2003 Tahoe Power Door Lock Power Window Master Switch Fix ©2018 B John
HTML-код
- Опубликовано: 15 окт 2024
- 2003 Tahoe Disassemble and Clean Master Power Window/Door Lock Switch
2003 Chevy Tahoe
Power Door Lock Switch Fix
Power Window Switches Fix
2003 Tahoe Electrical Repair
2003 Suburban
Tahoe Electrical Repair
I had an issue with the driver side door lock not engaging on my 2003 Escalade. Followed your steps and now works like a charm. You save me 179-200 dollars. Great Video!!
Great news, Leonard. Glad my video was able to help you. Thanks for watching!
Thanks! Your rubbing alcohol cleaning trick saved me at least $150.
You're welcome, Will. Glad my video helped with your repair. Thanks for watching, BJ.
At 8:20 if you would, stress that the switch needs to snap in place . I didn't get mine right, and twice had to pull it. One side did click, but only made contact with the rear passenger window. This video saved me 150 bucks, THANKS!
Thanks Kevin your comment will now let everybody know to make sure you get it snapped correctly. Glad my video help with the repair and save you some $$$. BJ
John, just want to thank you again for this video. It did in fact cure the sporadic lazy master lock/unlock switch on the driver side. Just a suggestion to those who may be attempting this hack. I'd suggest that in spreading the sides of the switch enclosure to release the housing to get to the circuit boards that you might consider cutting some strips of thin corrugated cardboard (about 1/16 to 3/32 x 1/2 x 1 in.) one for each slot about 8 total. Insert a small flat tip screwdriver and slide the cardboard tab in next to the slot to keep the stays from preventing sliding the housing out. This should ensure that the housing will slide out easily. Remember...take your time...slowly ease the housing out...and be gentle in there !! :)
Great suggestion - my blue trim tool worked pretty well but you can only do one tab at a time. Trim tool was part of a set from Harbor Freight, item #67021.
Great video thxs. You need to remove the door panel to unmount the control panel from the inside. There is a screw on the front that is accessible from inside the panel. I couldn’t lock my doors or control the passenger side window on my 2003 Chev Z71 but after following your instructions and cleaning up the contacts with alcohol wipes Voila she works again 👍
Yes I forgot to show that where my screw attached inside the door panel was already broken - the back clip still works and I secured the front with super strength double sided tape - holds like iron yet removable.
This fixed both my barely functional unlock switch and the loose/slow window switches. Both the rubber membrane and circuit board have to be cleaned very well. Thanks!
Glad my video helped you solve those problems. That's exactly what I was experiencing before I cleaned it up. Thanks for watching, Alan!
Thank you John my lock button wasn't working. Took me a couple times doing it had to go back and make sure everything was on the board correctly.
I put it on my 03 Chevy Avalanche.
Your video saved me like $130 bucks.
Thank you so much!!!!!
Hi Michelle, glad my video helped you with your repair and saved you money at the same time! Thanks for watching. BJ
Great Video. My 2006 Yukon is very happy now with all the windows working and the door locks working. Thank You!
Glad my little video helped with your repair, David. Thanks for watching.
Same problem! This video literally saved me 130 dollars!
Glad my video helped, Levi! Thanks for watching.
You made that look so easy!! I hope this fixes my issue with my window. Its gonna be scary to do but if it can save me 100 bucks on a new window switch ill do it.
Hope it works for you, Abe. It looks a little scary, but it's not too bad. Thanks for watching!
Thank you for the instructional video. My 2003 Tahoe LT driver’s door lock switch wasn’t working. I took about 30 minutes to remove, fix as you described, and replaced.
Works great! The forward plastic post which helps hold the assembly to the door panel was also snapped just as you suggested it wold be.
Note: The assembly fits so snuggly into the door panel that that forward broken pin is actually redundant.
Thanks again, sincerely,
Dennis in Coeur d’Alene, ID
Great news, Dennis! I'm glad my little video helped you with your repair. Thanks for watching! BJ
wondering how you replace the plasitc post that broken and the swivel part since as you noted this happen to us also
Thanks for the video. Door locks and driver window wouldn't work properly. This video solved the problems.
Great deal, Michael. I am glad my little video helped you out with your repairs. Thanks for watching. BJ
Thanks, easy fix. I immediately saw the corrosion on the drivers window connection and also some minor corrosion on the other ones but they were working but probably not for long. Snapped it back together and viola! Up went the window!!!!
Thanks, Michael. There are several things like this you can do yourself on the car to eliminate those pesky problems with the power windows. Thanks for watching.
Thanks man, worked like a charm but I think I’ve dropped mine just about as many times as you did! Quality Motorola product they’re serviceable. 2003 Yukon is still king of the road.
Glad to hear that my video helped!
Thanks! Saved me about $130 bucks, all the switches work great!!!!!!!
Thanks, Gary. Glad my vid helped you out! BJ
Good job. Very easy to follow comprehensive video. Thanks much!
Glad my video helped you out - I went into this not knowing what to expect and was able to clean the contacts and get it back together. Thanks for the compliments - BJ
Followed step by step. Works great now. Thank you so much!!
Thanks, Carl. Glad my video helped with your repair. BJ
I was having problem of raising the front passenger window - works great now! Thank you!
Great deal Matt! I'm glad my little video helped you out. Thanks for watching. BJ
This work 4 me thanks man ur a lifesaver and cash saver!
Glad my video helped with your repair - thanks for watching.
I’m having problems with both unlocking at the door switch and the remote. Were you having problems from the remote as well? It’s hit and miss.
I don't remember if I was having problems at the remote or not but I was definitely having problems at the door switches.
Just what I needed. Thanks!
Thanks, Jonathan. Glad my video helped you with your repair!
Thanks for showing me how, it worked well, saved me $$$....
You're welcome, Tim. Glad my video helped you with your repair!
Worked like a champ. Bro, you saved me some $$$
Great news, Karl! Glad my little video helped you out. Thanks for watching. BJ
Thank you....this was exactly the problem with my truck..
Thanks, Carmela. I'm glad my video helped you out! BJ
2003 avalanche, unlock not working on drivers side. Got it to program off pass side. Finicky thou. You have off-acc-run-start. I went hold unlock button, acc-run- acc -run let go unlock. doors auto lock-unlock. Hold down lock and unlock on fob till it works locks seem to take 30 seconds. it will erase all fobs that use to work so take next fob and hold lock-unlock till it starts working. Can program up to four fobs.May have try it a few times to get in program mode. Good luck.
What is it call the white thing when you clip back in I broke me but I don't know what it's called
The rear tab where the end of the switch assembly snaps down in is part of the door panel. I don't know what it is called but I think you have to replace the whole door panel in order to get another one. *** Mine was broken on the passenger side and I use double sided pressure tape to hold the whole switch assembly in place! *** Works great!
THANKS I HAVE 293 KI PROBABLY WILL FIX IT WITH YOUR INFO THANKS AGAIN DOC
You're welcome, Dave!
Please help!! I followed your instructions exactly. I even did the same thing on the passenger door. My passenger side windows still wont work. Any other suggestions?
What was wrong to begin with and did you follow GM electrical trouble shooting protocol? All of my windows and power locks worked B4 I did the cleaning of the terminals on the master switch.
Could be a bad window regulator
I got about the same problem with my 2003 Tahoe to.. passengerwindow is dead, and the powerlock won't lock the door. Have to lock it with the key. Right frontdoor.
question...the plastic that's attached go door panel that plastic that's holds master switch in place mine is broke is that plastic piece replaceable thanx
Hi Steven - The front post on mine was already broken, but the back piece (the white rectangle) was fine - I used some, thin, extra strength double sided tape to hold the front of the master switch in place - hasn't budged. *** I don't think the parts are replaceable, but used door panels are available at the local junk yard or on Ebay - Good Luck! ***
@@bjohn8059 thanx my man I'll try tape my man thanx...what size bolt is that I'm missing mine one above inside door handle
@@stevenbrown6782 I am not sure Steven - I may just be a #10 sheet metal screw. You might find out here on RUclips in a video that shows replacing the whole door panel.
@@bjohn8059 thanx man....have a good day
@@stevenbrown6782 You're welcome, Steven.
Thanks for the video!
Glad it helped, Eddie. Thanks for watching.
Worked great thanks!
Thanks, Brian glad my video helped!
Well done.
Thanks, J. Glad you like my video - BJ
Thank you
You're welcome, Danny. Glad my video helped you out.
@@bjohn8059 I appreciate it🍻
my Dad seen my work and was impressed now he is ready to start on other projects for our truck🙏
@@001dannyortiz Keep up the good work, Danny. I'm sure your Dad appreciates the help!
Dude thank you 🤝
Glad the video helped - Thanks for watching.
I figured the screw out I just watched the video on how to get that one plug of with grey thing on it
Also that extra wire should have been your heated mirrior power. I replaced my s stock broken mirror with trailer mirrors it has two plugins
I just snapped that whole silly grey locking thing off. Who comes up with these ideas? Guess thats why a truck is 60,000$ ;)
@@charlesc5983 There is also an extra wire for seat heat, which mine does not have. Thanks for watching.
That was easy... It's a shame 2001/2002 use a different switch... Impossible to take apart without breaking.
Bummer
WHY MUSIC GREAT INFO BUT CANT HEAR YOUR TEC MUSIC TO LOUD
Sorry, Dave. Can barely hear the music on my end.