Это видео недоступно.
Сожалеем об этом.
MSD Ignition Box - Differences & Features
HTML-код
- Опубликовано: 10 июн 2009
- Watch David Freiburger and Chad Reynolds guide you through the features and differences of the MSD Ignition 6 Series. Visit www.summitracin... to see our full selection of MSD Ignition parts.
@MrCarlosCruz1 Yes, in most cases the MSD 6 will fit any vehicle that uses a distributor. We’ve attached the instructions showing the installation. Page 6 has examples of popular vehicles.
FREIBURGER!! Big fan of Roadkill.
This will Increase the power, torque, fuel mileage, and reduce emissions. But I recomend, as most people do that you must use the blaster 2 coil, and MSD wire set along with the box to get the full benefit of a hi-powered ignition.
It depends on if your Accord has a single coil or a multiple coil (coil on plug) ignition system. If it is a single coil system, it will require just one of the boxes as shown in the video. But if it is a multiple coil ignition system, you would need to wire in 1 box per coil to make this work which can get very expensive as well as difficult to install due to space issues.
Hi fune2010,
Yes, for your application, the MSD-8241 coils will work great without the use of an MSD Ignition box.
MSD make a quality ignition I've had mine on my Dodge Charger for years after installing the 6AL my Car ran so much better! I recommend MSD products to anyone.
If you use a Blaster 2 coil with the digital box, and MSD plug wires together, you will get anywhere from 8-20 Horsepsower depending on the engine, and setup you have.
If I put one of these things in my factory stock 97' VW Golf 2.0, does it cause the car gain or lose gas mileage with normal driving? I am a commuter and not the racer type.
Hello i swapped out my 2.3l motor and put in a '79 302 pace car motor in. the ignition box is not working. Will a 6A be compatible with my setup?
I have a 2008 Dodge Magnum R/T Hemi 5.7 what msd can I use
Installing just 1 box will not work on your application due to your engine having 6 separate coils. These ignition boxes are only capable of operating 1 coil, so you will need 6 ignition boxes to make this work. You cannot hook these boxes to a 48 volt source either. They are designed to only handle 12 volts and hooking it up to a 48 volt source will overload the box burning it out.
I have an Peugeot 206 1.4 8v petrol engine with direct ignition (1 coil for 4 cilinders).
Any options for my car?
can i use MSD coils without MSD ignition boxes ?
Mercury Grand Marquis 97 V8 4.6L
i’m not professional + i just want better spark + I don’t want complicated things .
will this work (MSD coils + Better wire set spark plug + better spark plugs) ?
this fit to ford focus 2006 hatchback??
These boxes produce 132 mJ and 45,000 volts of spark energy while drawing .7 amps of energy per 1,000 rpm's. This is much more voltage to the plugs than a stock ignition system is capable of producing.
We can offer the MSD DIS-2 Plus ignition. Our part number MSD-62112. We highly recommend that you review the instructions sheet to better under stand how it will need to be installed. I will message you te link to the instruction sheet since we cannot place the link in the comment box.
Any suggestions extremedrivr?
will these work with any distributor?
any horsepower gain??
I have a 95 Chevy Tahoe 5.7L V8. Which MSD Ignition Box will function properly with it?
+Anton Phillips,
Either the 6A or 6AL will work just fine for you but will require some additional parts (coil, wire harness, plug wires, etc..) to complete the install. Give us a call and we can help you match the proper parts. 1-330-630-0240.
I look for ya, but can you tell me what year is it please??
Does this benefit stock engines or do I need some type of boost before installing?
Jonathan murillo ,
Installation of an MSD box will improve just about any ignition system!
nice , thank you very much
I have a carburated vg30 , which one i should take?
amer albakri,
We need some additional information from you. Can you give our tech department a call? 1-330-630-0240. We look forward to your response. Thanks for watching!
I ordered the msd street fire cdi and have had nothing but issues after 2 starts of my motor, now the car starts runs fine then 10 minutes later it cuts in and out, the box led light flashes and my motor tries to die or does die. I try to restart it after thia issue and it wont start, let ut sit for 20 mins and it fires back up agsin and then does this whole thing all over again. This is a NEW box! Not even a month old with 4 starts total on it and professionally installed, any ideas of what this can be? All connections have been checked and in great working order and is hooked up properly and the white mag pickup is heat shrkinked and all wires insulated
OneBad88S10 , We are sorry to hear that you are having issues with your new ignition. Do you happen to have an order number? We would like to address this issue.
Ill see if i can find the info for you. Do i post it here or email you or what?
I just bought a MSD Blaster 2 8202, I would like to know if I can match it to a MSD Street Fire 5520 and if you guys can tell me what kind of spark plugs, wires and distribuitor head that would be great.
My ride is an old and humble 97 Sentra 1.6L GA16DE.
Hi jamdc2000,
The 8202 coil will be fine with the Street Fire box. The other components are not available from MSD but should be a Brass terminal distributor cap, a spiral core ignition wire and the standard replacement spark plug.
great thanks
Are there available for my yamaha TDM 900A 2006?
Hi George Malamis,
We are sorry to say that we do not this part available for your application. Good luck!
my chinese Top Street Performance dizzy works just as good and it cost 38.00 bucks
model 6701R flame thrower coil with 45,000 volts
I have a stock 350 Chevy. Typical. What is a good box that won't hurt my engine but give me noticeable power
+James7796ify ,
An ignition amplifier box was originally designed for higher output motors because of their increased cylinder pressures due to larger cams and raised compression ratios. These upgrades typically expose the weakness of the ignition systems. To add one to a stock motor and say you would actually make more power would be somewhat disingenuous. But, you may experience better starting both hot & cold, improved throttle response and a slight fuel economy increase.
Thank you for the response! I'll keep that in mind
+Summit Racing. I have a 2008 dodge magnum rt 5.7 Hemi. which MSD ignition controller can I put on that.
9 june 2000, anny more info? chassis number, engine code?
i want the 6al digital ine on my 318 so bad.... 87 Chrysler fifth ave
I have a 1999 gmc Yukon wants the best to put n my truck
+brian smith,
We need some additional information from you. Can you give our tech line a call? 1-330-630-0240.
Thanks!
Summit Racing I got a 04 Monte Carlo as supercharged what would be the best one for it
lol 8k i need that 8k chip for my slowtary
Super Power theets xD
Friedburger, better get is butt back to his job at Car Craft, and write a new article.