Yup I feel you there, motherboards have gotten crazy expensive. I'm a big fan of this one, been holding up great so far and has all the features you'd need. I think you'd be happy with it!
Hello Sam, first thank you for the review, but I bought the same motherboard and the MOSFET heatsink can be moved if pushed by finger, is this normal? Can you check if it's moving for you too, this is a damage in my motherboard,please. I'm freaking out
Hello! Don't worry, mine actually has a little bit of give as well. It can be moved slightly if I push it forward or back. I know it feels loose, but the heatsink is still making contact with the right components and will keep them cool. Also, the power draw on this board is low enough that only minimal cooling is required for the VRMs and MOSFET, so you should be okay. If you are very concerned about it, you may actually be able to tighten the screws down for the heatsink, which should be accessible on the back of the motherboard. Just be sure not to overtighten. I'm sure you could reach out to ASRock as well, but to me it doesn't seem like a major issue. I stress-tested my board and even at 100% CPU load, I was only getting around 48C max temp on the VRMs and MOSFET, which is very cool and well below any concerningly high temps.
Not the best, no where near the best. and tack off the dumb hat. Now without the hat and calling it the best you would of hade a subscriber. but now I know all your opinions are bias and opinion and not facts.
I'm sorry you don't like my hat, but you can't deny that for the money this is one of the most feature packed value B650 m-ATX motherboards you can buy. Which is exactly the market ASRock seeks to occupy. Nothing bias about looking at the spec sheet. Also... Go Birds!
@@SamWhyze Asrock has the absolute worse customer support out of all the competitors so no. If you're going to hide behind price than any motherboard from aliexpress, TEMU or Sheen will do. Its the same as every other motherboard at that price right now. For the price the msi pro a620 is $75. Overall a good unboxing but calling it the best is the same as calling Philadelphia Eagles the best, nope that's a bold face lie and bias. its your favorite because its yours it's not the best. on here stick to facts. No favoritism, politics or personal opinions. Have you seen any other videos? Take notes any channel that show any of those 3 like you have with this video do poorly you alienate most of your viewers or in your case potential viewers. But good luck if you continue it was very informative.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Solid looking board! Might need to pick this one up for my mext build!
I definitely recommend it! High quality, tons of features, and low price make this one of the best options out there.
The video looks good you just need to post more
Thank you! Yes definitely one of my goals. I appreciate the feedback.
Very nice looking board. I wax thinking either this or the ROG 650E-I but at 300 bux, ouch.
Yup I feel you there, motherboards have gotten crazy expensive. I'm a big fan of this one, been holding up great so far and has all the features you'd need. I think you'd be happy with it!
Hello Sam, first thank you for the review, but I bought the same motherboard and the MOSFET heatsink can be moved if pushed by finger, is this normal? Can you check if it's moving for you too, this is a damage in my motherboard,please. I'm freaking out
Hello! Don't worry, mine actually has a little bit of give as well. It can be moved slightly if I push it forward or back. I know it feels loose, but the heatsink is still making contact with the right components and will keep them cool. Also, the power draw on this board is low enough that only minimal cooling is required for the VRMs and MOSFET, so you should be okay.
If you are very concerned about it, you may actually be able to tighten the screws down for the heatsink, which should be accessible on the back of the motherboard. Just be sure not to overtighten. I'm sure you could reach out to ASRock as well, but to me it doesn't seem like a major issue. I stress-tested my board and even at 100% CPU load, I was only getting around 48C max temp on the VRMs and MOSFET, which is very cool and well below any concerningly high temps.
Not the best, no where near the best. and tack off the dumb hat. Now without the hat and calling it the best you would of hade a subscriber. but now I know all your opinions are bias and opinion and not facts.
I'm sorry you don't like my hat, but you can't deny that for the money this is one of the most feature packed value B650 m-ATX motherboards you can buy. Which is exactly the market ASRock seeks to occupy. Nothing bias about looking at the spec sheet. Also... Go Birds!
@@SamWhyze Asrock has the absolute worse customer support out of all the competitors so no. If you're going to hide behind price than any motherboard from aliexpress, TEMU or Sheen will do. Its the same as every other motherboard at that price right now. For the price the msi pro a620 is $75. Overall a good unboxing but calling it the best is the same as calling Philadelphia Eagles the best, nope that's a bold face lie and bias. its your favorite because its yours it's not the best. on here stick to facts. No favoritism, politics or personal opinions. Have you seen any other videos? Take notes any channel that show any of those 3 like you have with this video do poorly you alienate most of your viewers or in your case potential viewers. But good luck if you continue it was very informative.
Well fair feedback man and I do actually appreciate your response. I'll take it to heart and hope to earn your view on the next video. Thanks.
@@doriansanchez1961 At least he (most likely) knows the difference between tack and take, worse and worst, than and then, and Sheen and Shein