The switch will not last long. A power transistor would be much better. A diode would be needed to prevent transients from damaging the transistor. Variable speed can be achieved with a simple multivibrator. Regards, Engineer from India.
Nice work dude. I wish I had observed more closely as I followed the dimensions you wrote of the side and top plates you made not realising you changed it in the working model.
Tem que mostrar a fonte de energia. Até onde sei, não tem como gerar energia para isso, e mais com um único cilindro. Se fosse dois ou mais, as chances seria mais favorável. Mas gostei da engenharia, criação boa, dá para ter uma noção.
Dunno if anyone gives a shit but if you're stoned like me during the covid times you can watch all of the latest movies on InstaFlixxer. I've been streaming with my brother recently :)
El problema no es el motor es la energía barata para generar el movimiento. Cuánta energía consume y cuánta entrega. Con la mínima contaminación posible.
Hey i am just askinn will it work like if i put geared moter on the crankshaft and it generates power so can i connect the motor to ti the coil and make it run infinite ♾️ reply if yes or no
I also think any ferrous material would probably work, as the magnetic field from the solenoid would attract the material. Maybe by starting with something that already has poles the force is greater?
Está quase no ponto o uso de solenoide, no entanto ainda pode acontecer que o imã se desmagnetize aos poucos... Melhor seria se fosse atraído somente um dos polos.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
You got some great skills man.. feel the perfection in every steps, which is difficult to find in many youtube diy videos.. Keep it up..
deez nuts
USING THE DRILL TO SPIN YOUR COPPER WAS AWESOME
ruclips.net/video/K59lLp5oXLA/видео.html.
@@sagillat-1512 ?
Yes
you can use a motor too
Well that was cool and enjoyable to watch! Thanks
The switch will not last long. A power transistor would be much better. A diode would be needed to prevent transients from damaging the transistor. Variable speed can be achieved with a simple multivibrator. Regards, Engineer from India.
just make your own switch
Nice work dude. I wish I had observed more closely as I followed the dimensions you wrote of the side and top plates you made not realising you changed it in the working model.
The music will say it all!
Hahaha...
Your creation is easy to understand
Thank you
Great
You make a solonoied engin
I am make a steam engine
Plz next try to make a steam engine
👍👍👍☺️☺️
Very good!
Boa amigo.. chegando por aqui para prestigiar e fortalecer seu canal..Bom trabalho!!
ruclips.net/video/hUL1coD4SsQ/видео.html
Good job👍
sounds beautiful
Go to 7:51 to skip all of the building process
beautiful video
Super video, Thanks
Just a suggestion. You can try using Reed switch for exciting the electromagnet instead of mechanical switch.
Amazing 😍😍😍😍
Can eliminate the mechanical switch & noise with a big magnetic reed switch ! Good job though !!!!!!! Liberty Larry !!!!!!!
super cool! sounds nice haha
Helpful video sir
So good 👍👍👍
I like it
BRAVO... bien fait.. subscrit & like
Why uh supplying power..?
It’s a solenoid engine
Thank you .
Even better, feed the solenoid coil with a square wave from 555 IC to create a variable speed engine.
Correct.
Lo felicito bro por su ralento
Primero que nada buen proyecto
Segundo quisiera saber que potencia tiene en HP?
what are you using it for?
Hi, Nice work. You didn't show the power source and how to connect to it? Could you do that please? Thanks
where do we get the flywheel or something simmilar?
Amazing!!!!
Thank you brother
Nice try and great effort, my doubt is are you giving external power to this using that 2 extended wires?
Of course it's using external power. It doesn't work with magic
@@hene193 Yes you are right. Now i understand we should give some fuel to run any engine, here it's electricity. Thanks for the comment.
@@cypherLabs who are you
@@dhritimansalim6504 I was curious on how that engine works. I'm just a youtuber bro.
Very good
Very cool! Song names?
Awesome
Hi. Is it run by battary power supply or self running? Are you connecting the coil wire end part with anything
Yes it is connected to a power source
it's connected to a power source it's not free energy , THERE IS NO FREE ENERGY!
Я уже на третьей минуте понял что без синей изоленты работать не будет
Nice bro😍😍
Very nice 👍 🇰🇼جميل جداً
Tem que mostrar a fonte de energia.
Até onde sei, não tem como gerar energia para isso, e mais com um único cilindro. Se fosse dois ou mais, as chances seria mais favorável.
Mas gostei da engenharia, criação boa, dá para ter uma noção.
what was your electric service? battery
And that's how e board's where invented.
Dunno if anyone gives a shit but if you're stoned like me during the covid times you can watch all of the latest movies on InstaFlixxer. I've been streaming with my brother recently :)
@Gunnar Stetson yup, I have been watching on instaflixxer for years myself =)
What is role of that switch can you please tell me?
So you really madeaswitch tester? Lol but really this is cool
What determines the number of wraps of copper wire? I assume it’s a function of the strength of the magnetic field.
Good
I had a question, how are you applying 12 V DC when , both the wires are connected to the switch ?
Best idea
I never saw this kind of mechanical circuitry
Collapsing field. The same as a car ignition coil . Our future car engines.
Where did u get that flywheel?
Instead of magnet if you use iron piston, you may check if this runs faster. I.e. Bob teal's engine
The way I made it works pretty well too
How did you winded copper wire
El problema no es el motor es la energía barata para generar el movimiento. Cuánta energía consume y cuánta entrega. Con la mínima contaminación posible.
Why didn't you show what those 2 wires were connected to?
No muestras la batería donde están conectados los demás cables....
Con que voltaje trabaja o adonde está conectada la bobina???
Rahul Damor
12 volt 1~2 amps
How many watts is it consuming? what is the maximum RPM and torque ?
Great
That sounds like a real engine
mantaaap
indonesia .hadir
Good 👍😎 😶👏
Please tell us about circuit how to make that
The S.R.O. ! Leaves ! A !! Lot ! To be !.Disired !!
desired
Make it bang every 2 cycles and I'll like and subscribe
What are the 2 offscreen wires connecting to?
A 12V battery
GOOD job😀😀
Nice , But howmany volts supply.
Nice 💯
Can you make a diesel engine?
What if we use thin wire and give less or more turns please give me answer
Bhai aap ko saman use kar rahe ho o kahape milega
We still waiting on the kit. Somebody fears success .. or actual work
That clicking switch supppper se bhi uper
How much cc is it
Try to add more cylenders
Spne bhai ke liye
würde besser laufen, wenn das schwungrad richtig drauf währe?
can you increase the speed?
Use more voltage to more speed
Mantap 👍👍
Nyasar Ya Bro 😂
@@brokenwing9409 😂😂 gak bro emang sengaja😂
@@gesangmulya Tersesat Bersama 😂
@@brokenwing9409 senasib dong😂
Mamir jg ke channelku ya? Mohon dukunganya🙏🙏🙏
Can we buy this
👍Nice
Educational making
You didn't show the battery , you give to the coil how many volt to active the coil ?
Coba sertai generator mini berapa lama bertahan dan beban dibawa
Does this has no difference with a DC motor?
Super
Que lo hace gira alguna batería
Los alambre que salen sobrando donde van conectado que no lo muestra
I am confused as to how this works
ruclips.net/video/HohJrH7PLfE/видео.html
Hey i am just askinn will it work like if i put geared moter on the crankshaft and it generates power so can i connect the motor to ti the coil and make it run infinite ♾️ reply if yes or no
no it won't trust me THERE IS NO FREE ENERGY!!
@@IPagma-n7f ok thanks
Amazing, two coils pls
Can I buy this?
Sir please give explanation about this mechanism.
Back ground voice is not good
Not sure why you need magnets in the piston. A solenoid engine could just have a steel piston I think.
that's what I want to know
I also think any ferrous material would probably work, as the magnetic field from the solenoid would attract the material. Maybe by starting with something that already has poles the force is greater?
Muito bom
What are you hiding? Why don’t you show what those two wires are connected to.
It's just a power supply. You don't need any electronics, the cam turning the microswitch on and off does it all.
My opinion, the slow idle speed was a fake. The persons hand moved very slow. Watch close & see.
This is a single-cylinder perpetual motion machine, isn't it?
Perpetual motion machine does not exist
Sorry but Perpetual motion machines are IMPOSSIBLE 🙁🙁
Está quase no ponto o uso de solenoide, no entanto ainda pode acontecer que o imã se desmagnetize aos poucos... Melhor seria se fosse atraído somente um dos polos.
you can make a compressor.
Make a v9 like this
please the name of you background musik