Here is an idea how about extending the shaft and adding a second coil wound in the opposite direction so there is power when it returns, like you see in a double acting hydraulic cylinder. That would be interesting to see.
pretty neat reminds me of a cylinder and piston from combustion engine, I thought at first you were actually switching the polarity back and forth with some component. Do you think you can create enough compression make an engine similar to a piston driven combustion engine if that makes sense? replace the petroleum fuel with magnetic force? would that be feasible or would it just be a total pain in the ass?
You could make a continuously flowing pump if you enclose each magnet in a piston head, then sealed that in its own chamber. Both chambers would have 2 oppositely oriented Tesla one-way valves each; the inlet Tesla valves are connected to each other, and the outlet Tesla valves are connected to each other. That way, no matter which side is drawing in or expelling fluid, there's always pressure. The only moving part is the single double-sided piston because of the Tesla valves. The clacking sound & some of the vibration can be eliminated/minimized by adding some sort of bumper (a rubber washer?) between the coil and the piston heads.
This is very good explanation. Could you please advise- if we apply 12V with a larger magnets and/or more coil would the motor move slower? How could it be calculated? Many thx!
do not instal a coil in front of the magnet. Make the solonoid bifilar. one channel is connect to the battery and the switch. The other channel is the pick-up coil. You draw freely voltage off from the coil and store it in the capacitor. Now, you can eliminate the battery and run the hole thing on the capacitor. The battery is there for charging purpose.
I am mriganka...from India...seen almost of your all videos...I am studying Diploma in Electrical Engineering....and love this....you have made a great handcraft...but it can be used to make a electrically driven solenoid engine....
Electric locomotive type vehicle, turning wheels and generator for battery? continued cycle? I wonder what kind of torque behind such motor for larger scale
Excellent video as I can use this project for another project I am making for a small sprayer. Excellent, this type of setup will work well in what I am making. A small amout of modifying and it will work nicely. Thanks for the help.
interesting! i'm looking for a fine oscillating motor like this. This motor is fitted in an air conditioner cooled by a stirling engine and I have been searching for a suitable motor like this for a long time.
If you manually move that magnetized rod within the coil, it also produce electricity, right? Please make a video on that.
Yup , but the efficiency would gonna be horrible
Here is an idea how about extending the shaft and adding a second coil wound in the opposite direction so there is power when it returns, like you see in a double acting hydraulic cylinder. That would be interesting to see.
In all realistic terms, the best uses I can think of are a jackhammer, vibration module, or subsonic sine wave generator on a speaker
interesting
and female vibrators :))))))
I dont quite see a true sine wave with this motor.
Can you make good vacuum compressor using this
можно ...делай
pretty neat reminds me of a cylinder and piston from combustion engine, I thought at first you were actually switching the polarity back and forth with some component. Do you think you can create enough compression make an engine similar to a piston driven combustion engine if that makes sense? replace the petroleum fuel with magnetic force? would that be feasible or would it just be a total pain in the ass?
you can but i don´t know how efficient would that be. I guess a normar rotary electric motor is more efficient
I wonder if a hollow ferrite core would work if you wound the magnet wire on that [assuming the reciprocating magnets dont break the ferrite] ?
The ferrite will attract the magnet
Ah; I see. Great videos by the way. Keep up the work.
You could make a continuously flowing pump if you enclose each magnet in a piston head, then sealed that in its own chamber. Both chambers would have 2 oppositely oriented Tesla one-way valves each; the inlet Tesla valves are connected to each other, and the outlet Tesla valves are connected to each other. That way, no matter which side is drawing in or expelling fluid, there's always pressure. The only moving part is the single double-sided piston because of the Tesla valves. The clacking sound & some of the vibration can be eliminated/minimized by adding some sort of bumper (a rubber washer?) between the coil and the piston heads.
Very clever indeed. Congratulations on an elegant solution.
Thanks! :)
This is very good explanation.
Could you please advise- if we apply 12V with a larger magnets and/or more coil would the motor move slower?
How could it be calculated?
Many thx!
HOW CAN U CHANGE SPEED OF THIS MOTOR DO U INCREASE VOLATAGE OR SOMETHING ??
do not instal a coil in front of the magnet. Make the solonoid bifilar. one channel is connect to the battery and the switch. The other channel is the pick-up coil. You draw freely voltage off from the coil and store it in the capacitor. Now, you can eliminate the battery and run the hole thing on the capacitor. The battery is there for charging purpose.
What came to mind for an application was to simplify a sewing machine or a toroidal winding machine.
yes
I am mriganka...from India...seen almost of your all videos...I am studying Diploma in Electrical Engineering....and love this....you have made a great handcraft...but it can be used to make a electrically driven solenoid engine....
Yes it will work for that :)
Electric locomotive type vehicle, turning wheels and generator for battery? continued cycle? I wonder what kind of torque behind such motor for larger scale
interesting to fnid the torque
Can you use small amount of the a.c voltage? And do this experiment ? With out 3rd magnet.
you mean instead of AC?
@@ludicscience yes sir
Hi!
How mutch turn?
What is the diameter of wire?
Please ansver this questions.
Thankyou.
1000 turns, 30 gauge wire
@@ludicscience Thank you!
Excellent video as I can use this project for another project I am making for a small sprayer. Excellent, this type of setup will work well in what I am making. A small amout of modifying and it will work nicely. Thanks for the help.
An interval marker or impulse metering device. As an alarm, it runs until current stops. Connected to a piezo, a sort of interval signal generator
Can the rod reciprocating in about 20.000 times a second... It can be used as ultrasonic actuator then..
Lidic Science I really enjoy your videos. Keep them coming!
Nice! Put it vertically to use its own weight, with AC current.
use its own weight interesting
Hi this is cool... was thinking about two hand shake torches places on the ends of those arms
nice
Hi I enjoy your videos. A question can you catch the back emp and feed it back to the battery? A boxer motor would be nice.
yes you can but it helps very very little
Magnetic switch?
Many hours of fun, I can tell! What if you got rid of the switches and the extra magnet, and gave it 12V AC instead of DC?
And the switch has limited life.
This is most interesting. I think you could make a clock using this principle. Thank you.
But can it be used for propulsions?
There is a n similar concept
this motor can run a generator coil with less Lenz effect
What's the material of your metal rod?
nail
Good use of electronics and magnetism for teaching kids, well done, thanks
If I use a larger copper wire with less turns ; will it work ?
Just curious!
yes
interesting! i'm looking for a fine oscillating motor like this. This motor is fitted in an air conditioner cooled by a stirling engine and I have been searching for a suitable motor like this for a long time.
Where are you from iam from India.love your video's every time.
the other side of the world, thanks!!!!!!!!!!
He says that this is powered by the magnets on the end of the bar but when you actually buy one it moves the rod not the ends of the rod
As a two way switch??? 🤔
maybe
Reed switch.
Why does the closeness of the switch affect the functioning of the coil?
@BS Handle Created So it's the magnet that increases the function? Why? Thanks for your answer btw
da pra fazer um motor elétrico a impaquito
Perfect for stirling engine displacer
Hi ..what's the magnetic switch ?could u give us adjagram of its structure,please do..thanx
In an air compressor
Are you from USA???
Nice experiment Sir 👍
bom trabalho. isso é também um botão de volume elétrico
This may be used to build a reciprocating electrical engine. Can you build one please. By the way which country are u from. I am Indian.
nice idea
I really love this video. Thanks for sharing.
glad you like it
Thank you for these great info and knowledge you give ... i am following all your videos ... they are all great ... thanks 👍👍👍👍
Linear piston driver in a stirling heat pump
amazing! yes put a coil inside to have ac thanks
thanks
It is very good for swinging a pendulum
Please check my smaller version, of this Linear Pulse motor with Back E.M.F demonstration People 🙏- ruclips.net/video/MxBn0CKUpFE/видео.html .
saudações do Brasil a todos. interessante. aparelhos simples como esse nos fazem entender melhor como o electromagnetismo funciona. parabéns. sucesso.
obrigado gracias
@@ludicscience . saudações. tu merece. tudo de bom.
Bro can you make electromagnetic levitation
Really helpful content! 👌
вижу но непонимаю как третий постоянный магнит меняет направление тока ...чтобы стержень пошел обратно
aplications : cofee machines , espreso more acurately , butchered one , and build up a car oil pump out of his linear motor :)
I wonder why we don't have linear motor
nice information 👍
Excellent. Thank you.
Wow thats a ludic motor
:)
if you can... give to link buy magnetic switch...
Good Demo by you? 🌹🌹🌹🌹🌹🌹🌹👍👍👍👍👍👍👍👍👍👍
just for Jigsaw for woodworking :)
Amazing 👍
ty
nice!
Дружише, поставь геркон на разрыв питания соленоида - будет проще!
Its amazing idea.
I love your videos but it's not a linear motor.
You´re right it has linear movement but does not fit the standard definition of a linear motor
tHE rOOT mACHINE I lOVE iT
:)
Just make it biger, and thats a fap machine
Very good 👍👌
with AC it should be more powerful and does not need the last magnet nor sensor
yes i will try it
Nice !👍👍👍
piston water pump
Make a drsstc
wow that is a nice project
Maybe scaling it up for a f"cking machine ?
piston
Il à pas inventé le file à coupé le beurre 😅😅😅😅😅😅 un électro ordinaire 😅😅😅😅
great
ruclips.net/video/gp8Wg4FkF5E/видео.html
puede usarse en este motor.
motor boxer, como el de las motos BMW
Nice
i think this good for girl...😁😁
First
Hi!
What is your biography, give on RUclips and what's app contact, thanks for your feedback, I will wait for your feedback
lol, seems legit 🤣🤣
( ͡° ͜ʖ ͡°)