What can you say man. The guy is a badass. I built several things that he's made and if you follow his instructions you'll get good results. Bravo Mr numa vig
What a pleasure to see you progress over the years. Since you invested in those cutting machines, your plane become quite sophisticated. And always so lightweight.
Your videos are always relaxing to watch. I can feel the passion through the screen, the dedication you put making those airplanes from scratch is a sight to see. And everytime i'd watch your vids it always amazed me, it so intricate. Keep it up
This is the stuff I miss about the hobby! At this point, you could 3d print your ribs, and many other parts. Laser printing, bang out a new plane each week! :) All that work, was wishing you used monocoat. Foam is cheap though. Beautiful work!
Sorry, but printing airplane parts in 3D doesn't have much to do with model making for me. I know the younger generation does it that way - but it's still not pretty. I learned to build model airplanes 35 years ago, mainly out of wood.
As I was watching this it was making my back and chest twinge , you may be wondering why an RC model build would do this , well the answer is simple, I spent a good solid day jammed right up the tail end of a full size PA28 Cherokee (Dakota to be precise) changing autopilot servos and the ribs in the aircraft were digging into me in many places and accessing said location was like a cross between negotiating a military barbed wire training course and performing 500 sit ups non stop and seeing the fuselage you were building made my muscles go " no not again " 😖... just kidding it wasn't that bad but watching your build here is pretty much faithfully reproducing the real thing in miniature, you have amazing skills. When I'm not working on full size aircraft I also like building and fying rc models and one day I might give this one a go Cheers
All your constructions are wonderful. Watching your videos is a pleasure, they are classes with many teachings. Thank you for sharing your knowledge with us. Good landings. Fraternal hugs from Brazil. Todas suas construções são maravilhosas. Assistir seus vídeos é prazeroso, são aulas com muitos ensinamentos. Obrigado por compartilhar seus conhecimentos conosco. Bons pousos. Abraços Fraternos do Brasil.
Great video. Building with XPS or similar materials has some advantages (e.g. resistance to damage). For many, the low weight is also an advantage. But building something so light has disadvantages in my opinion. The lower wing loading has a negative effect on the flight pattern and, in stronger winds, on the flight behavior. You can see that at 48:36. I fly a Parkzone Mustang, among others, which weighs an impressive 780 grams with a wingspan of 98 centimeters. Compared to my Easystar 2 (140 centimeters, 900 grams), the Mustang has significantly better flight behavior thanks to its higher wing loading and is also much more fun. My suggestion would be to first coat your Piper with parquet varnish and then paint it with acrylic varnish. That would improve the look of your model, it would be less susceptible to damage and, above all, a higher wing loading would improve the flight behavior and "flight pattern". Otherwise, their construction is very clean and well thought out - simply great!
NumaVIG love the planes so far, but would you consider making a fighter jet? Or have you already started one? I'd specifically love to see you make an F-22 Raptor.
Hello, how are you? First of all, I would like to congratulate you on the extraordinary work you do in building the AIRPLANE Piper Cherokee model. I am writing to you from Guadalajara, Mexico, and I have not seen the foam products that you use. I have not been able to find them here in Guadalajara. I am asking you what the name of the two foam products that you use to build these beauties is, both in the structure and in the fuselage skin and wing groups. Thank you very much and best regards.
For viewers in the US, what kind of foam board are you using? Closest I can find is the dollar tree foam board, but it doesn't work well for any kind of complex shape...
@@NumaVIG ну так пожалуйста поясните. Я не совсем понимаю о каких к в частности различиях идёт речь. Так же хотелось бы узнать насколько лучше эти моторы в сравнении с теми же SunnySky.. по тяге или потреблению тока?
по ссылке к описанию на этот самолет на ваш сайт, прикреплены ссылки на комплектующие., а именно на мотор T-MOTOR AM40. По этой ссылке цена аж в 2,5 раза больше чем в других магазтнах. ПРОСТИТЕ, но НАХРЕНА ТАКОЕ ПРИКРЕПЛЯТЬ ?
Кстати у вас там файлы только dxf для лазерной резки но мне нужны файлы исходники чтобы я их сам мог менять под свой размер и размах!! Скиньте пожалуйста мне эти файлы
You always offer all the tips for construction. Congratulations for that too. Você sempre oferece todos as dicas para a construção. Parabéns também por isso.
What can you say man. The guy is a badass. I built several things that he's made and if you follow his instructions you'll get good results. Bravo Mr numa vig
What a pleasure to see you progress over the years. Since you invested in those cutting machines, your plane become quite sophisticated. And always so lightweight.
Lightweight means they will fly realistically.
Очень классно!!! Особенно маленький нож для резки элеронов просто суппер!!! Восхищаюсь вашим талантом!!!
You are at the absolute pinnacle of the craft. Beautiful work.
This is a masterpiece and a challenge to build! Dude you must be a structural aeronautic engineer.
I love your work and never skipped a minute in one of your videos
I also scratch build RC planes. But you have done an amazing job building this thing. Two thumbs up!!
Your videos are always relaxing to watch. I can feel the passion through the screen, the dedication you put making those airplanes from scratch is a sight to see. And everytime i'd watch your vids it always amazed me, it so intricate. Keep it up
Allen Respekt, für diese Fertigung und die Geduld.
Sweet build and excellent motor combo. Always a pleasure to watch you create.
This is the stuff I miss about the hobby! At this point, you could 3d print your ribs, and many other parts. Laser printing, bang out a new plane each week! :) All that work, was wishing you used monocoat. Foam is cheap though. Beautiful work!
Sorry, but printing airplane parts in 3D doesn't have much to do with model making for me. I know the younger generation does it that way - but it's still not pretty. I learned to build model airplanes 35 years ago, mainly out of wood.
3D printing materials much heavier than foam and balsa
@@NumaVIG Is there a special reason why you make your models so light?
@@centavo7714Light model airplanes fly more realistically and they easier to fly. Reynolds.
As I was watching this it was making my back and chest twinge , you may be wondering why an RC model build would do this , well the answer is simple, I spent a good solid day jammed right up the tail end of a full size PA28 Cherokee (Dakota to be precise) changing autopilot servos and the ribs in the aircraft were digging into me in many places and accessing said location was like a cross between negotiating a military barbed wire training course and performing 500 sit ups non stop and seeing the fuselage you were building made my muscles go " no not again " 😖... just kidding it wasn't that bad but watching your build here is pretty much faithfully reproducing the real thing in miniature, you have amazing skills. When I'm not working on full size aircraft I also like building and fying rc models and one day I might give this one a go
Cheers
Отличная технология, для "особых модельщиков-инженеров", в хорошем смысле
All your constructions are wonderful. Watching your videos is a pleasure, they are classes with many teachings.
Thank you for sharing your knowledge with us.
Good landings.
Fraternal hugs from Brazil.
Todas suas construções são maravilhosas. Assistir seus vídeos é prazeroso, são aulas com muitos ensinamentos. Obrigado por compartilhar seus conhecimentos conosco. Bons pousos. Abraços Fraternos do Brasil.
Great video. Building with XPS or similar materials has some advantages (e.g. resistance to damage). For many, the low weight is also an advantage. But building something so light has disadvantages in my opinion. The lower wing loading has a negative effect on the flight pattern and, in stronger winds, on the flight behavior. You can see that at 48:36. I fly a Parkzone Mustang, among others, which weighs an impressive 780 grams with a wingspan of 98 centimeters. Compared to my Easystar 2 (140 centimeters, 900 grams), the Mustang has significantly better flight behavior thanks to its higher wing loading and is also much more fun. My suggestion would be to first coat your Piper with parquet varnish and then paint it with acrylic varnish. That would improve the look of your model, it would be less susceptible to damage and, above all, a higher wing loading would improve the flight behavior and "flight pattern". Otherwise, their construction is very clean and well thought out - simply great!
nice video! .... incredible construction!....model airplane flies with incredible lightness! 👍👍👍👏👏👏👏
What care was given to every detail.
Amazing...
i love your videos and i'm super glad to see you posting again after what seems like forever
Primeiro dou o like, depois vejo o vídeo! 😂
Parabéns pelo seu trabalho!
👏👏👏
Beautiful build!
Świetna robota. Może nakręcisz film jak robisz plany.
Good job!
What about a small edf jet? Like 50mm on 3S/4S? Would love to see you build one!!
hi great work im impressed what blender add-on are u use to unfold model ??
Paper Model
Really Cool 🛩
NumaVIG love the planes so far, but would you consider making a fighter jet? Or have you already started one? I'd specifically love to see you make an F-22 Raptor.
Hello, how are you? First of all, I would like to congratulate you on the extraordinary work you do in building the AIRPLANE Piper Cherokee model. I am writing to you from Guadalajara, Mexico, and I have not seen the foam products that you use. I have not been able to find them here in Guadalajara. I am asking you what the name of the two foam products that you use to build these beauties is, both in the structure and in the fuselage skin and wing groups. Thank you very much and best regards.
www.google.com/search?q=xps+foam
Um Show valeu
Seus aero são top mas quem não tem máquina de corte e nem acesso a balsa aí fica dificil
So amazing
Super Nice Plane...
What Programm disined the Plane??
Blender
Top demais.
For viewers in the US, what kind of foam board are you using? Closest I can find is the dollar tree foam board, but it doesn't work well for any kind of complex shape...
I think it is XPS/depron foam
Fantastic, what program do you use to model the pieces?
Why don't you make a video where you explain the CAD drawing phase?
Blender
Mantap 👍👍👍
...amazing!
Здравствуйте где можно скачать файлы для лазерной резки и 3D файлы исходники?
Nice build just cant srand the sound of that foam
Very nice design, admirable build. Liked. I just wonder why does this Italian guy do shoppings in Russian home depots?
Perché non è italiano ma russo!
nice
В какой программе вы рискуете самолёт это. Я не совсем понял по изображению на экране .
Blender
Please make an airliner (crj 900 for example)
🔥👍
И собственно почему не ставите мотор от SunnySky 2305 к примеру? Чем обусловлен выбор дорогого мотора T-motor?
нет никаких почему, обычное разнообразие, какждый выбирает что ему нравится, если внимательно смотреть что я показываю можно увидеть различия
@@NumaVIG ну так пожалуйста поясните. Я не совсем понимаю о каких к в частности различиях идёт речь. Так же хотелось бы узнать насколько лучше эти моторы в сравнении с теми же SunnySky.. по тяге или потреблению тока?
ruclips.net/user/shortsLrJaftf6A7g
ruclips.net/user/shortsHHLj5oYOKAU
Donde puedo conseguir pegamento titan wild
А в какой программе вы делаете 3d модель?
Blender
по ссылке к описанию на этот самолет на ваш сайт, прикреплены ссылки на комплектующие., а именно на мотор T-MOTOR AM40. По этой ссылке цена аж в 2,5 раза больше чем в других магазтнах. ПРОСТИТЕ, но НАХРЕНА ТАКОЕ ПРИКРЕПЛЯТЬ ?
продавец что то намудрил, не было такой цены, ссылку поменял
Вот теперь другое дело. Спасибо.
Oh I am learning colloquial Russian lol!
next video f16 pls
How can I get your plan without being a patron member?
subscribe/download/unsubscribe
The website is not accessible
your location? www.uptimia.com/website-availability-test/5e0b7b99
Neje 3 plus точно режет фанеру
Здравствуйте можно у вас попросить файлы
Кстати у вас там файлы только dxf для лазерной резки но мне нужны файлы исходники чтобы я их сам мог менять под свой размер и размах!! Скиньте пожалуйста мне эти файлы
в LightBurn все прекрасно масштабируется, кроме DXF есть только SVG
@@NumaVIG я понимаю но ещё я понимаю вы же эти файлы делаете 3D программе вот мне эти файлы и нужны
3D модель не может стоить 7€ (минимум 50) и масштабировать не меняя толщину материалов так просто не получится
You always offer all the tips for construction. Congratulations for that too.
Você sempre oferece todos as dicas para a construção. Parabéns também por isso.
First!!!😁😁