Superb simple to understand instructional and so refreshing that unlike most of these films (normally American) you got straight to the point rather than trying to sell us the stuff your using Excellent
Excellent presentation, Only suggest is to make it clear from the start . If connecting a battery, always connect the battery to the controller before connecting the PV array to the controller so in your example disconnect the PV array, connect the battery then the PV array.
Thank you so much. I kind of understand it by myself when I try to teach myself on my own, but with this video it confirms my understanding and gives me more confidence. Bravo 👏
You have explained very simple and well. Thank you. Now, I need to know something about controlling the battery to not discharge fully and get spoilt/damage.
Well explained. I did connection myself but I haven't added the protective surg yet which I will do for me to get qualified 😅 kudos man for you wonderful teaching. Form Nigeria ❤
When assembling a solar power system, it is important to note, that the Solar panel is the last thing to be connected to the solar control unit, connecting the solar panel to the control unit first will damage the unit. the battery should be connected first, followed by the solar panel, always connect negative wire first and the last wire to be connected should be the solar panel positive wire. Unfortunately this is not explained in this video. Speaking from experience.
I like your analysis. It shows you have a great experience in Solar connection. Please, what value of the MCB should I use for 2 300watts panels and 60 amp charge controller? I will appreciate your response.
I was going to say the same. I'm not an expert, but I have seen other videos and they always say what you wrote. On the comments a lot of people also wrote that it can damage the controller.
thanks for your magnificent presentation . what to do if i need to install solar system in my entire home ,using solar systems to everything in my home instead of electricity?
Hi Very good explanation. I have some questions and make discussion among the group here. 1. For surge protection device, can it install after the MCB ? What will be Pro and Con then? 2. Some country, there is not ready earthing connection at home. So, those home usually use RCCB instead of earthing for protection. For these home, installation of surge protection device maybe impossible as it will not be working at all without installing earthing cable. So, can we use RCCB here instead of surge protection device please ? Thanks to all.
You have made a mistake. You have to connect the battery to the charge controller before you connect the solar to the charge controller. If you dont do this you destroy the charge controller.
Can you do a teardown video of a RevoPower Rebel? I've been using my rebel for 3 years and it's survived 2 hurricanes!!!! It kept my wife and daughters safe and comfortable at home during the last storm, want to see your thoughts now!
That'll be from your inverter mains to your distribution board. Depending on what you want connected, you can just attach to your change over switch or detach specific items you want on your solar power constantly from the distribution and NEPA mains
I would put MCB between the battery and inverter to prevent current surge and to protect the battery. That is where fire usually starts if there is overload.
Thanks for video 👍🙂 Why did you not wire the battery to the (solar charge controller) as the very first thing to do?? Thought is was important that battery was connected like the first thing to do ??:-)
You also need a dc breaker between the battery bank and the inverter and you need to apply electricity security rules between the inverter and the house !
Don't forget a fuse from battery positive in case there is a short circuit in the battery leads to the inverter, and perhaps a disconnect switch off the positive too.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Superb simple to understand instructional and so refreshing that unlike most of these films (normally American) you got straight to the point rather than trying to sell us the stuff your using
Excellent
Thank you for a very clear teaching with also very simple English an illustration 🇿🇼👌
what a wonderful explanation and well presented graphics! Many thanks Electrical Guy 😁🙏
Thanks alot, Indians are so good in educating others
those guys are doing it all in a second language which is phenomenal.
This was a great video. you dumbed it down to assist someone like myself who is a newbie to Solar power connections. thank you!
Super Excellent Tutorial. A Big Salute and Thanks for not playing Horrible Background Music
💕💕💕💕💕💕🚙🚙
Excellent presentation, Only suggest is to make it clear from the start . If connecting a battery, always connect the battery to the controller before connecting the PV array to the controller so in your example disconnect the PV array, connect the battery then the PV array.
the biggest mistake anyone can make always battery first or you fry the controller.
what a pv
Impressive, very straightforward. I have learnt something I would have naturally paid to study. With this, I will build my home solar solution myself.
Thank you very much from saudi Arabia 🇸🇦 ❤💐💐💐 you the best
This is very clear n simple.
Always connect Battery to charge controller first then PV.
What is PV?
@@dannylarezahe meant to say Solar Panel Volt
Thank you you make it so simple to understand it good job
Велике спасибі з України! Нам це зараз дуже необхідно і важливо ! Many thanks from Ukraine! It is very necessary and important for us now!
Very good, simply explained video. Thank you.
Thanks!
Thank you for the first thanks of my Channel 🙏😍
Thank you very much from Guinea 🇬🇳 ❤you the best
Wow
This is amazing and well explained, watching from Nigeria
With this teaching, i feel like I can install it on my own
Good morning, thanks for sharing
Regards
Jean-François
Exellent description. 🤔 I understand now much better what I will be watching being done by the "The ElectricalGuy (or Gal)" I hire to do the job.😉
Awsome, explained very well😊
Very nice. It's very simple and clear explanation.
Good
you very much in saudi arabia 🇸🇦. Great ❤
Very nice presented.
Thank you so much. I kind of understand it by myself when I try to teach myself on my own, but with this video it confirms my understanding and gives me more confidence. Bravo 👏
Thanks you alot for sharing your skills and knowledge
Highly explanatory, thanks
You have explained very simple and well. Thank you. Now, I need to know something about controlling the battery to not discharge fully and get spoilt/damage.
Smart teaching solar peniel systems
PV ground bracket +Easy and fast installation without punch holes. Match 980mm-1134mm width solar module.
thank you nice india accent. now i can build solar system
Excellent video. Thank you!!!
This is very educative
Super best guide lots of thanks
Superb nice way to explain.....
Very successful video indeed.
lam really like the way explaining to us. thanks
Beautiful explanation, thank you !
I love your simplicity
Well explained. I did connection myself but I haven't added the protective surg yet which I will do for me to get qualified 😅 kudos man for you wonderful teaching. Form Nigeria ❤
When assembling a solar power system, it is important to note, that the Solar panel is the last thing to be connected to the solar control unit,
connecting the solar panel to the control unit first will damage the unit. the battery should be connected first, followed by the solar panel, always connect negative wire first and the last wire to be connected should be the solar panel positive wire. Unfortunately this is not explained in this video.
Speaking from experience.
This is true.
I like your analysis. It shows you have a great experience in Solar connection. Please, what value of the MCB should I use for 2 300watts panels and 60 amp charge controller? I will appreciate your response.
Why connect negative before positive? Current flows through the negative, right?
I was going to say the same. I'm not an expert, but I have seen other videos and they always say what you wrote. On the comments a lot of people also wrote that it can damage the controller.
Good video. 👍
Simple and straightforward
Super explanations, very useful information, thanks a lot
Simple and explanatory diagram
This is so educative
Complete Solar Panel Connection with Solar Charge Controller and Inverter @TheElectricalGuy
I need your help where can get service.
Thanks. That was useful.
Superb .
.
Very detailed video. Thanks. Subscribed 😊
Great just nice and easy to follow. Thanks for a well demonstrated video
great 👍
Useful video
Really amazing watching from Dubai 🎉🎉 after watching this any one can do it thanks again 🎉🎉
thanks for your magnificent presentation . what to do if i need to install solar system in my entire home ,using solar systems to everything in my home instead of electricity?
Hi Very good explanation.
I have some questions and make discussion among the group here.
1. For surge protection device, can it install after the MCB ? What will be Pro and Con then?
2. Some country, there is not ready earthing connection at home. So, those home usually use RCCB instead of earthing for protection. For these home, installation of surge protection device maybe impossible as it will not be working at all without installing earthing cable. So, can we use RCCB here instead of surge protection device please ?
Thanks to all.
Very nice!
Is there a specific length of the surge protection earthing lead length ?. Love your explanation.
Thank you man
Explained very well thank you.
Thank God I came across this channel I was starting to give up
Thnkc for sharing
You earned a like.
Well articulated thanks
Watching from Vanuatu. Thanks so much for the very clear instructions
clear explanation. thank you
This is the best explanation.
❤ from Australia.. love your work MR ✌️ 😊
You have made a mistake. You have to connect the battery to the charge controller before you connect the solar to the charge controller. If you dont do this you destroy the charge controller.
Thanks a lot
Well put together and explained. Colorful choice of wording. Awesome accent. +1
thanks Explanation
thank you excelent video
Best tutorial.
I believe that's a DC surge protective device so can we connect our house AC earth wire from DB to the DC surge protector?
Can you do a teardown video of a RevoPower Rebel? I've been using my rebel for 3 years and it's survived 2 hurricanes!!!! It kept my wife and daughters safe and comfortable at home during the last storm, want to see your thoughts now!
God's grace is sufficient🙏😤
Easy to gollow..gosh thank you
Thanks for the video. What value of MCB can one use to connect 600 watts panel and 60amp Charge Controller? I will appreciate your response.
youre a genius man
Good info
Awesomeness
Hello.does solar controller stop when battery is full? Or we need an extra device for that?
Good question! And my own question: does MPPT charger have ALL MODES to charge ALL TYPES of batteries??
Super nice
Thank you so much from Nigeria 🇳🇬 but I need a video of how u can connect this whole proceess with electrical distribution board
That'll be from your inverter mains to your distribution board. Depending on what you want connected, you can just attach to your change over switch or detach specific items you want on your solar power constantly from the distribution and NEPA mains
Nice idea very good
Good explanation
I would put MCB between the battery and inverter to prevent current surge and to protect the battery. That is where fire usually starts if there is overload.
Thanks for video 👍🙂
Why did you not wire the battery to the (solar charge controller) as the very first thing to do??
Thought is was important that battery was connected like the first thing to do ??:-)
You also need a dc breaker between the battery bank and the inverter and you need to apply electricity security rules between the inverter and the house !
bhai ye invertor se direct ghr kaa meter mai lagaa kaa bulb mbl chrg kar sakte hai kyaa plz bataaiye
Don't forget a fuse from battery positive in case there is a short circuit in the battery leads to the inverter, and perhaps a disconnect switch off the positive too.
Good explanation 😂🎉
So smart
You're the best teacher 🎉
Ecellent
Good video. Please is the solar cable the same one cable that acts as the “load” cable to carry the energy from the panel to the Inverter/battery?
Thank you
Awesome
Thanks very much 👍 Please i have a 250w single solar panel (37v)15amp... 30a charge controller... can i know which dc breaker to choose 🤔 please?
Thanks for nice video