I don't know what I'm basically saying due to my language skills, but I think it's great that the throttle is so gentle.For me, the quad gets faster and faster.
Pretty much. If you blip the throttle enough, you can sometimes hide propwash a bit. It also helps if you have a lighter quad and decent tune ofcourse.
Dude I love your tutorials, you explain things in a way that's easy to understand. So, in the next one, can you explain how guys like you, Georgefpv, Fabian, etc, catch the quad and seem to freeze the frame? I can do it sometimes, but it's very difficult and hard to repeat. I hope that makes sense, it's hard to explain. I can find you an example. Anyways, thanks for putting these out, you been helping me find my style for a long time. 🤜🤛
@@JosueFPV so it's in this video @31, and again @308. It's like time freezes. There are many times that it happens with "juicy" style. George probably does it the most, and a lot of times it's right before the forward flick out of a juicy flick. ruclips.net/video/qgXFOPvbK6M/видео.html
@@AerRider not exactly, but a rewind will produce that effect alot. George will get inverted and time just stops. It's awesome. It's just catching the quad at the right time.
@@JosueFPV 🤔i have only seen the 4943. Is that the one? I would assume those are like the johnny props but with more grip and thrust by the numbers but, ill wait.
@@paulfrmn1 Yea the 4943. I actually just got them right now. Might fly them tomorrow. My hope is that I get similar smoothness but more efficiency than the johnny props and I'll be happy. A little extra bite might be nice too.
I like your tutorials, thanks, i would like to know how you wiring your hobbywing esc 60A to your revoltosd? it's my next setup on my astroX J5, thanks if you have a picture on your Facebook for example, have you put anothers capacitors with the original cap on hobbywing esc? Thanks for your answer
Connecting the HW esc is simple. On the connector, I just have the motor wires, power, ground and current wire. Everything else was removed from the connector. I use a 1000uf Panasonic capacitor that is connected to the esc with motor wires. www.dropbox.com/s/4ybocg0q59w258a/IMG_0015.jpg?dl=0 Hope this helps.
@@antadroneur8370 Not entirely sure what you are asking. That's just the way it's suppose to be connected in order to function correctly with F1. You will also need to turn off "Blheli telemetry" in the FW.
Gavin Lee You can convert them to betaflight rates at flightone.com/rates/ Then find a way to convert those to kiss. That is probably the only way to do it. It might not be exact but will get you close.
"You dont need to be full throttle, mr. steel style, for very single thing"😂👍 True
This is exactly the type of advice I’ve been looking for lately. TYVM
Great practice sujeción. 👍🏾👍🏾👍🏾
Been awhile since you made the vid, but I just started juicy training a few months ago. Your vid has helped a bunch!
This is exactly that I needed. Thank you.
2022 and it's so helpful, thanks man
Nice tips very helpful thanks
Keep the Juice flowing! would love to see some juicy trick list tutorial
and how to transition different ways. feel like i do the same thing all the time
Joose! 🌟subbed🆙
Thank you so much, I’ll keep learning from your tutorials 🙏🍻
Please do more like this! Looking for juice tutorials all the time 👌
dope its kinda like bunny hopping around... While blending the throttle to smooth it out?
Yea kind of. Mostly just small throttle blips while keeping pitch, roll and yaw smooth and independent.
super nice man wht about your tuning? thanks a lot for sharing
Nice one of the best 👌
Nice!what about the giant mushroom tower in the background? 😮! Fly that!
Such a valuable teaching. Thank you!
I don't know what I'm basically saying due to my language skills, but I think it's great that the throttle is so gentle.For me, the quad gets faster and faster.
Solid info.
This is such a great video!!!! I've learned so much!!! Thanks bro!
Appreciate this tip! I’m really having issues blipping throttle way too much and I end up I. The clouds. Gotta put this into practice ASAP!!
Thank you Josue! Keep up the great content. Learning so much from your tutes!
Nice tutorial Bro👍👍👍
Very good tips!!!
Chris Quad FPV was Here 👍🧩 I even subscribed.
Muy intuitivo. Muchas gracias por las explicaciones, son muy importantes para los seguidores de estos estilos de vuelo.
How do you catch the quad without any propwash? like on 2:10?? just blip the throttle?
Pretty much. If you blip the throttle enough, you can sometimes hide propwash a bit. It also helps if you have a lighter quad and decent tune ofcourse.
@@JosueFPV waaaahhh.. that's the problem noob with tuning but will try to practice that blip thing. lol. i also have a heavy 6s build around 750g-ish.
Great tips!! New sub!
Dude I love your tutorials, you explain things in a way that's easy to understand. So, in the next one, can you explain how guys like you, Georgefpv, Fabian, etc, catch the quad and seem to freeze the frame? I can do it sometimes, but it's very difficult and hard to repeat. I hope that makes sense, it's hard to explain. I can find you an example. Anyways, thanks for putting these out, you been helping me find my style for a long time. 🤜🤛
hmm, yea send me a video and time stamp so I can better understand what you are talking about.
@@JosueFPV so it's in this video @31, and again @308. It's like time freezes. There are many times that it happens with "juicy" style. George probably does it the most, and a lot of times it's right before the forward flick out of a juicy flick. ruclips.net/video/qgXFOPvbK6M/видео.html
@@Mikebfpv So, a rewind?
@@AerRider not exactly, but a rewind will produce that effect alot. George will get inverted and time just stops. It's awesome. It's just catching the quad at the right time.
blipfam!
Thank you! Great video and I subbed!
Really nice video. What do you use the timer for?
The timer is used so that I know when to land. Sometimes I forget to look at the OSD so it’s nice to get an audio alarm.
@@JosueFPV thanks for the reply
🤔I just figured something like that out last week with the blips..now you gave me an idea to practice. Btw, love the Azure Vanover props on 6s 😎
Paul F. Nice. I just ordered some Blackbird fpv props. I think those will work well on 6s too. I might do a review video once i get them in.
@@JosueFPV 🤔i have only seen the 4943. Is that the one? I would assume those are like the johnny props but with more grip and thrust by the numbers but, ill wait.
@@paulfrmn1 Yea the 4943. I actually just got them right now. Might fly them tomorrow. My hope is that I get similar smoothness but more efficiency than the johnny props and I'll be happy. A little extra bite might be nice too.
@@DiademStudios9 yea i hope so! For now i use the 5145vanover and the hurricane 51466 since they are similar in how the fly. Need more options. 🙄
@@DiademStudios9 i just tried the fourplay props in 4s and they are really good! You should do a review on those.
I like your tutorials, thanks, i would like to know how you wiring your hobbywing esc 60A to your revoltosd? it's my next setup on my astroX J5, thanks if you have a picture on your Facebook for example, have you put anothers capacitors with the original cap on hobbywing esc? Thanks for your answer
Connecting the HW esc is simple. On the connector, I just have the motor wires, power, ground and current wire. Everything else was removed from the connector.
I use a 1000uf Panasonic capacitor that is connected to the esc with motor wires. www.dropbox.com/s/4ybocg0q59w258a/IMG_0015.jpg?dl=0
Hope this helps.
Josue FPV thanks a lot Josue you are soldered tx6/current on revoltosd ? because hobbywing esc have only 1 current sensor not 4
@@antadroneur8370 Not entirely sure what you are asking. That's just the way it's suppose to be connected in order to function correctly with F1. You will also need to turn off "Blheli telemetry" in the FW.
Do you use throttle curves, man? Also trying to figure out how to convert your rates to kiss haha
Gavin Lee nope. I don’t use throttle curves.
Josue FPV thanks for the reply, man! Any ideas on how to convert these rates to Kiss? 😅
Gavin Lee You can convert them to betaflight rates at flightone.com/rates/
Then find a way to convert those to kiss. That is probably the only way to do it. It might not be exact but will get you close.
Josue FPV such a legend! Thanks man!!!
For anyone else wanting these rates on Kiss, here goes 😊
2.54/ 0.47/ 0.56
2.68/ 0.44/ 0.55
2.36/ 0.46/ 0.57
Nice one Josue!