Hey! thank you for your work. I have a question. Can I use WS2815 instead WS2118? In terms of WS2815 how I should connect the led strip - directly to the car power or different way? Appreciate your help
I’m Having trouble with this code, the orange option show a green Chaser dot when turn off, and i’d like to suggest a option to Dimmer the drl with park lights on, this way we make the drl signal with motor on, and dimmer with park lights on… thank you
@@HAZITECH i fixed by setting the rgb_dim manually on the drl_off, with variables it shows green, with the color code it shows the color… don’t know why, but works
Hello brother god bless you i tired this and it looks awesome thank you I am having one issue tho Every thing worls fine exept the righ blinker when i unlock the car only the left blinker blinks but only when unlocking or locking when turning or when in hazard mode the right light works perfectly any idea how to fix it please
Sir, do the resistor had to have the same watt? Cause i'm hard to find the same watt in my region but i'm easy to find the resistor with the same resistance.. sorry for my bad english🙏
Hello, I created Modern_Car_Front_Light_V1. Thank you very much. I have a question, please tell me how to change the color of the daytime running light.
Good afternoon. can you please tell me how to do it in a sketch so that when the main light (low beam) is turned on, the brightness is reduced. The turn signals remained unchanged. Thanks in advance!!!
I want to use pins d2 and d8 as signal pins for the left and right strip lights, can you suggest me, currently I see only d2 control all, it's quite inconvenient
Hi... Do you think I can add more "lines" and inputs to this code?... I have an aftermarket car alarm system with keyless entry , and I want to add a feature like modern cars. - when i open the car with the remote control : DRL are on *if no 12v in acc about 30s or 1 mn, DRL are off * if 12v acc is on before the time, DRL stay on - when 12v acc is off : DRL are on - when i close the car with the remote control Add a delay of 30s or 1mn DRL are off Do you understand what i want?
No. You can just give 12v positive to signal wires and test. If you are working with just 5V, then give input signal to resistor connection joint where 10k and 22k joins.
@@HAZITECH Thank you very much I could repair it, you will have whats app I have questions and I would like you will help me thank you very much and your work is very good
Step down voltage regulator is required to power up the LED strip. Arduino 5V out current is not nearly enough. And yes all the resistors stay the same. Use a good quality power regulator as pixel LEDs are power hungry.
This is awesome, i'm about to buy a pair of used headlights and I want to try this out. Is this good for any light condition? I want to use this drl turn signal as main and not use the headlight turn signal. Thanks for this!
Sir, your all project is great 👍👍👍 Can I request the code in this video, 1. How if I want Change the color PARK ON with the switch button, so not change on the coding every time. 2. And Use eeprom library, so the coding still work with the last choice Thank you verymuch... GBU 🙏👍
I have tried this project at home but the led animation is not like in your video, I have followed the wiring instructions in your video and coding using your code please answer thanks
Make sure you have connected all the resistors as mentioned and ground it. Otherwise it won’t work properly. It should be your wiring as 100+ people already made this and contacted me.
Hello, I think your idea is excellent, I even ordered everything, got it delivered but I don't know how best to solder it! I've seen the plan but I don't know how I can solder ground with DRL 12V and turn signal 12V with a resistor, for example can you put instructions on how to solder it on RUclips? That would be great, I love your channel, great things to imitate!
Hello, excellent work I love it ❤ I have a question, can we connect the controller to a Bluetooth module with an external app to make the Led strip work with angel eyes and demon eyes rgb and the secuentials that are in the app as additional illumination mode (like demo mode for meetings)
Yeah can do that. Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
I successful already to installed arduino software . But , once i try to verify the coding that you give .(FastLED.h:No such file or directory) . Why sir ??
Please, sir, make the Sen Runing module with the welcome light combined with the SP110e module for the twilight animation. but by using a relay circuit
Hello brother, could you help me with adding a dual strobe effect(white color) along with the above circuit and code(DRL + Indicator + dual strobe). Adding up a toggle switch for DRL and strobe effect input.
Hello brother, I just wanted to ask that if I want to power two strips of 110 leds will the arduino nano be able to power them or will it fry the board or do I need to power the leds separately?
Thankyou brother. www.electronicscomp.com/nano-v3.0-development-board-clone-compatible-model?gclid=EAIaIQobChMI2du8g8yn-gIVTA4rCh3HMwTfEAQYASABEgIaVvD_BwE www.electronicscomp.com/300w-20a-dc-dc-buck-converter-step-down-module-constant-current-led-driver-module?gclid=EAIaIQobChMItPLz98un-gIVTRwrCh33fwqGEAQYASABEgIr6vD_BwE Can I use these both?
Wowww. Thank you. can i ask you something ? Dynamic Turn Signal and Daytime Running Light (DRL) & Police Vip led All in One , is it possible ? Please please please. Thank you
Hello Brother, First, of all thank you so much for this detailed project. My hunt got stopped at your video where I got my desired effects. This is so excellent that a complete newbie like me has done this so easily, just because of your awesome video. I managed to run this code for a lesser number of LEDs. If I use 144+ LED, the park light animation works but does not stop and keeps on running in the loop. I am trying to make it for 2 continuous LED strips (288 LED's) for my Nexon's underhood DRL lights. Can you please guide me on where do I need to change the code? or anything else you want to suggest?
@@HAZITECH Sorry to update late, it's not a bug in the code but the power issue. I tried to resolve the issue and found the solution. When using 144+ leds (I am using 340 leds for Nexon bonet) we need to either decrease led brightness or increase Ampere in led power supply. 3Amp is not sufficient. Also 5v 3A power supply get very hot with 144+ LEDs. I used fastLED.setBrightness to control brightness globally and at 55% brightness it worked perfectly... I hope this will help others if they encounter same issue... Thanks a ton for your awesome work... 🤗🙏
Due to the large number of comments, going forward, I have to give priority to my channel Subscribers when replying. So consider Subscribing. Thank You!.
Hi my dear, tell us can you make a soldering video for us, how to solder the nano with resistors on the plan, can you do that for us? I mean the plan for the dynamic turn signal with daytime running lights, PLEASE PLEASE PLEASE????
Colours are given in CRGB(Red, Green, Blue) format. You can change the values in the code to achieve the required colour. For additional information, please reach out to us at info.hazitech@gmail.com or via WhatsApp at +94779299171
Hi. Very nice :) Im looking for small help :) I want to use 2 ardruino for my headlights ( 1 for each headlight for clean plug&play installation ) but I have a wee problem with DRL startup animation. I mean, when 2 LED strips are connected, like on the video, the animation looks perfect, but if I want to use just 1 Led strip then the animation starts from the center. The turn signal works like I want after a simple change on - BlinkerLEDs NUM_LEDS / to 1 and what I need is similar function for DRL so the animation will start from the end of the led strip not from the centre. Can anyone tell me where I have to edit source code to to make the animation look the way I want? Thanks
Hi sir...awesome work by the way...just need to know if the drls and indicator lights are bright enough in direct sunlight....do we need to use 2 strips of neopixel lights in each headlights to increase the brightness??? These LEDs are so power hungry..so....have you tested the brightness of the leds under daytime???
Hi. You could use a simple diffuser on top of the LED strips to make it more visible under direct sun light. But these 144LED/m strips works well in direct sunlight too. Test it before you install. Thanks 👍🏻
@@HAZITECH I just bought all of the including set, to do on a bike. I have this today (my bike) ruclips.net/video/IwUXlHEzxyI/видео.html but yours is way more cool. and have a bluetooth controller, to upload and edit patterns would be awsome....
@@HAZITECH maybe u know the VW mk6 headlights. I didnt look inside them, but i think it will be tricky to get in the drl leds, with your led strip.. i dont know, and no one has a tutorial done for it
Hi sir, this is the great project.. Appreciate it so much.. I was practiced to my car and it's work.. Anyway, can i set brightness for this sketch? How? May u create the update sketch please? And can i use a button to change DRL or parking light color ? Hopefully you make update version this project with i asked.. And... Sorry for my bad English ✌
Hello Brother, Finally, I was able to complete the project. But when I installed it in my car, I found different behavior in animation than while testing at home. When Hazzard or indicator blinks, it flickers with a blue LED once at every cycle. The same code works well while testing at home. I have tried increasing the voltage from 4.5 to 5.5 volts and the amp from 2 to 8.5 with full /half brightness, but nothing helped. Do you have any ideas or suggestions? That will be of great help. I am almost at the last stage of completion. FYI, I am using a total of 322 LEDs for my car. Also, let me know If there is any way to show you how the animation looks when installed in the car. Thanks in Advance.
@@HAZITECH Exactly that's what I did and able to solve the problem.. but still it miss the right side blink once at start for (hazard signal) when DRL is off. Tried increasing and decreasing delay without success... Looking out for another possibility to connect indicator bypassing the cars blinkers .. so we do not need to match blinker speed. 👍🤗 Thank you so much... Your continued support for answering my queries is really appreciated !!🤗👍
@@HAZITECH One more thing, turn signal animation looks slow even after making turn signal speed to "0". What could be the solution ? And this animation speed depends on what ? I mean microprocessor or led strip itself ?
Have you burn the boot-loader of the microcontroller?. If not please follow my ATtiny85 playlist and go through very first video. Without it the microcontroller runs at a lower frequency.
@@HAZITECH kohomada danne kiyala poddak kiyanna puluwanda???.mama first time use karanne.okkoma drivers denma exsample eke blink eka upload kala eka upload una.meka wenne ne nea????
Here is my similar project RGB LED Easy Desk Set Up | SP110E Bluetooth Pixel LED Controller | Cost Effective RGB Lighting ruclips.net/video/zHEqBax0pRE/видео.html
Your Voltage devider solution is messed up. It will overshoot the max rated 3v3 per pin by almost double the voltage on some cars when turned on. Damage can occur right away but most likely it will just start acting up slowly until breaking a few days/months after
To start with, Arduino Nano works with 5V not 3v3. And this system will work safely in 11-15V voltage range. Please do your math. My fans have been using these for years without any issue. You can add zenor diodes for extra protection too.
Find more vehicle LED Light Systems here
ruclips.net/p/PL4dsTE_604gsyR__ym22681pabDq9zSTR
Can I ask for a code link?
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
@@HAZITECHwhat price code
Love this!!! You should consider making kits for people like us who are completely useless at soldering things. I’d buy two sets for front and rear!!!
Ha ha thanks. Sorry but I have a very limited time.
My first comment on RUclips and it's for you. Awesome job, you deserve more subs only for show us your knowledge
Wow, I’m truly honoured. Thank you so much. I’ll do my best 🙏🏻.
Hey! thank you for your work. I have a question. Can I use WS2815 instead WS2118? In terms of WS2815 how I should connect the led strip - directly to the car power or different way? Appreciate your help
I haven’t tried it. But should work. In any case use a 12V voltage regulator as the car power could vary.
Friend, excellent projects for modified cars you are a cracks, it has helped me a lot, I hope you continue to do more projects for cars, thank you
Hey, glad that you are getting practical uses from my projects. Yes I will continue. Thanks a lot.
Hi brother, how can I contact you better in regards to a question for this Arduino project? Kind Regards !
if this is made separately it is not divided by 2 how to code it. can you please help? thanks
Here you go
ruclips.net/video/TrgbTYC2Pfg/видео.html
I mean, in one arduino, the left and right turn signals are programmed but the LEDs are separate, can you do that, sir?
I’m Having trouble with this code, the orange option show a green Chaser dot when turn off, and i’d like to suggest a option to Dimmer the drl with park lights on, this way we make the drl signal with motor on, and dimmer with park lights on… thank you
Hmm. That's strange. I'll see about that. Please subscribe to my channel to see the updates. Thanks!.
@@HAZITECH i fixed by setting the rgb_dim manually on the drl_off, with variables it shows green, with the color code it shows the color… don’t know why, but works
Glad you worked it out.
Hello brother god bless you i tired this and it looks awesome thank you
I am having one issue tho
Every thing worls fine exept the righ blinker when i unlock the car only the left blinker blinks but only when unlocking or locking when turning or when in hazard mode the right light works perfectly any idea how to fix it please
Hmm that is bit strange. I’ll check it when time permits. I have no idea on it unfortunately.
aiye mama oka haduva. Arduino uno ekakin. Wada karanne nane.😢 60led ws22b ekakin. Mokakda awla aththe?
Code eka hariyata upload unanam, wiring diagram eka harinam, parts awulak neththam 100% weda karanna oona malli. Godak aya heduwa.
man ayeth try karannam.
Ok 👍🏻
Sir, do the resistor had to have the same watt? Cause i'm hard to find the same watt in my region but i'm easy to find the resistor with the same resistance..
sorry for my bad english🙏
No, it is totally fine to use any watt as long as the resistor values match. BTW, your English is perfect 👌🏻
@@HAZITECH Thank you sir.. my project are finished, thanks for your help. BTW, thanks for the compliment :)
How I can use 2 led strip for right signal lamp and left signal lamp?
Just parallel the LED strip connections. You can use any number of strips as long as you have a decent amp power supply.
Sir, may I request DRL turn signal + WLED.. so can change use smarphone for change DRL color
It's not that easy to combine the two. And also it would require a working Wi-Fi connection.
Hello, I created Modern_Car_Front_Light_V1.
Thank you very much.
I have a question, please tell me how to change the color of the daytime running light.
All colours are given in CRGB(Red, Green, Blue) format in the code. Just look for it and change the values. Cheers
@@HAZITECH Thank you for your reply.
It is set by the program.
understood.
You are welcome
Please LIKE and SUBSCRIBE to grow the channel.
Good afternoon. can you please tell me how to do it in a sketch so that when the main light (low beam) is turned on, the brightness is reduced. The turn signals remained unchanged. Thanks in advance!!!
I'm currently doing the next version of this. I'll include it in to the code.
Could you make the SP110E controller control the DRL light on this video
Yes. Planning to do it soon.
this is awesome. thank you. As a few others have commented I would love to have a mode with strobes and/or nightrider lights in your next version!!!!
Thanks a lot. And definitely do so. Tail light was made with it and uploaded.
Hi how do i remove the animation on startup please i love the setup im looking to start the drl as solid light without the led show please
It requires a considerable amount of code editing. I’ll release the next video with the option of animation on and off.
if it is connected to the sp105e module, what is the wiring diagram like? can you make a tutorial?
I’m planning do a video on that soon. Stay tuned.
I want to use pins d2 and d8 as signal pins for the left and right strip lights, can you suggest me, currently I see only d2 control all, it's quite inconvenient
Then a totally new code should be written.
how to make drl colour rgb and make a sp110e or other rgb controller to combine this program ??
sorry for my bad english 🙏🙏🙏
Planning to do it in my next video. Stay tuned.
@@HAZITECH thank you ,I'll always be waiting 🎉👍👍👍🙏
Hi... Do you think I can add more "lines" and inputs to this code?...
I have an aftermarket car alarm system with keyless entry , and I want to add a feature like modern cars.
- when i open the car with the remote control :
DRL are on
*if no 12v in acc about 30s or 1 mn, DRL are off
* if 12v acc is on before the time, DRL stay on
- when 12v acc is off :
DRL are on
- when i close the car with the remote control
Add a delay of 30s or 1mn
DRL are off
Do you understand what i want?
Yes I do. Please send me the same request in an email to info.hazitech@gmail.com. I can make it for you.
@@HAZITECH thx
Can the input (DRL Swict) be placed on (Arduino nano pin D3)
YES. You can change the pins as you want in the first few lines of code.
@@HAZITECH input d3 using the SP105e bluetooth module
@@HAZITECH How do I make the program with the SP105e device to the Arduino nano d3 input?
Can do that
does the program stay the same?
can you make one with rbg as well?
Yes. Reach out to us at info.hazitech@gmail.com or via WhatsApp at +94779299171 for any personalised services or custom job requests.
Hello, should I connect everything to the vehicle to test it
No. You can just give 12v positive to signal wires and test. If you are working with just 5V, then give input signal to resistor connection joint where 10k and 22k joins.
@@HAZITECH thank you
Friend, could you help me, I get a message at the end that says serial port not selected
Hey, in Arduino IDE, go to tools, then port and select the COM port of Arduino.
@@HAZITECH Thank you very much I could repair it, you will have whats app I have questions and I would like you will help me thank you very much and your work is very good
Hey you can connect me via HAZI TECH FB page.
Hello mate is it possible to edit the DRL or parking light into fastled? How thank you for reply..
Hi. Yes it is possible. But it is not that straightforward. I’ll add that feature to my next version.
@@HAZITECH very much thank you will wait for it..
I just wondering.. the nano is 7-20 volt compatible, and there is grd, +5v & +3,3v on the board, so why use a dc-dc step down ?
And do I use the same resistor if I use 20 led or 144 led
Step down voltage regulator is required to power up the LED strip. Arduino 5V out current is not nearly enough. And yes all the resistors stay the same. Use a good quality power regulator as pixel LEDs are power hungry.
my order is here :D all connected, trying to upload the sketch, but i says "serial port not selected" please advice
changed the usb cabel, and then it worked
Awesome 👌🏻
I'm always impressed by watching the video.
I get an error with #include when writing.
What to do?
You have to include FastLED library first. Refer the below video.
ruclips.net/video/-oPCpF1Unk4/видео.html
Thank you, I will try.
I want that after the full drl is turned on, to send current 12V to the low beam like audi, without affecting audi light sensors. Is it possibile?
I’m afraid that I have no idea on how the light sensors work. But you can definitely activate a 5V relay after DRL to control the low beam.
How to edit the code and diagram, running light colour changeable with button. Sorry for my bad English. please help me
Please browse my other videos and get an idea. I've done similar projects
How to connect the switch.. Or just supply 12v as shown in the picture...
To turn it on and off?
Sir, can u please make wiring model and arduino code like this for motorchycle, but drl mode can control with sp110e or other? Thanks for help
Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
This is awesome, i'm about to buy a pair of used headlights and I want to try this out. Is this good for any light condition? I want to use this drl turn signal as main and not use the headlight turn signal. Thanks for this!
You can try the strip or you can buy high power individual WS2812B LEDs and join together.
Sir can u plz send the link that we can buy these pixel led .
The link is given in the video description.
Hello! If I only want DRL and no turn signal? Do I just delete the turn signal code?
It is not that simple as turn signal code is all over the main code. You have to modify several places of the code.
Sir, your all project is great 👍👍👍
Can I request the code in this video,
1. How if I want Change the color PARK ON with the switch button, so not change on the coding every time.
2. And Use eeprom library, so the coding still work with the last choice
Thank you verymuch...
GBU 🙏👍
I'll add these changes to my next revision soon.
Would u need two modules or just one for the two headlights!! Also are these 12v input ..
Just one. Yes 12V input
@@HAZITECH and no load resistor needed for the indicator as this is for my car project 🙂 cheers for your help 😌
You should be good 👍🏻
@@HAZITECH no load resistor required then !
Yes try without.
I have tried this project at home but the led animation is not like in your video, I have followed the wiring instructions in your video and coding using your code please answer thanks
How many LEDs are you using and did you update that LED number in the code?
@@HAZITECH 144 led total, yes i have been update the led number in code,
Make sure you have connected all the resistors as mentioned and ground it. Otherwise it won’t work properly. It should be your wiring as 100+ people already made this and contacted me.
Hello, I think your idea is excellent, I even ordered everything, got it delivered but I don't know how best to solder it! I've seen the plan but I don't know how I can solder ground with DRL 12V and turn signal 12V with a resistor, for example can you put instructions on how to solder it on RUclips? That would be great, I love your channel, great things to imitate!
Solder resistors and other components on a perfboard and just tap the wires from the light and feed to the system. Super thanks for the compliment 😊.
Hi
How can I dim the DRL when headlights are switched on
It requires a new signal input from the headlights and code modification. I'll add it to my next revision.
Hello, excellent work I love it ❤
I have a question, can we connect the controller to a Bluetooth module with an external app to make the Led strip work with angel eyes and demon eyes rgb and the secuentials that are in the app as additional illumination mode (like demo mode for meetings)
Yeah can do that. Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
I successful already to installed arduino software . But , once i try to verify the coding that you give .(FastLED.h:No such file or directory) . Why sir ??
Please install FastLED library. There is a video I made on that. Search “HAZI TECH FastLED” in RUclips
Thanks. We are waiting for the continuation of the projects.
Sure. Thanks 😊
Please, sir, make the Sen Runing module with the welcome light combined with the SP110e module for the twilight animation. but by using a relay circuit
I got this request many times. And yes I’ll do it soon.
@@HAZITECH thank you for responding to my comment, I hope you can make an example request from me
@@HAZITECH the drl uses 2 output data for the right and left
Allow me some time
@@HAZITECH ok sir, waiting for the next video about turn signal running combined with the sp110e module
Is it possible to swap the arduino nano for the smaller attiny85 in the same configuration?
Yes it is possible.
Hello brother, could you help me with adding a dual strobe effect(white color) along with the above circuit and code(DRL + Indicator + dual strobe). Adding up a toggle switch for DRL and strobe effect input.
Hi it requires some code updates. I'll add it to my next version soon.
@@HAZITECH thanks for the update brother😊. I'm waiting😊
Hello brother,
I just wanted to ask that if I want to power two strips of 110 leds will the arduino nano be able to power them or will it fry the board or do I need to power the leds separately?
You should power them separately brother
Thankyou brother.
www.electronicscomp.com/nano-v3.0-development-board-clone-compatible-model?gclid=EAIaIQobChMI2du8g8yn-gIVTA4rCh3HMwTfEAQYASABEgIaVvD_BwE
www.electronicscomp.com/300w-20a-dc-dc-buck-converter-step-down-module-constant-current-led-driver-module?gclid=EAIaIQobChMItPLz98un-gIVTRwrCh33fwqGEAQYASABEgIr6vD_BwE
Can I use these both?
Hi sir i love your project, can you make running signal with bluetooth or wi-fi controler for drl colour..? Thank you sir
I’ll try 👍🏻
Led matrix studio eken buduras malawak hadanko Malli godakalekin buduras malawak haduwe nane hoda ekak
Try ekak dennam ayye 👍🏻
Looks good 👍
I want to try, but I want to ask,
The sequential sign light follow the flasher?
Or running standalone from arduino..?
It is running standalone from Arduino. However you can adjust the delays to match with the flasher.
@@HAZITECHokay 👍🙏
Some times, when available, try to make running from flasher...
I think you can do it, because you are expert about it 😁🙏👍
Wowww. Thank you. can i ask you something ? Dynamic Turn Signal and Daytime Running Light (DRL) & Police Vip led All in One , is it possible ? Please please please. Thank you
Yes it is possible. I’ll make it happen. Just give me some time 😉
@@HAZITECH thank you so much. I'm so excited. I'm looking forward. I follow you 😉
Hello Brother,
First, of all thank you so much for this detailed project. My hunt got stopped at your video where I got my desired effects. This is so excellent that a complete newbie like me has done this so easily, just because of your awesome video. I managed to run this code for a lesser number of LEDs. If I use 144+ LED, the park light animation works but does not stop and keeps on running in the loop.
I am trying to make it for 2 continuous LED strips (288 LED's) for my Nexon's underhood DRL lights.
Can you please guide me on where do I need to change the code? or anything else you want to suggest?
Wow thanks a lot. It could be a bug in the code. I’ll take a look when the time permits.
@@HAZITECH Sorry to update late, it's not a bug in the code but the power issue. I tried to resolve the issue and found the solution. When using 144+ leds (I am using 340 leds for Nexon bonet) we need to either decrease led brightness or increase Ampere in led power supply. 3Amp is not sufficient.
Also 5v 3A power supply get very hot with 144+ LEDs.
I used fastLED.setBrightness to control brightness globally and at 55% brightness it worked perfectly...
I hope this will help others if they encounter same issue...
Thanks a ton for your awesome work... 🤗🙏
Awesome. So glad that you shared your experience. 💐
@@HAZITECH Thanks again... Looking forward for more such a awesome videos... God bless you brother !! 🤗🙏
How is the installation when combined with the sp110e?
Sorry I have no idea on that.
@@HAZITECH oh cmon you have it,
I do not have sp110e to test 😂
Should I add rellay 5v to combined it?
Yes you can do that. Then you can trigger the relay with the required signal or from a switch to enable sp110e
Friend, this is an amazing project.
Is it possible that the DRL starts like die DRL from RS6 C8? And could you add a strob function to it?
Thanks a lot. I’ll see what I can do about it. Allow me some time.
@@HAZITECH thanks Friend. I forgot one think. Is it possible to reduce the brightness of the DRL when xenon is running?
Yes of course. Colours are given in CRGB(Red, Green, Blue) format. Find the code lines and lower the values.
Due to the large number of comments, going forward, I have to give priority to my channel Subscribers when replying. So consider Subscribing. Thank You!.
Hi my dear, tell us can you make a soldering video for us, how to solder the nano with resistors on the plan, can you do that for us? I mean the plan for the dynamic turn signal with daytime running lights, PLEASE PLEASE PLEASE????
Hey. I’m sorry as I may not be able to do that with my tight project schedule. You can find many soldering tutorials online.
How to add another drl color??
Colours are given in CRGB(Red, Green, Blue) format. You can change the values in the code to achieve the required colour. For additional information, please reach out to us at info.hazitech@gmail.com or via WhatsApp at +94779299171
I like your work... verry fast 🥰👍
Thanks bro 🤜🏻
Hi. Where can I download the arduino code? Thanks
As usual the code is linked in the video description.
Hi.
Very nice :)
Im looking for small help :)
I want to use 2 ardruino for my headlights ( 1 for each headlight for clean plug&play installation ) but I have a wee problem with DRL startup animation.
I mean, when 2 LED strips are connected, like on the video, the animation looks perfect, but if I want to use just 1 Led strip then the animation starts from the center.
The turn signal works like I want after a simple change on - BlinkerLEDs NUM_LEDS / to 1 and what I need is similar function for DRL so the animation will start from the end of the led strip not from the centre.
Can anyone tell me where I have to edit source code to to make the animation look the way I want?
Thanks
May I know what you mean by 1 LED strip for both headlights?. You mean one continuous strip?.
@@HAZITECH yes I want to use one continuous strip with 30-40 Leds with 1 Arduino in each headlight.
Hi sir...awesome work by the way...just need to know if the drls and indicator lights are bright enough in direct sunlight....do we need to use 2 strips of neopixel lights in each headlights to increase the brightness??? These LEDs are so power hungry..so....have you tested the brightness of the leds under daytime???
Hi. You could use a simple diffuser on top of the LED strips to make it more visible under direct sun light. But these 144LED/m strips works well in direct sunlight too. Test it before you install. Thanks 👍🏻
@@HAZITECH Brother, any reference or link to buy flexible diffuser for this 144 led strip ? I searched a lot but didn't find any over the internet.
How to make only drl effect and with red color
I’ll add the options to next version which is coming soon
if I put 2 x 10K resistors does it works too ?
Noooo. It will burn the arduino. Use exactly what is mentioned.
I've tried it just like the video with 22k and 10k resistors and input pins still floating gives 1 and 0 randomly
What should I do ?
Let’s chat in WhatsApp
Hi bro, this code working with WS2811?
Yes bro.
FastLED.addLeds(leds, NUM_LEDS);
Replace the above code line with the below
FastLED.addLeds(leds, NUM_LEDS);
@@HAZITECH thank you
You are welcome
Cool project, can you make this a bluetooth controller with direct 4 input triggers for controlls for lights
I'll see what I can do about it.
@@HAZITECH I just bought all of the including set, to do on a bike.
I have this today (my bike) ruclips.net/video/IwUXlHEzxyI/видео.html but yours is way more cool.
and have a bluetooth controller, to upload and edit patterns would be awsome....
Awesome. I’ll upgrade it soon 👍🏻
Aiye mata denaganna puluwanda RGB led streep godak ganan na ovel led light dala karana weda tikak danna k
Ok malli issrahata dennam
how to change colour pink or purple ? to DRL
Hi. Colours are given in CRGB(Red, Green, Blue) format in the code. Change those values as you need.
added the sp107e module so that the evening light can adjust the color
Yeah planning to do so
@@HAZITECH okay I'm waiting for the next project
Sure 👍🏻
Где можно скачать Ваш скетч на этот проект?
Для приобретения кода свяжитесь с нами по адресу info.hazitech@gmail.com или WhatsApp по телефону +94779299171.
Can u show us how to install in car?? Especially wiring? You are amazing
I see what I can do. You just need to tap the mentioned power lines to your back lights and that’s it.
@@HAZITECH i would‘ve thought it goes on my front headlights in the drl lights and with the turning signal, can we contact us somewhere?
Sorry my mistake. It should be the front lights wires. One unit per headlight.
@@HAZITECH maybe u know the VW mk6 headlights. I didnt look inside them, but i think it will be tricky to get in the drl leds, with your led strip.. i dont know, and no one has a tutorial done for it
Hi sir, this is the great project.. Appreciate it so much.. I was practiced to my car and it's work..
Anyway, can i set brightness for this sketch? How? May u create the update sketch please?
And can i use a button to change DRL or parking light color ?
Hopefully you make update version this project with i asked..
And... Sorry for my bad English ✌
Hey. Sure. I’ll add those to my next version soon. Stay tuned.
@@HAZITECH thank you, I'm waiting sir 😊
Can i use it on Ws2815 12V?
Sure you can. But unfortunately I don’t have WS2815 to test with. Need to order.
@@HAZITECH i Just tried to coding your sketch "fastled v1" via smartphone but it not be found, would you teach me how to do it, please? Tx
Sorry as I’m nit using android. In any case, you have to add the FastLED library first to get the code compiled.
Привет.
Где можно скачать СКЕТЧ ???
Для приобретения кода свяжитесь с нами по адресу info.hazitech@gmail.com или WhatsApp по телефону +94779299171.
Thank you brother for your help😄
Anytime man.
Hello Brother,
Finally, I was able to complete the project. But when I installed it in my car, I found different behavior in animation than while testing at home. When Hazzard or indicator blinks, it flickers with a blue LED once at every cycle. The same code works well while testing at home. I have tried increasing the voltage from 4.5 to 5.5 volts and the amp from 2 to 8.5 with full /half brightness, but nothing helped.
Do you have any ideas or suggestions? That will be of great help. I am almost at the last stage of completion.
FYI, I am using a total of 322 LEDs for my car. Also, let me know If there is any way to show you how the animation looks when installed in the car.
Thanks in Advance.
Hi, You have to change the blinker delays as shown in the video to match with your turn signal frequency. Try increasing the delay a bit.
@@HAZITECH Exactly that's what I did and able to solve the problem.. but still it miss the right side blink once at start for (hazard signal) when DRL is off. Tried increasing and decreasing delay without success... Looking out for another possibility to connect indicator bypassing the cars blinkers .. so we do not need to match blinker speed. 👍🤗
Thank you so much... Your continued support for answering my queries is really appreciated !!🤗👍
@@HAZITECH One more thing, turn signal animation looks slow even after making turn signal speed to "0". What could be the solution ? And this animation speed depends on what ? I mean microprocessor or led strip itself ?
Oh yes. Bypassing the blinker works like a charm. And you are welcome
Have you burn the boot-loader of the microcontroller?. If not please follow my ATtiny85 playlist and go through very first video. Without it the microcontroller runs at a lower frequency.
please add sp110e module. Thanks
Will do soon.
Can i use with Attiny85?
Yes you can
@@HAZITECH please how to making wiring diagram please
You can take a look at my ATtiny video playlist and get an idea. The code and wiring stats the same except the input output pin numbers.
Thanks for your sharing, it is very nice project
Thanks a lot
Hazi bro..tava me vage vedio digatama karanna..niyamai👍👍👍
Sure brother. Thank you very much.
can i buy this codes?
Yes of course. Send an email to info.hazitech@gmail.com
Yor code sketch is empty bro, can i have the new link?
May I have your email adress?
I just checked and the code is there. Please download the zip file again and see
Can i change installation the Ws2812 with pararel system?, because i Will combine with sp110e? What i have to do?
But what happen its mine the drl Light Just stuck bro, it cant be run/walking Just stuck on ice blue, what happen?
So it does not respond to signal light?
Bro man meka upload kala aath meka upload wenne ne. Error ekak anawa seriel code kiyala
FastLED eka library eka dala nam thiyenne wena awulak enna widihak na brother.
@@HAZITECH kohomada danne kiyala poddak kiyanna puluwanda???.mama first time use karanne.okkoma drivers denma exsample eke blink eka upload kala eka upload una.meka wenne ne nea????
Menna brother
ruclips.net/video/-oPCpF1Unk4/видео.html
@@HAZITECH thank you bro💪👍
You are welcome bro. Wede hari gihama kiyanna.
Thankyou for share and tutorial...👍👍👍
You are welcome 🙏🏻
Sir. please make a tutorial for the turn signal running, stay rgb, and turn on the welcome meteor light module like in the video sir. please
Hi. I’ll do the next version soon. Stay tuned.
@@HAZITECH Thank you sir. I'll always be waiting 🥳🙏
Left right channel deka wena wenama ic dekakin control krnna mkkd code eken wens krnna ona
Me thiyenne e wage karapu ekak
ruclips.net/video/TrgbTYC2Pfg/видео.html
@@HAZITECH eke daytime parking effect eka normal tiyenne 😞
Ow eeka eththa. Mama updated code eka dannam. Podi kaalayak denna.
@@HAZITECH balagena innawa ❤️❤️🙏🏻
Sure bro
How to get this code?
For code purchase with upgraded controller, contact us at info.hazitech@gmail.com or WhatsApp +94779299171
@@HAZITECH ok
Where can i get the code?
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
How to chane color orange sir
Hi the colours are given in CRGB(Red, Green, Blue) format. Just change the values to get the desired colour.
Thanks so much master😍🙏🙏🙏🙏
dear how to get this code
Please contact info.hazitech@gmail.com
Apa ini bisa dipakai di sepeda motor?
ya kamu bisa
what is DRL
Daytime Running LED
very cool man👍👍
Thanks a lot buddy 👍🏻
@@HAZITECH what if connect with controller via wifi or bluetooth smartphone android, with many color modes when the light is in standby mode??
Yeah it is doable. Need to think a little bit and come up with a full solution.
@@HAZITECH like this ruclips.net/video/EOLdbYOVBmU/видео.html
Here is my similar project
RGB LED Easy Desk Set Up | SP110E Bluetooth Pixel LED Controller | Cost Effective RGB Lighting
ruclips.net/video/zHEqBax0pRE/видео.html
lack of dimming mode when the light is on
It can be easily added. May be in next rev.
I'm not good at programming. Can you make a video to add that code?
Yes I’ll do a video
thank you very much
how much cost the code
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
This is amazing bro🍻 Thanks for share your idea.
Thanks bro 🙏🏻
Your Voltage devider solution is messed up. It will overshoot the max rated 3v3 per pin by almost double the voltage on some cars when turned on. Damage can occur right away but most likely it will just start acting up slowly until breaking a few days/months after
To start with, Arduino Nano works with 5V not 3v3. And this system will work safely in 11-15V voltage range. Please do your math. My fans have been using these for years without any issue. You can add zenor diodes for extra protection too.
@@HAZITECH ah well yeah then it will work. 5v logic boards aren't common though in my defense.
Cool. Thanks for the comment. I always appreciate it.
Knight rider KITT voice box Pleas i want to make my own one
I’ll see what I can do. If you have an example video share with me.
@@HAZITECH ruclips.net/video/RvuecLUC6ek/видео.html this is a video of a real one
thank a lot bro, u r a good man...
Thanks a lot 😊
hey bro
where is programme
Linked in the video description as always
Can’t open the google drive file..
Access the link with a PC not with a mobile phone.