Great work @ Prostar technical You are right regarding offline or online inverter type but that does not determine if an inverter is pure sinewave or not. For clarity purpose, we have different categories of inverter namely: 1. By wave type. 2. By Off-grid/on-grid. 3. Offline or Online type. 4. Transformer type or Transformer less (SMPS) Type. 5. High frequencies or low frequencies type. 6. normal inverter or Hybrid inverter. 1. wave type, we have three different type namely: a. Square wave inverter. b. Modified sine wave inverter. 3. Pure sine wave inverter which is the best for efficiency and performance. Like the one he displayed is actually modified sine wave inverter. 2. On-grid type, this is type of inverter that you can use during the day and transfer all the unused power to your Grid and be compensated by local power utility company. while off-grid type is the opposite i.e you can transfer excess power to the grid. 3. Offline type, it can only be used by converting DC to AC only while online type can convert DC to AC as well as being connected to the grid to use the power from the grid when there is power supply and switched to the conversion of DC to AC only when there is no power from the grid. 4. Transformer type is the type that are very Bucky i.e. i mean very heavy due to the power transformer inside while the SMPS is called Transformer less but in real sense it has small in built transformer (fly back transformer, line output transformers or coupled inductors) popularly called choke transformer, 5, High frequencies type is the SMPS type of inverter that convert small frequencies of signal to a high frequencies of 25khz to 100+khz of pulse width modified wave, which will later be converted to the normal 50hz 220v pure sine wave inverter with the aid of filtering circuits. while the low frequencies type are the one that uses Bucky Power transformer in it design ...... 6. Normal inverter type is the one that just convert either solar with charge controller to AC power or Battery to AC power while the Hybrid type is the one that combined all the sources together to achieve the same objective uninterrupted power supply i.e it combine power from Grid + Battery + Solar (in-built charge controller) to give constant power either from Grid, Battery or Solar energy. i hope this short NOTE pass some information across. Thank you
This is a great explanation.we need more contributions from you. Pls 🙏 and thanks. Am going to upload a video on how to fix and treat your batteries I will also need your contribution. Thanks
That charge controller is a bad boy. One of the most reliable cheap pwm Chinese controller. I have been using it for years on my small system the past 5-6yrs and still going strong.
If a pmw solar controller is well installed, with good parallel connections from solar panel, so that the volatile is just above the battery charging voltage, it would work fine.
Thanks sir you videos have been helpful please how many mm cable do I need to connect two 12v 220ah tubular battery in series and how many mm cable do I also need to connect it to a 60ah charge controller
Hello 300watt panel are 24v while the 190v are 12v..there, you meed to connect the 190v on serious and parallet them with the 300watt panel...problem will be solved
@@michaelchane2593 yes that is other solutions. Note in series voltage increase while the panel wattage remain constant and is using pwm controller. Which means the controller will be seeing 190watt against 300watt.
Yes you are right , I understand your explanation, pwm controller will be seeing the 189watt panel first. It Will work but it will limit what the solar panel will generate.
very correct.... MPPT also does a true power conversion i.e the initial power entering it from the panels will be approximately equal to the power leaving the controller to charge the batteries. PWM controllers waste more of the energy.
Thanks for this post. I have less than 3 weeks to plan, calculate and deliver a solar system for the first time. No training. How bad is it to use 12v car batteries ? I'm on a tight budget and car batteries are easily accessible. what are the disadvantages? What do i need to connect both wind turbine and solar panels together to charge same power bank/batteries?
Please show how you wired panels in series parallel using splitter connections once you removed from the roof. As that would have made it a more educational and enjoyable video. Keep up the good work.
Weldone you're a great instructor but please work on your sound. The voicing is low and there is a bit of noise. That's my little observation but kudos to you sir
I think those panels should be connected in series to increase the volts and joined to the others in parallel to increase the amps for better charging. I am not a solar guy, just an enthusiastic user
@@Prostartechnical nice job well done but wire are two small i see but few power station i will never used those type wire on battery i used wire from 3/0 gauge 200A, 1/0 gauge 150A ,3 Gauge 100A wire get over heated i did see no fused on battery i have 1500 Watts inverter i have fused between my red wire and red wire going battery
3/0 gauge 200Amp 1/0 gauge 150Amp 3 gauge 100Amp wire get over heated not have right gause wire need fused on red wire between inverter and battery ok if not have right wire times get volt drip I have power station build have decyle battery 75Amp and going get lithium battery
I like your caption, I'm sure the 300watts panels were connected in parallel afterward, doing so in series would not be as productive, for since it is a PWM controller you need more current to power the system effectively and charge the batteries efficiently @voltraenergy
Quality of audio is bad. The explanation is not flowing. Do you mean 22 V or 220 V panel? Try and compose yourself very well next time because the world is watching you. Despite that, you have tried. Well done
Great work @ Prostar technical
You are right regarding offline or online inverter type but that does not determine if an inverter is pure sinewave or not. For clarity purpose, we have different categories of inverter namely: 1. By wave type. 2. By Off-grid/on-grid. 3. Offline or Online type. 4. Transformer type or Transformer less (SMPS) Type. 5. High frequencies or low frequencies type. 6. normal inverter or Hybrid inverter.
1. wave type, we have three different type namely: a. Square wave inverter. b. Modified sine wave inverter. 3. Pure sine wave inverter which is the best for efficiency and performance. Like the one he displayed is actually modified sine wave inverter.
2. On-grid type, this is type of inverter that you can use during the day and transfer all the unused power to your Grid and be compensated by local power utility company. while off-grid type is the opposite i.e you can transfer excess power to the grid.
3. Offline type, it can only be used by converting DC to AC only while online type can convert DC to AC as well as being connected to the grid to use the power from the grid when there is power supply and switched to the conversion of DC to AC only when there is no power from the grid.
4. Transformer type is the type that are very Bucky i.e. i mean very heavy due to the power transformer inside while the SMPS is called Transformer less but in real sense it has small in built transformer (fly back transformer, line output transformers or coupled inductors) popularly called choke transformer,
5, High frequencies type is the SMPS type of inverter that convert small frequencies of signal to a high frequencies of 25khz to 100+khz of pulse width modified wave, which will later be converted to the normal 50hz 220v pure sine wave inverter with the aid of filtering circuits. while the low frequencies type are the one that uses Bucky Power transformer in it design ......
6. Normal inverter type is the one that just convert either solar with charge controller to AC power or Battery to AC power while the Hybrid type is the one that combined all the sources together to achieve the same objective uninterrupted power supply i.e it combine power from Grid + Battery + Solar (in-built charge controller) to give constant power either from Grid, Battery or Solar energy.
i hope this short NOTE pass some information across. Thank you
This is a great explanation.we need more contributions from you. Pls 🙏 and thanks. Am going to upload a video on how to fix and treat your batteries I will also need your contribution. Thanks
That charge controller is a bad boy. One of the most reliable cheap pwm Chinese controller. I have been using it for years on my small system the past 5-6yrs and still going strong.
If a pmw solar controller is well installed, with good parallel connections from solar panel, so that the volatile is just above the battery charging voltage, it would work fine.
@seunsonoiki6979 That is while you need to calculate before installation
What type of battery are you using, please? Or have you changed the batteries during these 5 years?
@oluwoleodetola1626 battery depends on the cost , standard battery luminous, Genus etc I mean for tubular battery
Thanks sir you videos have been helpful please how many mm cable do I need to connect two 12v 220ah tubular battery in series and how many mm cable do I also need to connect it to a 60ah charge controller
From panel to controller 10mm standard, for battery 16mm minimum, or you double 10mm cable . Thanks
Hello 300watt panel are 24v while the 190v are 12v..there, you meed to connect the 190v on serious and parallet them with the 300watt panel...problem will be solved
@@michaelchane2593 yes that is other solutions. Note in series voltage increase while the panel wattage remain constant and is using pwm controller. Which means the controller will be seeing 190watt against 300watt.
@@Prostartechnical No in series, the amp remain constant while the volateg increase....the wattage is determine by the total number of panel there
Yes you are right , I understand your explanation, pwm controller will be seeing the 189watt panel first. It Will work but it will limit what the solar panel will generate.
There is nothing like a 300w panel is 24v and 190w are 12v…u talking chicken food 😂 there is a 375w 12v panel
@@EDSG-d8w i will not say much, you are still right...am looking at d voc
I love this easy and straight forward, take this❤❤❤❤❤
Thanks for your contribution
He needs an MPPT charge controller with large VOC so he can connect the whole solar panels in series as they are of different voltages and wattages.
@@xlgoldfish thanks for your contribution
very correct.... MPPT also does a true power conversion i.e the initial power entering it from the panels will be approximately equal to the power leaving the controller to charge the batteries. PWM controllers waste more of the energy.
Thanks for this post. I have less than 3 weeks to plan, calculate and deliver a solar system for the first time. No training.
How bad is it to use 12v car batteries ? I'm on a tight budget and car batteries are easily accessible. what are the disadvantages?
What do i need to connect both wind turbine and solar panels together to charge same power bank/batteries?
Pls call us on +2348160449736. Is free , don't fail to call
what make of car batteries
@@rootsdubz don't use car battery is not made for inverter and wind installation .
Please show how you wired panels in series parallel using splitter connections once you removed from the roof. As that would have made it a more educational and enjoyable video. Keep up the good work.
I will ,thanks for your contribution
very nice but wire I see is small ok I know about wire size not have right it get over heated
what gauge wire you have from inverter to battery may I asked wire look small to me brother
Never mix panels of different voltage, current and wattage
You'll be okay once you know what you're doing
You can mix panels of the same voltage if it's in parallel.
@emmanuelfestus3007 thanks Emmanuel for your contribution. Our next video is how to fix tall tubular battery
Bom dia meu amigo ja tive um desse aí foi uns dos primeiros que eu comprei
Weldone you're a great instructor but please work on your sound. The voicing is low and there is a bit of noise. That's my little observation but kudos to you sir
Thanks, I will do so
That Mercury Inverter is 2.4KVA 24V.
@@ocheadoga303 1.6kva 24volt
Great stuff my broda , you know your thing
Thanks everyone, we need everyone's contribution on this channel.
I think those panels should be connected in series to increase the volts and joined to the others in parallel to increase the amps for better charging. I am not a solar guy, just an enthusiastic user
Depends on the controller you are using
For the pwn its a no-no. You're better off taking it out.
ir will never work well bcos d small panel will drag d big panel wattage down.wat u are solving is d voltage but dat will drag d wattage down
Always give prices from price of each item and labor
@@ibiyemifabanwo9201 noted
@@Prostartechnical ijebu installation?
Good day sir I love ❤️ ur teaching and ur tectonic pls ur location sir but am in abuja sir, uare doing great
Good day @Victor . I base in Port Harcourt. Our team is in Lagos and Abuja for any technical troubleshooting(Abuja no 09053179912 Prostar technical)
Is name is Mr Victor
Good video, please can you do video on how to connect inverter from knife changeover to Distribution Board and also how to do seperation of load
Noted
Na electrician work be that if u wan learn come pay money make I teach you
wire look small to me ok nees good wire 3/0 gauge wire 200Amp 1/0 gauge 150Anp
Noted
Well done sir. But why the battery mixmatch? Technically is not advisable.
Yes, you are right. That is what the client have. Although they are both 12volt 220ah battery
@@Prostartechnical nice job well done but wire are two small i see but few power station i will never used those type wire on battery i used wire from 3/0 gauge 200A, 1/0 gauge 150A ,3 Gauge 100A wire get over heated i did see no fused on battery i have 1500 Watts inverter i have fused between my red wire and red wire going battery
@@ogungbebabatunde1289 that was what I saw in the client house
Nice but pls next capture how the panel was connected and disconnected.
Thank you
Note: the panel was connected in parallel both the 190watt pane and the 300watt panel
Pls sir,make a video on how to chose SPDS
Noted
Please use saperate microphone or voice recorder close to your mouth. Hope you will improve the voice quality. Viwer from Pakistan
Thanks, I have gotten one. Our next video is going to be how to treat and fix your battery your self
Where can I get your help, I have 2 battriess of 200am each with 5 panels different wats but , what annoy me they can’t turn on Tv for whole day. 😊
@@cosmas1565 pls your location. We visit and advice
@@Prostartechnical any branch offices in uganda
@cosmas1565 no branch office in Uganda. Any questions or help , Write us for assistance . Thanks 🙏
what kind battery you have deep cycle battery I have power station I build need right gauge wire 😊😊
@@cosmas1565 your location pls, it mean there is fault on the installation or battery is fauli
This inverter is not offline inverter but modified sine wave inverter
There is the error of mixing battery types too.
@@ndukaakpati yes, although you are right. They are both 220 12volt tubular battery. But different company
Cann"t one use solar system without battery and inverter first
Yes is possible , that should be day time load only and depends of the nos of solar panel and controller
3/0 gauge 200Amp 1/0 gauge 150Amp 3 gauge 100Amp wire get over heated not have right gause wire need fused on red wire between inverter and battery ok if not have right wire times get volt drip I have power station build have decyle battery 75Amp and going get lithium battery
sir good job bt sound it very low try to rasing your speaker lound thnks
Thanks 🙏 for your contribution
@@Abuassma360 thanks, noted
I like your caption, I'm sure the 300watts panels were connected in parallel afterward, doing so in series would not be as productive, for since it is a PWM controller you need more current to power the system effectively and charge the batteries efficiently @voltraenergy
That 190w panel should never be connected to a 300w panel whether series or parallel
Yes , thanks for your contribution
d lower panel will always drag d bigger one down.to use different panel.use different charge controller
I agree with you.
@@realToby thanks John for your technical contribution
Wow just saw you’re in port harcourt, will contact you soon
Thanks
What is make of the metre you are using ?
Unit is the name of the meter, it has both DC and AC clamps
I love the meter
Weldon bro
Quality of audio is bad. The explanation is not flowing. Do you mean 22 V or 220 V panel? Try and compose yourself very well next time because the world is watching you. Despite that, you have tried. Well done
Bros you try, na only that meter enter my eye, please how much is it?
130,000 naira
Jesus ooooo @@Prostartechnical
Baba go and len work
Well said
Thanks
cant hear you, man
Thanks for your contribution, noted
God bless you brother..how can I have your number
👏🏽👏🏽👏🏽👏🏽🇿🇲