Beautiful restoration, the scales are incredibly tough and flexible acts like delrin, but don’t think the had that material in the 50’s Great presentation also... Keep up the great work!!!
@@FFD_Restorations I've got one in my hand issued to my Lance Coporal dad in 1944, dated on the tin opener, W&S.B Sheffield with the broad arrow so now 79 years old. The only difference is there are rivets and washers instead of the end caps on the scales. It has seen better days but still useful and tough as old boots.
Never seen one of these knives restored, they're so lumpy and tough you can get away with a clean, oil and a sharpen and they'll keep working more often than not. Enjoyed seeing the knife taken apart in all its overbuilt, lumpy glory!! You did a great job of restoring it.
@@garymarlow9612 ni idea, but my dad had one when he was in the Royal Engineers and they were standard issue equipment to troops, wondered myself and been told it goes back to horse and wagon times and was used for ropes and getting stones etc out of horse's hooves
Estupenda restauración, y ciertamente la excelente calidad de los materiales y componentes de esa excelente navaja-multiherramienta, ayudan mucho. Por cierto, una pregunta curiosa: ¿porque no se aprecia en el video cuando las limpias con alguna solución líquida?
Was i the only one hearing a construction site when he sped things up??😂😂 great vids love your channel btw its very unique compared to other restoration channels i find on here
Nice restoration!! I have my great grandfathers jack knife which is dated 1940, it was standard army issue and he would have used it in France and Germany during WW2. It is exactly the same as this but without the marlin spike. I am looking into how I can look after it and clean it up but without access to many tools.
Hey Jack, thank you so much for the comment and checking out my video. That is so cool! If you don't want to disassemble it, use fine sandpaper or wool pad to clean it and make sure to apply some kind of protection. That could be a light coat of oil or what I like to use is beeswax mixed with a bit of oil. Take care!
Do u live near a ship dock or something? I had to listen real close after u said background noise lol. Your next project should be something wood. You should build mr. Woody a girlfriend lol
Lol not that close to dock but my neighbor made a lot of noise during past couple of days. That is cool idea. Not sure how other viewers would react to that 🤔. Anyway, I will be doing more projects out of wood in near future...
Good job. I think this is from the 60's not 50's, but it's hard to say for sure only seeing a vid. Was a time when I could have really used a knife like this.
Made between 1942 and 1944 in Sheffield, England. Issued to navy men during WW2. The year of manufacture is usually located at the bottom end of the knife blade. The year is stamped on in small font.
@@user-qi5vj9zy9t How did you narrow that down? I had trouble finding anything on them, what I did find was 60's. but apparently the same or similar has been made for a long time.
Thanks for giving me a reference point on how to restore a marline spike pocket knife. Now I have a stepping stone to work with should I need to restore my E.D.C. should it get damaged. :)
Отличная реставрация! Имею такой нож с 2007 года. Стоил 6$ в армейском магазине. Только с отпиленым шилом (почему-то их так завозили из Европы). Прижился в кармане, притом, что есть уйма других ножей. Именно этот самый обиходный. Открывалка для консервов - дрянная, коряво мнет жесть. Но вот сам клинок из великолепной углеродки. Затачиваю без всяких точилок - просто об мелкую наждачку на ровной поверхности. Ношу на шлевке джинсов на карабине с кожаным темлячком. Замечательный нож.
I love my old WW2 pocket knife. Same as this one, and in great functional condition; the blades snap beautifully. They need a decent polish up and sharpening, though. I picked it up for peanuts in a car boot sale.
@@FFD_Restorations I used it three times today; first time I've actually used it outside my home. I usually have my 1967 Sheffield (Richards) scout knife, which my parents gave me when I reached 10 years old.
@@FFD_Restorations Actually, it went missing years ago, then mysteriously reappeared one day without warning. It's the only example I've ever seen of one of them, but Richards must have made thousands of these inexpensive knives. Spear blade; can opener; bottle opener combined with screwdriver and a weird saw-like blade which I think is for descaling fish, with something for extracting fish hooks on the tip of it.
I enjoyed the non-power tools, the bench hand drill press and the crank wire brush. I would like to get those for myself, I am blind a power tools are a little dangerous for me to use. Links?
Great job! Vises aren't that hard to find but would love to track down some of these hand powered tools! My dad gave me one of these knives but not in as bad shape as yours was originally. Evaporust and some hand polishing might spruce mine up a bit.
You could still buy these from a shop in Worcester UK in the 80's . Lost mine on a beach in West Australia in 93 . The replacement model is all stainless with a different can opener.
Hola, me ha gustado tu video, y tengo una navaja igual que la tuya y la tengo desde hace 20 años. Me la regalaron y ya de por si el dueño anterior la uso mucho, porque esta muy desgastada. Mi pregunta es, ¿esta navaja es del ejercito español de la marina? ¿sabrias de que año es? He mirado por internet y catalogos pero no he recibido respuestas...
I found a similar knife in Bradford in the 1950s. It was manufactured by a company in Sheffield called Wall & Butcher in 1937. Your restoration was inspiring and raised a few questions, like, were they originally built by hand? How long did your restoration take?
I am very interested in what you replace pins with. Thin brass welding rods work in some situation, but I recently bought an old all stainless military knife that will have to come apart as the main blade is broken and remaining blades are very rusty.. What would you use if you cannot save the old pins?
Hey John! Welding rods are usually 1.6 or 2.5 mm thick and 20-50 cm in length. I am using 2 and 3 mm thick brass pins between 10 - 20 cm in length. You can use brass, copper or soft steel pins. I like the most brass ones... search in your favorite web browser and I am sure you will find some 😉 Thanks for watching!
Hi! Thanks a lot Gareth! Do you mean for polishing or? For polishing I am using Autosol metal polish. For the handles in this video I used homemade beeswax finish...
Non ci posso credere....stavo cercando un video su come restaurare il coltellino di mio padre e trovo un video dove lo restauri. lo stesso identico!! Non me lo aspettavo😅 grazie di cuore😄😉 P.s. nel mio c'è scritto sulla lama "coricama" ed è un coltello dato in dotazione dall'esercito italiano. Infatti lo darono a mio padre quando si arruoló nel 70. In origine era nato per la marina, perché la punta (chiamata caviglia) serviva per sciogliere i nodi e impiombare. Poi in seguito lo adottò l'esercito italiano e sempre la punta la usavano come spina per il fucile. Che figata😁
Bakelite scales? A beautiful job. I have the newer one, smaller all stainless steel. Prefer the old style that you restored...nothing like a good rigging knife, a wonderful tool. Probably why I carry a slip joint knife and a Benchmade or Spyderco daily. The slip joints get much more use.
I have a knife exactly like that one...mine has the WD 'crowfoot' mark and '1941' stamped on the blade. I'm not sure I have the courage to take it apart and restore it 😟
Very nice restoration. And just a question with regards to your handcranked grinder. Wouldn't it be easier to convert it to foot pedal drive, just like those old sewing machines? That would free both hands for holding your work.
Thanks for watching. Yes, absolutely! I am working on that 😉 I did recently a workshop tour and it would be great to hear more suggestions from you! Link to video: ruclips.net/video/z3JBmDLsKWg/видео.html Thanks!
Took apart my Sheffield 1943 dated jack knife. The blade was so worn it was loose when open so had to weld in extra metal. Now it's tight and have to be careful when closing it.
This is a WW2 British Army issue Clasp-Knife. The Marlin Spike was common (so I've read) on Army and Navy issue pieces. This one, with the metal bolster, is a pre 1942 model. Earlier models had a copper lanyard loop. I understand that the bolsters were redacted as they added complexity to the knife's construction, and from '42 onwards the knives were produced without them. I believe that they may have been added back after 1946/7, but I am not 100% sure. I think that from the 50's onwards, the standard British Army Clasp-Knife was simplified, so that there are no black plastic 'scales' any more. In any case, the Can Opener tool should have a 'War Arrow' stamp that'll identify it for sure :-)
Civilian version of the British Army jack knife. Military versions have the date and the /|\ 'broad arrow' symbol stamped on them. Mostly made by Richards or Rodgers. Good restoration.
Très très jolie restauration ! Une question : Qu’avez vous utilisé pour le riveter ? J’ai envisagé de faire la même chose mais j’ai peur de ne pas trouver de rivets ...
I believe it’s British standard WD issue. I have it’s brother, mine has a screwdriver and blade, not the marlin spike. They were issued by the bucket load to be used and abused by all, even after WWI. I’m thinking it will last a lot longer than me, or my grandchildren. Nice to see they now have some value. Edit: I wonder how many are rusting away in garden sheds everywhere!
The ww2 version is much simpler. About 4 1/2 inch over all 2 1/2 inch blade single blade with marlin spike on the back . All metal. Though I do have a stainless one with two blades dated 1945 with broad arrow marks , no idea who woul dhave used that. Both my type and yours where very common in the 1950's , '60's . Both with screwdriver blade on the end.
It wasn't just for sailors, it was made for all branches of the armed services and it is a 1942 by Richards of Sheffield, more of these were given to Army personnel than Navy. However if there weren't the Richards stamp on the blade then it is either a very good copy of the main blade has been replaced, either scenario the value has significantly dropped. Fantastic work on the restoration though even if you were making me nervous when you were peening the pins over and hitting the bakerlite scales.
That is a splicing knife. It is used to splice fiber or wire rope. The marlin spike on such a tool is referred to as a “fid”. It is better adapted to opening the lay in a line rather than wire rope but can be used as a marlin spike occasionally. The knife blade is specifically for cutting line. The “can opener” is a lay hook. It is used when splicing wire rope to open the strands and “un-lay” a section then close the lay once a splice is made.
if you find out the make of the knife please let me know, i have a couple of very similar handled knives i have found metal detecting, sadly all way to far gone to bring back to life, but would love to know what they are called.
They are British army issue clasp knives. Used from the late 1800’s to today in some parts of the armed forces. I would like to know where you found them metal detecting? I would guess France somewhere as they were used in both world wars. The company that made them is called ‘Sheffield knives’ made in England of course. I don’t know if they still make them or someone else does but the company is still around.
There is an area I go to where I have found many, all in really bad condition sadly, I do know that many different groups of forces trained there during the war.
I like your work and do realize that your gimmick is to do everything by hand with no power tools. However, if you got a nice (powered) bench top drill press, a (powered) grinder and (powered) buffer setup, you could do the same and more with still doing the finesse of hand work as well. It would not only allow you to really polish the different blades to mirror finishes, but you could post even more projects in the same amount of time. And I think you would even gain more viewers too. JMHO
Thanks for the tips Gary and watching of course. I have a plan of expending hand cranked tools but I will keep it powerless. I like taking time doing things. The whole point is to slow down. I don't mind if my channel takes longer time to grow or don't grow at all. I am not driven by money or to get to somewhere fast as possible. I see challenges in doing things without power tools, pressing buttons is easy and almost no skills required (for vast majority of power tools) ... I really do appreciate your thoughts and desire to help! Take care
excellent ... it is a very nice pocket knife... greetings from Argentina
Thanks a lot! Greetings!
LOVE the old hand-powered tools! rare and beautiful!
Me too! Thanks for watching 👍
a handyman and an old bicycle would turn it into a foot powered grinder : )
Fantastic restoration, well done. Thanks for sharing.
Many thanks!
Beautiful restoration, the scales are incredibly tough and flexible acts like delrin, but don’t think the had that material in the 50’s Great presentation also... Keep up the great work!!!
Many many thanks Bradley for watching. I was honestly quite surprised with flexibility and quality!
Well made pocket knife 👌
@@FFD_Restorations I've got one in my hand issued to my Lance Coporal dad in 1944, dated on the tin opener, W&S.B Sheffield with the broad arrow so now 79 years old. The only difference is there are rivets and washers instead of the end caps on the scales. It has seen better days but still useful and tough as old boots.
Never seen one of these knives restored, they're so lumpy and tough you can get away with a clean, oil and a sharpen and they'll keep working more often than not. Enjoyed seeing the knife taken apart in all its overbuilt, lumpy glory!! You did a great job of restoring it.
Thanks 👍
Beautiful job...like the fact all is done by hand. Great fun to watch, keep up the wonderful job!
Thanks a lot, glad you liked it 😊👍
That's a well made knife...serious craftsmanship
😆👍
Great job man that's the next night I'm looking for in my collection great job I love the fact that you preserve the original handles
Thanks Tristan, much appreciated!
I just found your channel. It's awesome how you bring back old knifes to live again
Thank you Rasmus, welcome aboard 🙂👍
Skål!
That one was Hard to dismantle... Superb work
It was difficult with this one. But persistence paid of 😆
Thanks for watching man 👍
@@FFD_Restorations seemed nuclear bomb proofed...
And hey, easy 10k,congatulations!!!
@@alexanderalbach468 something like that...
Thanks man!
Wow beautiful restoration a true craftsman a real pleasure watching you at work .
Glad you enjoyed it Tony, thanks for watching my older videos 😆👍
Hallo from Italy, I got the same old knife it was in my family in the '50. My father said me it was a WW2 knife. Great restoration job.
Hello Emanuele! That is cool 😎👍
That’s is a really tough old knife. Great job.
Yeah, definitely is 😊
Thanks Derek
That old mechanical drill press is sooo cool.Also ,GREAT JOB
Thank you so much, I appreciate that!
Always amazes me the work and care you put into these nice restorations with elbow grease. Standing by for your next vid. Ths!
Glad you liked it, thank you for support Mike 😆👍
Nice knife, nice restoration. Congratulations!
Many thanks Jose, also thank you for watching 👍
I need to find a knife with a marlin spike one of these days. Great job on the resto!
They are definitely handy to have, especially for you now when you are a boat owner 😆👍
Thanks for watching Grant! Cheers
British Army Jack knife dating to after WW2, likely 1950's, got one exactly the same
Cool, thanks for sharing. Very nice pocket knife, they er unbreakable.
Thanks for watching 👍
Why the marlin spike (for splicing rope)? I thought it was British navy.
@@garymarlow9612 ni idea, but my dad had one when he was in the Royal Engineers and they were standard issue equipment to troops, wondered myself and been told it goes back to horse and wagon times and was used for ropes and getting stones etc out of horse's hooves
andy cousins works for me
Is Andy Cousins really you're name?
Nice one mate!
That's a ww2 British army clasp folder with a marlin spike.
Excellent job
Thanks a lot mate, much appreciated 😉
post WW2, they didn't have the can opener on them, that came in just after WW2, 1947 I believe
@@andyc750 www.loveantiques.com/antique-militaria/swords-knives-and-weapons/world-war-2-wwii-1939-british-army-military-vintage-folding-clasp-knife-jclarke-and-son-sheffield-125918
👍
@@andyc750 Not so - I've got a 1943 broad arrow Richards with the can opener.
identical knife to the one I had in my military service, in 1985, branded Coricama. Great job as always
That is awesome ! Thanks a lot!
Thank you for that lovely cleaning I have one but the can opener has bottle opener too as you said.best luck for your next project
Thanks so much! 😊
I have this knife. Beautiful restoration.
Oh cool, that is great to hear! Thanks for watching 👍
This is very nice sailor pocket knife. Good job and restoration.
Thanks 😊👍
Estupenda restauración, y ciertamente la excelente calidad de los materiales y componentes de esa excelente navaja-multiherramienta, ayudan mucho. Por cierto, una pregunta curiosa: ¿porque no se aprecia en el video cuando las limpias con alguna solución líquida?
Gracias Celes!
Porque no lo he limpiado en ninguna solución ...
Fantastic job!
Thank you very much!
Absolutely beautiful work!
Thank you Gary 😊👍
Wow those British Army knives are really well made
Fantastic Work...and a beautyful old Knife!!! Thanks for Präsentation
Thank you so much for watching!
Nice job. Tough to get apart though. That was some work. 🔪🎸
Yes it was! Thanks a lot 👍
Was i the only one hearing a construction site when he sped things up??😂😂 great vids love your channel btw its very unique compared to other restoration channels i find on here
Thanks for watching, that was my neighbor 😂
That looks beautiful now. Well done 👍🏻
I am glad you liked it, thank you for watching and reaching out 😊👍
Beautiful restoration 👍
Thanks a lot 😄👍
Very nice and clean job ,weldone fro Israel
Thanks Nissan, much appreciated!
Greetings to Israel 👋😉
Um excelente trabalho. Parabéns!
Muito obrigado Adriano!
Me being a Sheffield lad I had one as a boy. Great video and all the best from Sheffield;-)
Thank you kindly, you too 👋😊
Nice restoration!! I have my great grandfathers jack knife which is dated 1940, it was standard army issue and he would have used it in France and Germany during WW2. It is exactly the same as this but without the marlin spike. I am looking into how I can look after it and clean it up but without access to many tools.
Hey Jack, thank you so much for the comment and checking out my video. That is so cool! If you don't want to disassemble it, use fine sandpaper or wool pad to clean it and make sure to apply some kind of protection. That could be a light coat of oil or what I like to use is beeswax mixed with a bit of oil. Take care!
@@FFD_Restorations takk Boris 👍 Hoppas du har en bra helgen
Bare hyggelig, takk det samme 😄👍
great work as always. Like how Mr. Woody is holding a cup too 😂
Hehe, thanks Latessa, highly appreciated 🙏. You have a good eye for details 👌
Do u live near a ship dock or something? I had to listen real close after u said background noise lol. Your next project should be something wood. You should build mr. Woody a girlfriend lol
Lol not that close to dock but my neighbor made a lot of noise during past couple of days. That is cool idea. Not sure how other viewers would react to that 🤔. Anyway, I will be doing more projects out of wood in near future...
FFD Restorations well whatever you do ill be here watching.
Thanks, much appreciated 😄👍
Fantastic restoration I really like the brass pins great job :-)
Thank you! Cheers!
Good job. I think this is from the 60's not 50's, but it's hard to say for sure only seeing a vid. Was a time when I could have really used a knife like this.
Thanks for watching, yeah it is hard to say precise for this one!
Made between 1942 and 1944 in Sheffield, England. Issued to navy men during WW2. The year of manufacture is usually located at the bottom end of the knife blade. The year is stamped on in small font.
@@user-qi5vj9zy9t How did you narrow that down? I had trouble finding anything on them, what I did find was 60's. but apparently the same or similar has been made for a long time.
@@tootall5559 I have a few. All are date stamped. UK navy jack knives.😂
@@user-qi5vj9zy9t I probably found more recent clones.
Very impressive work
Thank you very much! Highly appreciated 👍
Muy buen trabajo quedo 10/10
Vaya, muchas gracias 😃👍
@@FFD_Restorations esas cosa que areglas serian de otras personas y tu les cobras?
@@elpelucasape89 Yo restauro mis propios artículos, no para los clientes.
Nice work.
Thank you very much Mats 👍
Hi Boris! nice work, turned out really great.
I like the pins. And also I got to see the hand drill in action 😀👍
Love it!
Hello Lukas, nice to hear from you! Yeah, I think brass pins looks better than the original ones...
Thanks for watching man 😃👍
Thanks for giving me a reference point on how to restore a marline spike pocket knife. Now I have a stepping stone to work with should I need to restore my E.D.C. should it get damaged. :)
👍
Amazing...
Would be fun to see your collection of knifes that you have bringed back from the dead.
I did a post on that before I moved to this bigger shop... Thanks for watching!
Well done
Highly appreciated Mike 👍
Wonderful work. I have one of these and a larger two blade earlier non rigging one dated 1939
Wow, that is cool Kelvin. I couldn't find an older version, but I will keep looking...
Thanks for watching 👍
FFD Restorations. I have a pic of both of the knives. Can I send them to you?
Wow! Nice work!!
Thank you so much 😀
Nice job 👍
Thank you! Cheers!
Bravo super restoration 👌
Many thanks Tomasz 😀👍
Excellent restoration bro, new subscriber from the UK.
Thanks and welcome 👍
Отличная реставрация!
Имею такой нож с 2007 года. Стоил 6$ в армейском магазине. Только с отпиленым шилом (почему-то их так завозили из Европы). Прижился в кармане, притом, что есть уйма других ножей. Именно этот самый обиходный. Открывалка для консервов - дрянная, коряво мнет жесть. Но вот сам клинок из великолепной углеродки. Затачиваю без всяких точилок - просто об мелкую наждачку на ровной поверхности. Ношу на шлевке джинсов на карабине с кожаным темлячком. Замечательный нож.
Большое спасибо
Да, это хороший нож 👍
I love my old WW2 pocket knife. Same as this one, and in great functional condition; the blades snap beautifully. They need a decent polish up and sharpening, though. I picked it up for peanuts in a car boot sale.
Cool 👍
@@FFD_Restorations I used it three times today; first time I've actually used it outside my home. I usually have my 1967 Sheffield (Richards) scout knife, which my parents gave me when I reached 10 years old.
That is great to hear. Please be careful to not lose it. That would be a shame!
@@FFD_Restorations Actually, it went missing years ago, then mysteriously reappeared one day without warning. It's the only example I've ever seen of one of them, but Richards must have made thousands of these inexpensive knives. Spear blade; can opener; bottle opener combined with screwdriver and a weird saw-like blade which I think is for descaling fish, with something for extracting fish hooks on the tip of it.
Awesome informational educational video experience Y'alls God Bless Ya 🙏
Thanks again Steven!
I enjoyed the non-power tools, the bench hand drill press and the crank wire brush. I would like to get those for myself, I am blind a power tools are a little dangerous for me to use. Links?
When are we getting a video about that funky vise?
What would you like to see about that vise? I haven't planned doing a video...
Great job! Vises aren't that hard to find but would love to track down some of these hand powered tools! My dad gave me one of these knives but not in as bad shape as yours was originally. Evaporust and some hand polishing might spruce mine up a bit.
Thanks for watching 👍
Good luck with yours!
Buen video quedo de maravilla, es stainless rostfrei? porque creo que tengo una parecida a esa.
Muchas gracias. Este no es de acero stainless rostfrei, sino de acero de calidad.
Those things are tough as old boots
😊👍
True talent.
Much appreciated 👍
Great job
😊👍
Congratulations, excellent work, the knife seems very heavy, its steel seems robust. Saludos desde Argentina 🇦🇷
Thank you Diego!
Greetings from Norway 👋😃
@@FFD_Restorations Norway? uhh how cold it must be in those places, land of brave Vikings, greetings friend.
Amazing work!
Thank you Kostas 😊👍
Amazing
You could still buy these from a shop in Worcester UK in the 80's . Lost mine on a beach in West Australia in 93 . The replacement model is all stainless with a different can opener.
That is cool, too bad you lost yours!
This is a very cool knife.Top Job.👍🇩🇪🙋♂️
Yes, totally. Thanks again Kay 🙋♂️
Great youtube! Qustion as to what kind of vice you using. I dont know those types?? Ebay??
Thank you so much! Yes, here you can see an example on this affiliate link: ebay.us/awYoSI
Thanks for watching!
Hola, me ha gustado tu video, y tengo una navaja igual que la tuya y la tengo desde hace 20 años. Me la regalaron y ya de por si el dueño anterior la uso mucho, porque esta muy desgastada. Mi pregunta es, ¿esta navaja es del ejercito español de la marina? ¿sabrias de que año es? He mirado por internet y catalogos pero no he recibido respuestas...
Hola Angel!
Este se produce en Inglaterra. Desafortunadamente, es difícil decir un año o más detalles ... Gracias por vernos!
@@FFD_Restorations Muchas gracias por contestar , y gracias por la informacion y un saludo desde España
@@angelvilladaortiz4261 De nada!
Saludos
Great restoration. Well done!
Question. Where do you find all the different knives for your videos?
Thanks Emil 😊👍
Mostly from guys who sell them on local ads...
I found a similar knife in Bradford in the 1950s. It was manufactured by a company in Sheffield called Wall & Butcher in 1937. Your restoration was inspiring and raised a few questions, like, were they originally built by hand? How long did your restoration take?
That is awesome! I don't track how much it takes to restore. Thanks for watching!
I am very interested in what you replace pins with. Thin brass welding rods work in some situation, but I recently bought an old all stainless military knife that will have to come apart as the main blade is broken and remaining blades are very rusty.. What would you use if you cannot save the old pins?
Hey John! Welding rods are usually 1.6 or 2.5 mm thick and 20-50 cm in length. I am using 2 and 3 mm thick brass pins between 10 - 20 cm in length. You can use brass, copper or soft steel pins. I like the most brass ones... search in your favorite web browser and I am sure you will find some 😉
Thanks for watching!
@@FFD_Restorations Thanks, I admire your work.
😃👍
Very nicely done. I thought for sure the scales were going to snap...
Thanks a lot! It was intense with scales for sure
Hi there great video, but if I may ask what cream are you using
Hi! Thanks a lot Gareth! Do you mean for polishing or? For polishing I am using Autosol metal polish. For the handles in this video I used homemade beeswax finish...
@@FFD_Restorations thanks I knew it was autosol 😆thanks man you have a good one
@@garethmorgan2124 you are welcome
Thanks, you too
Насколько изначально прочно был сделан нож! Даже разобрать было непросто. Настоящее качество из Шеффилда, инструмент для тяжелой работы.
☺️👍
Nice work 👍
Much appreciated 😆👍
Looks just like my dad's WW2 issue pocket knife and he was Airforce and Aircrew
Nice work! :)
Many thanks 👍
Non ci posso credere....stavo cercando un video su come restaurare il coltellino di mio padre e trovo un video dove lo restauri. lo stesso identico!! Non me lo aspettavo😅 grazie di cuore😄😉
P.s. nel mio c'è scritto sulla lama "coricama" ed è un coltello dato in dotazione dall'esercito italiano. Infatti lo darono a mio padre quando si arruoló nel 70. In origine era nato per la marina, perché la punta (chiamata caviglia) serviva per sciogliere i nodi e impiombare. Poi in seguito lo adottò l'esercito italiano e sempre la punta la usavano come spina per il fucile. Che figata😁
Fantastico, grazie per la visione 😃👍. È bello sentire per il coltello! Buona fortuna con il restauro!
Saluti dalla Norvegia 👋🙂
Bakelite scales? A beautiful job. I have the newer one, smaller all stainless steel. Prefer the old style that you restored...nothing like a good rigging knife, a wonderful tool. Probably why I carry a slip joint knife and a Benchmade or Spyderco daily. The slip joints get much more use.
Cool! Thanks for watching Nancy 👍
I have a knife exactly like that one...mine has the WD 'crowfoot' mark and '1941' stamped on the blade. I'm not sure I have the courage to take it apart and restore it 😟
That is cool, maybe just to clean it up without dismantling?
Very nice restoration.
And just a question with regards to your handcranked grinder. Wouldn't it be easier to convert it to foot pedal drive, just like those old sewing machines?
That would free both hands for holding your work.
Thanks for watching. Yes, absolutely! I am working on that 😉
I did recently a workshop tour and it would be great to hear more suggestions from you! Link to video: ruclips.net/video/z3JBmDLsKWg/видео.html
Thanks!
Took apart my Sheffield 1943 dated jack knife. The blade was so worn it was loose when open so had to weld in extra metal. Now it's tight and have to be careful when closing it.
That is cool, nice way to fix the issue 👍
Реально ручная работа!
This is a WW2 British Army issue Clasp-Knife. The Marlin Spike was common (so I've read) on Army and Navy issue pieces.
This one, with the metal bolster, is a pre 1942 model. Earlier models had a copper lanyard loop. I understand that the bolsters were redacted as they added complexity to the knife's construction, and from '42 onwards the knives were produced without them. I believe that they may have been added back after 1946/7, but I am not 100% sure. I think that from the 50's onwards, the standard British Army Clasp-Knife was simplified, so that there are no black plastic 'scales' any more.
In any case, the Can Opener tool should have a 'War Arrow' stamp that'll identify it for sure :-)
Civilian version of the British Army jack knife.
Military versions have the date and the /|\ 'broad arrow' symbol stamped on them.
Mostly made by Richards or Rodgers.
Good restoration.
Yes, that is correct 👍
Thanks!
Mine is made by George Wolstenholm and Son.
Très très jolie restauration ! Une question : Qu’avez vous utilisé pour le riveter ? J’ai envisagé de faire la même chose mais j’ai peur de ne pas trouver de rivets ...
Merci beaucoup. J'ai utilisé des rivets en laiton. Vous pouvez les trouver sur Ebay ou Amazon. Voici le lien d'affiliation pour Ebay: ebay.us/OPLTi8
@@FFD_Restorations c’est le top merci beaucoup vraiment ! Et joli boulot !
I believe it’s British standard WD issue. I have it’s brother, mine has a screwdriver and blade, not the marlin spike. They were issued by the bucket load to be used and abused by all, even after WWI. I’m thinking it will last a lot longer than me, or my grandchildren. Nice to see they now have some value.
Edit: I wonder how many are rusting away in garden sheds everywhere!
Thanks for sharing Mergrew, that is good to know! I appreciate that. Stay safe!
The ww2 version is much simpler. About 4 1/2 inch over all 2 1/2 inch blade single blade with marlin spike on the back . All metal. Though I do have a stainless one with two blades dated 1945 with broad arrow marks , no idea who woul dhave used that. Both my type and yours where very common in the 1950's , '60's . Both with screwdriver blade on the end.
👍
It wasn't just for sailors, it was made for all branches of the armed services and it is a 1942 by Richards of Sheffield, more of these were given to Army personnel than Navy. However if there weren't the Richards stamp on the blade then it is either a very good copy of the main blade has been replaced, either scenario the value has significantly dropped. Fantastic work on the restoration though even if you were making me nervous when you were peening the pins over and hitting the bakerlite scales.
That is a splicing knife. It is used to splice fiber or wire rope. The marlin spike on such a tool is referred to as a “fid”. It is better adapted to opening the lay in a line rather than wire rope but can be used as a marlin spike occasionally. The knife blade is specifically for cutting line.
The “can opener” is a lay hook. It is used when splicing wire rope to open the strands and “un-lay” a section then close the lay once a splice is made.
Wow, thanks for sharing!
Нож такилажный👍👍👍
😊👍
if you find out the make of the knife please let me know, i have a couple of very similar handled knives i have found metal detecting, sadly all way to far gone to bring back to life, but would love to know what they are called.
Hey, many comments saying more about this knife, please take a look at them. The only info what I found on the blafe is Sheffield England...
They are British army issue clasp knives. Used from the late 1800’s to today in some parts of the armed forces. I would like to know where you found them metal detecting? I would guess France somewhere as they were used in both world wars. The company that made them is called ‘Sheffield knives’ made in England of course. I don’t know if they still make them or someone else does but the company is still around.
There is an area I go to where I have found many, all in really bad condition sadly, I do know that many different groups of forces trained there during the war.
That particular one was made between 1942 and 1944 for the Navy men during WW2.
I was so excited to see the drill press in action. Too bad :( Great work as always though! 🥳
Sorry about that, hopefully next time. Thanks for watching 👍
I like your work and do realize that your gimmick is to do everything by hand with no power tools. However, if you got a nice (powered) bench top drill press, a (powered) grinder and (powered) buffer setup, you could do the same and more with still doing the finesse of hand work as well. It would not only allow you to really polish the different blades to mirror finishes, but you could post even more projects in the same amount of time. And I think you would even gain more viewers too. JMHO
Thanks for the tips Gary and watching of course. I have a plan of expending hand cranked tools but I will keep it powerless. I like taking time doing things. The whole point is to slow down. I don't mind if my channel takes longer time to grow or don't grow at all. I am not driven by money or to get to somewhere fast as possible. I see challenges in doing things without power tools, pressing buttons is easy and almost no skills required (for vast majority of power tools) ...
I really do appreciate your thoughts and desire to help!
Take care
FFD Restorations thats a great answer and a beautiful described philosophie. You have a new subscriber.
Hey there! That is much appreciated! Welcome aboard 😊👍
Nicce👍
Thank you 😊👍
What size bar do you use for the pins?
I can't remember, but I think it was 2,5 mm or 3 mm.
@@FFD_Restorations great work.
👍👍👍👍👍👍
😀👍
Where did you find that hand turn buffing wheel??
They can be found on ads, I had luck with this one 😊
C'est du boulot ! Combien de temps cette restauration ? Bravo ! P.S. j'aime le côté écologique de l'outillage ;-)
Habituellement entre 20 et 40 heures ...
Merci beaucoup 😃👍
Gdje nađeš te noževe.
Zdravo Petre!
Najčešće preko oglasa...
Pozdrav
@@FFD_Restorations zdravo može li neko ime nekog oglasa zanima me.
@@petarajip956 naravno finn.no
@@FFD_Restorations hvala puno.
@@petarajip956 :)