responding to touch better as well as protected from scratches !
"Try to put the protector on as quick as possible after cleaning the phone" *proceeds to waste time talking about the quality of his screen protector and where he got it*
Once I got a screen saver and tried to put it on but I took it off cuz I messed up and then it became covered in dust that I couldn't get off. Then I tried to wash it off with water but a ton more dust got on. I thought I had to buy a new one but then I decided to use a lint roller on it and it took off all the dust!!
You people need to gets life's stop hating on this guy .. This video helped me out I watched it after wrecking 2 screen protectors and got this one on mint .. Bottom to the top is the key and the bathroom is a perfect spot to do it with bright lights from above the mirror/medicine cabinet :) thanks for the video man and I hope my comment helps a little.
important tip: keep a clear adhesive tape handy... use it to take out any dust that are causing the bubbles. You can also use the tape to lift the screen protector off the phone without risking to crease/bend it accidentally. peace.
I did it today, not perfect i have one small bubble at the end but honestly I'm happy with it, I thought it would be much worse, I think the trick is as you said , is to do it fast and without shaking
This looks like a pretty good install. I've only 1x, in many attempts EVER managed to get close to this. I'd happily pay someone to do it for me, providing I could get a bubble free result, but I've found that, even if you ask someone at the Carphone Warehouse, they'll gladly take your money but the result isn't always perfect. Better still, why don't the people who make these things come up with some form of glass that is really scratch resistant? IMO, all these cases/protectors are a con.
Same brand protector. Hmm, still have a few bubbles, but it does the job as you can't see them when the screen is illuminated. The place offered to put it on for a charge, but I said I'd do it myself. Perhaps if I replace it I won't be so stingy. They aren't permanent so no worries. I wonder if they have a trick of their own.
There is a chinese manufacturer, Zopo, that does exactly that. Every phone i've bought from that brand (Zopo ZP500+ and my actual phone, a Zopo C2 Platinum) had a pre-applied screen protector. Two, in fact, the one with the specs on, and a clear one behind. No bubbles and perfectly aligned.
After watching other videos, your the only one who mentioned that "you have to do it really quikly and apply the cover because the just bad if you take your time" which was the best tip and the only thing anyone needs. Fuck I went through 3 covers and after watching yours, it only took once! Apreciate it bro!
One other tip: Use lighter fuel. Put just a tiny drop over the phone's screen. Fuel or oil for that matter gives a layer of coating over the screen which somehow prevents dust particles such as dust "worms" from settling which results in formation of bubbles. After you have applied the layer of fuel, apply the screen protector. 100% guaranteed no bubbles no matter how hard you try to introduce them. At least that worked for me.
Going to get a mirrored screen protector in a week so i need some tips xx im really scared to try but exited because i think theyll only give me 1 in the packet!!
Instead of throwing away the perfectly good screen protector you can just lift an edge of the screen protector then use a piece of tape to remove the dust and your done, no more bubbles. There are plenty of videos on how to remove the dust particles.
i love your intro song its so good. As u can see, its hard to put a screen protector, so i wont put... even when u did it right it had annoying bubble in corner
this is the hardest thing in the world period
Full stop
For sure. This shit pisses me off more than cling film.
facts
Fr
Try getting earbuds to stay in your ear
I just bought a 3 pack of screen protectors and ruined all of them.
Lord Windstar lol
me too 😂😂😂😂
Same
😂😂😂
Same here😂
Hard as I try, my phone still ends up looking like the inside of an Aero.
+Sergio Georgini Same... but it is my favourite chocolate bar.
+3DNarutoGaming and that's why it's annoying cos you can't even eat it
FarhanDoesStuff lmao you speak the truth
Git Gud lol
You: "do it in a dust free environment"
Me "it time to go to space"
There's dust in space too...
Yeah
yeah. space dust. lol
Vaccum joke.. huh!!🙄
@@locke_ytb aw shit!!!!!
These bubbles, they haunt me, I went through 6 screen protectors, SIX, I'm just gonna get a professional to do it
I know, right!! I've used 3 and taken them off right after I put them on cause of the damn bubbles! I keep messing it up, can't do it!! 😱
LoL it's so easy that you guys have to watch a video
Ur phones prolly cracked den
I did it... And now I'm still watching thru bubbles 😞
Me2 bro
Mee to
Omg.. I'm scared... My heart beating so fast.. Going to do it for the 1st tym
@@PP-nj1de we'll pray for you
I cried
I'm still convinced this is black magic.
It is
Not once in my life have I had a pleasent experience with those damned things. Phones, games, it doesn't matter, in the end you go through a whole pack of covers because each attempt before blows up in your face. Why can't these things just... come already ATTACHED??
Ikr
Some phones nowadays have pre-applied screen protectors right out of the box. This should honestly be adopted by every single phone company out there.
Fr
Get get a dust free environment - do it in your bathroom after you took a shower - the hot steamy air eliminates dust.
A L What if the steam goes through the phone ports (headphone jack, speaker grill) and then condensation happens and now there's water in your phone that can potentially damage the phone.
@@mysterioussheep3435 u must have a phone from 2008 if steam is damaging ur phone
@@Filthyt, wow dude 😂
Is it weird that you search this when you already tried it for yourself and completely fucked everything?
Lol this is me
messed up wish I knew
Just threw mine away, so fucking pissed right now.
Same
+Mopstorte I won't be too pissed, I mean, I'm getting a $10 case that's more durable than lifeproof with a free screen protector, so it's not a loss.
Otherwise good, but it's better *not* to completely remove first sheet before start applying it. Instead, remove just start of it, press protector on screen and peel more of the first sheet as you apply the protector on screen. This eliminates changes of dust particles getting to protector and you don't have to hurry up the process.
I bought my phone last week and those people refuse to put the screen protector for me unless I pay money, seriously.. Am glad I saw this video, hopefully I'll do it perfectly. Thank you👏😍😘.
I got so mad when I tried this I just went to a Verizon store and asked them if the could do it and they did it perfectly
Black magic
Black magic
Did u need to pay money?
@@roseedits3776yes
Didn't work for me, got so frustrated that i crumpled the screen protecter into a a ball...
LOL....Can understand your feelings ! :-)))
thats a weak screen protector
Lol
You made a big mistake. Before you even clean the screen, match up the protector to your screen so you have a good idea of exactly where you're going to try to put it. Then clean and immediately peel the first layer.
I did get a Zagg at first, but the problem was that because it covered the whole front it wouldn't work with my case (it would bubble at the ends or peel). That's why I got one of these screen protectors. But usually, I go with Zagg because I think they're better overall.
In Mumbai, kids at railway stations do these things in 30 seconds. Perfectly too! As they say, 'let the experts do their own thing'.
I just applied a screen protector for the first time and got zero (0) bubbles :) it’s all thanks to you. Thank youuu 💕💞
*The biggest secret to applying a screen protector* Run a hot shower as hot as you can get it, door closed, fan off, for about 15 minutes. So much so that the mirror in your bathroom starts to sweat. When you do this the steam weighs down the dust floating in the air and brings it to the floor. Then go in, close the door and keep running the hot shower (not necessary but as a precautionary measure) wash your hands very very well, then apply it to your phone. I've been doing this for years and have not had a single problem since.
thenk you
Pixellized Gamer 👍
MadeInVolantis no way this is real
TheGameDose Try it.
MadeInVolantis thanks bro! very smart idea!
I did this and it came out amazing. Thanks so much! I finally know how to put on screen protectors lol.
Oh my goodness. Really?!?!? It is sooooo hard
dooood lucky
Tutorial:
1. Watch this video
2. Try to put yourself the foil
3. To much dust but you still try to put it on
4. Give up ,throw the foil and go crazy because you waste the money
Ended up with 1 small (ish) bubble, not bad for a first attempt. Thank you for the guide, it helped enormously.
PhoneBuff: Make sure to put on your screen protector as fast as you can
Also PhoneBuff: *Takes 2 minutes to explain whole process*
Up
yeah i tried doing that and failed miserably.
went to a phone shop in a mall and the nice lady did it absolutely perfect and i gave her a 100% tip, if you are not good with this sort of stuff like i am don't bother, just go to a professional:).
Tried it on my iPod nano. Worked perfectly. Thank you.
This method is definitely the best. Barely any bubbles. Thank you.
I took it slowly. Maybe about 10 minutes or more. Tape in the middle and top left and bottom left corners. I used a slightly damp microfiber cloth. I let it dry a bit after the screen was slightly damp. Wiped off the wet residue on the screen until everything was crystal clear. Then used the tape to pull off dust. After the dust was off completely, I pulled the back side off slowly. Then the front side slowly. What I ended up with was a virtually bubble free screen. There was only a bubble on the top right of the phone but that wasn't on the screen. Excellent video and am glad I bravely did this.
I recommend not pealing the hole back side, just a bit, then aligning it with the top and start to work your way down. as you do so you will peal the hole plastic and you should be good to go. This way you'll prevent the dust sticking on the glue of the protector itself. Worked for me 3 out of 4 times.
I got a screen protector off amazon and I had hard time putting it on straight perfectly so my finger prints got on the sticky part and I tried putting it on again it had too many stuff on it so I gave up im not throwing it away.. yet also I my got a case and I put on it and the power button wont mash on it!
Hey, that's really cool of you to take your time to show ppl how to do this seemingly simply task (yes, the bubbles make me crazy, too). Thank you!
The one I used in the video was called "CrazyOnDigital Ionic" that I bought from Amazon.
Wow, this worked beautifully. That's the first time that I was able to perfectly apply a screen protector. Thanks for the video!!!
Was worried about bubbles since I didn't have a squeegee on me, but, first attempt turned out OK & I did it just like this. Thank you!!!
Thank you so much! My husband and I were able to apply the screen protector with no bubbles! Thanks
you guys make it so hard for yourself lol, peel just abit of the first layer off then put the first inch of the screen protector down then peel the rest off while applying the screen protector at the same time. this way you dont get finger prints, or it flying off your finger while your trying to put it down in one go or any dust while your moving it around and also no air bubbles. peeel and apply sheit i think i need to make a video of this
I actually think making a video of it would be really helpful for the lot of us.
Easier said that done mate, i just applied one soooo carefully and yet I still have about 30 bubbles underneath, and i tried lifting it numerous times to redo it and still had bubbles! The bloody thing is s nightmare to do, i don't make it easy for myself though, I'm doing it on a 10" tablet screen by the way, not a phone
i did.........cost me 3 protectors mine were glass not plastic
ugh I wished I would've watched this before
+Marc Avila SAME HERE
Ikr
same
same its so dirty now kept re-applying
Thanks. This was very helpful for a first timer like me.
Thanks a lot for this video, bought a new s4 and messed up with the screen protector the first time, luckily I had this the second time and it came out bubble-free!
Tried on my iphone 6s , worked perfectly without any bubbles , thanks dude
I like this video. Every step was helpful. It also taught me patience because I have wasted so many of these screen saver by rushing.
Saw the video, and still managed to fuck up
same
Shpongly me 2
i feel that bro
Kamal Kishore bro hug to you.. Bro
Finally my screen is successfully protected, shortly after I watched your tutorial. You make it easy. I only got two small bubbles at the edge but its ok. Thank you so much. God bless you👌👍😘
This really helped ,thanks! Got the protector on with no bubbles on the screen and only 2 near the home button :)
Thanks! I just got a new phone and I bought 2 screen protectors and completely ruined the first one trying to put it on! This helpd a lot so thank you!
Helpful video, and thanks. By the way, which weather and clock widget is it that you're using? I like the old flip-numerals look and haven't seen that one in my default apps.
Very good video. It's way easier to put the screen protector the way you did on the video. Thanks a lot!
This is the 3rd time that I watched this and I did it as I watched you, I still got a few small bubbles but it's better than my firs time. The first time I peeled the number 1 side off and laid it down and when I TRIED to pull the 2nd TAB off I couldn't get it all the way off. After watching this and doing mine at the same time I realized what I did wrong- I left the 2nd covering on the phone ! Duh !!!!! Thanks for the video, now my phone is responding to touch better as well as protected from scratches !
You've talked for six minutes and conveyed no more information than the 3 line instructions that came with my screen protector.
"Try to put the protector on as quick as possible after cleaning the phone"
*proceeds to waste time talking about the quality of his screen protector and where he got it*
Once I got a screen saver and tried to put it on but I took it off cuz I messed up and then it became covered in dust that I couldn't get off. Then I tried to wash it off with water but a ton more dust got on. I thought I had to buy a new one but then I decided to use a lint roller on it and it took off all the dust!!
Thanks!! Same thing happened to me and I didn't know what to do! Your advice really helped thanks for commenting :)
Dude thank you! This really helped with putting a screen protector on my new Switch!
You people need to gets life's stop hating on this guy .. This video helped me out I watched it after wrecking 2 screen protectors and got this one on mint .. Bottom to the top is the key and the bathroom is a perfect spot to do it with bright lights from above the mirror/medicine cabinet :) thanks for the video man and I hope my comment helps a little.
important tip: keep a clear adhesive tape handy... use it to take out any dust that are causing the bubbles. You can also use the tape to lift the screen protector off the phone without risking to crease/bend it accidentally. peace.
Thank you very much. Done perfectly which I wouldn't have without your video. Cheers!!
you are a gentleman and a scholar, thank you.
I did it today, not perfect i have one small bubble at the end but honestly I'm happy with it, I thought it would be much worse, I think the trick is as you said , is to do it fast and without shaking
I did something I never did before.... read the directions :0 and it came out 👌🏽
I bought a screen protector for like 2 bucks and it came with wipes and I'm legit happy
It wasn't perfect, but the best method I've found so far. Thanks.
This was very helpful, also I love your blue wallpaper.
Thank you. You helped me very much! and btw haters, shut up!! If you don't like the video find a different one. Don't hate on him.
I literally just dropped the screen protector flat onto my phone and it managed to stick itself to the phone flawlessly without any given effort.
Off course,stupid kid
+Beeaast Georgel I said flawlessly... meaning no bubbles..
+Beeaast Georgel of* stupid kid
+River Hunt Lol trying to be but he can't spell right.
No problem. I'm the same way as you, the very slightest bubble will drive me crazy. What did we ever do before the internets to learn these things?
This looks like a pretty good install.
I've only 1x, in many attempts EVER managed to get close to this.
I'd happily pay someone to do it for me, providing I could get a bubble free result, but I've found that, even if you ask someone at the Carphone Warehouse, they'll gladly take your money but the result isn't always perfect.
Better still, why don't the people who make these things come up with some form of glass that is really scratch resistant?
IMO, all these cases/protectors are a con.
Same brand protector. Hmm, still have a few bubbles, but it does the job as you can't see them when the screen is illuminated. The place offered to put it on for a charge, but I said I'd do it myself. Perhaps if I replace it I won't be so stingy. They aren't permanent so no worries. I wonder if they have a trick of their own.
There is a chinese manufacturer, Zopo, that does exactly that. Every phone i've bought from that brand (Zopo ZP500+ and my actual phone, a Zopo C2 Platinum) had a pre-applied screen protector. Two, in fact, the one with the specs on, and a clear one behind. No bubbles and perfectly aligned.
Is this landon mcbroom talking !? Lmao
Thanks for the info. BTW ...caffeine much?
this is very good review .I apply to my phone it works fine
Thank you. This seems like a great way to place screen cover
next time say :" Get the cat Away" because his fur killed me
you say cat i say dog
Use glass screen protectors. They offer better protection, are easier to apply and leave less air bubbles which can be squeezed out easily.
This video helped alot because i am gonna get a new phone soon .... so thanks :)
After watching other videos, your the only one who mentioned that "you have to do it really quikly and apply the cover because the just bad if you take your time" which was the best tip and the only thing anyone needs. Fuck I went through 3 covers and after watching yours, it only took once! Apreciate it bro!
Thanks for taking time to make this!
Worked perfectly. Thank you
One other tip: Use lighter fuel. Put just a tiny drop over the phone's screen. Fuel or oil for that matter gives a layer of coating over the screen which somehow prevents dust particles such as dust "worms" from settling which results in formation of bubbles. After you have applied the layer of fuel, apply the screen protector. 100% guaranteed no bubbles no matter how hard you try to introduce them. At least that worked for me.
please how many (in ml)
really helpful thank you for the video you are a phone savior
didnt work >:( unsubscribed and disliked learn2make videos n00b
Thank you man! Turned out perfect.
This was a big help. Thank you.
Thanks! This worked wonders for me
excellent video! Thanks for the upload as it really helped and has made it easier to do!
Going to get a mirrored screen protector in a week so i need some tips xx im really scared to try but exited because i think theyll only give me 1 in the packet!!
This was really helpful I got it right the first time I tried it :)
Great tips!! Thanks for posting!!
Instead of throwing away the perfectly good screen protector you can just lift an edge of the screen protector then use a piece of tape to remove the dust and your done, no more bubbles. There are plenty of videos on how to remove the dust particles.
Thanks dude, I got right the 1st time thanks to your video
works fine, thanks! My phone is like a new one :)
Thank you for this! Good instructions.
Thank you. I did good job for my new Droid mini.
This helped me so much right now! (: Thank you!
thank you this vid saved me from frustration 😂
i have done it successfully although there are some bubbles but they're unnoticeable still I am satisfied with the results
Ohh my God thank u so much I did it and it came out perfect thanks great video.
Always apply a screen protector in a bathroom with your shower runnning, steam in the room helps eliminate dust..
Works for me
2:55 face reveal..... :)
Oh and I probably won't get likes because I'm a loner lol.
Thanks bro done a great job👍
i love your intro song its so good.
As u can see, its hard to put a screen protector, so i wont put... even when u did it right it had annoying bubble in corner
Omg this worked perfectly for me! Thank you so much
lol I looked up how to install a screen protector and I clicked on this video. I only realized who it was when I heard your voice.
Starts at 1:53 your welcome
Thx